Appliance Mode Users Only - Upgrade Should be Applied in 2 Steps

The upgrade will update your DPOD installation Operating System (CentOS 7.7). Therefore the upgrade command will be required to be executed twice:

Issue in Upgrading Cell Environment from 1.0.9.0 to 1.0.10.1

DPOD 1.0.10.1 has an issue that causes upgrades to fail in a cell environment. Follow the instructions below to avoid this issue.

Before running the upgrade, execute the following commands on each of the cell members:

# Cell MEMBERS only!
mv /app/agentnode /app/agentnode-old
mv /etc/init.d/MonTier-AgentNode /etc/init.d/Disabled-MonTier-AgentNode

Before running the upgrade, execute the following commands on the cell manager:
```
# Cell MANAGER only!
mv /app/agentnode /app/agentnode-old
```