The steps described in this page will walk you through the process of deploying DPOD's software on the appliance created in the Appliance Installation phase.
Run the installApp command to start the product installation:
installApp |
DPOD will suggest a time zone based on your country selection, and display an 'Is the above information OK?' prompt. You may confirm the time zone configured by choosing 1 for “yes” or 2 for “no”.
If you reject the proposed time zone,you will nee to select the right one for you.
Enter your NTP servers information
After you finish entering the NTP data, DPOD echoes it back on the screen for verification and displays an 'Is this correct [y/n]' prompt.
Enter “y” to confirm NTP details as entered or “n” to re-enter the information.
Choose an environment name for this DPOD installation, each DPOD installation must have a unique 4-character environment name
If you are installing a second DPOD machine that will be used as the standby machine in a DR Active/Standby scenario, the environment name must be identical to the environment name of the active DPOD installation. |
On the following screen, the installation program will prompt you to select an installation configuration file
t
In some special cases, DPOD's support team will send you a custom configuration file. This would be the time to FTP it to the appliance, following the instructions received from DPOD's support team. |
If you choose to abort the installation at this stage (e.g. by using CTRL-C) and wish to start the process again at a later time, you will have to run the following command in order to undo changes and start the installation again:
cd /app/scripts
./montier_env_uninstall.sh
Rerun installation from step 3 but this time using the command :
installApp --clean |
Wait for the installation to finish.
Any errors will be logged to the installation log file, displayed at the end of the installation process.
The /installs/logs directory contains detailed install logs for each component.
After displaying the messages "Stopping/Starting ...", the installation will work in silent mode - without any further messages for ~ 5 minutes, this is a normal behavior.
When the installation is completed, you should see the following output:
r in screenshot
Login again as root or just use the "su -" command
su - |
continue to Installation Verification.
Minimize Resource Consumption - In this version, NO special steps required to install Developer Edition as was in previous versions |