IBM DataPower Operations Dashboard v1.0.12.0

A newer version of this product documentation is available.

You are viewing an older version. View latest at https://ibm.biz/dpod-docs.

Upgrade to 1.0.10.1 - Special Steps

Mar 22, 2020

Appliance Mode Users Only - Upgrade Should be Applied in 2 Steps

The upgrade will update your DPOD installation Operating System (CentOS 7.7). Therefore the upgrade command will be required to be executed twice:

For operating system update
For application software upgrade

Issue in Upgrading Cell Environment from 1.0.9.0 to 1.0.10.1

DPOD 1.0.10.1 has an issue that causes upgrades to fail in a cell environment. Follow the instructions below to avoid this issue.

Before running the upgrade, execute the following commands on each of the cell members:
# Cell MEMBERS only! mv /app/agentnode /app/agentnode-old mv /etc/init.d/MonTier-AgentNode /etc/init.d/Disabled-MonTier-AgentNode
Before running the upgrade, execute the following commands on the cell manager:
# Cell MANAGER only! mv /app/agentnode /app/agentnode-old