The following table lists the available filters within DPOD.
Most sections of DPOD display only a subset of this list, as applicable to the data displayed in different sections.
Filters in IDG View
| Filter Name | Functionality |
|---|---|
| Application Data | Visible on the Deprecated Extended Transactions screen only, it is used to search user data. The use of this filter requires XSLT modification |
B2B Message ID | Visible in the Raw Message screen only. The B2B Message ID, From Partner ID, To Partner ID, From Partner Profile and To Partner Profile. |
| Category | Only show messages of the selected category or categories. Valid values: |
| Cause | Visible in the Restarts dashboard only. The restart cause (device initiated, user initiated, etc.) |
| Catalog Name | API Connect dashboards only. |
| Client IP | Only show messages and transactions originating on one or more client IPs. Valid values: Valid IP Addresses |
| Corr. Id | Only show information related to one or more correlation ids. Valid values: Correlation ids of extended transactions. |
| Device | Only show information related to the selected device(s). |
| Domain | Only show information related to the selected domain(s). Asterisk wildcard is supported. e.g. "Prod*" will match all domains that starts with "Prod". |
| Downtime Started | Visible in the Restarts dashboard only. The estimated time where the device was not available |
| Error Message | Only show transactions that failed, where the error message contains the term entered into the input box for this filter. Valid values: Free text |
| Free Text | Enter a value to search in multiple fields at once (depends on the page where the filter exists). |
| Front-Side Handler | Only show services going through the specific Front-side handler(s). Valid values:
|
Front URI | The URL the service exposes (Configuration Only) |
| Global Trans. ID | The Global Tansaction ID |
| In URI | Visible on Extended Transactions and Service URI Calls only. The URI that clients use to invoke transactions. |
| In URL | Visible on Deprecated Extended Transactions and Service URL Calls only. The URL that clients use to invoke transactions. |
| Message | |
| Message Code | Message code as reported from a log target of a monitored device. |
| Min Elapsed | Filter the displayed transactions by minimum elapsed time (in ms). Valid values: Non-negative integers |
| Min Request | Filter the displayed transactions by minimum request size(in bytes). Valid values: Non-negative integers Available since IDG firmware 7.6.0.8 and 7.7.1.2 for transactions of traditional IDG services |
| Min Response | Filter the displayed transactions by minimum response size(in bytes). Valid values: Non-negative integers Available since IDG firmware 7.6.0.8 and 7.7.1.2 for transactions of traditional IDG services |
| Obj. Name | Object Name as reported from a log target of a monitored device. Normally contains service Name or front side handler |
| Obj. Type | Object Type as reported from a log target of a monitored device. |
| Operation | Service Operation name - only applies for Web-Service Proxy service type. |
| Out URL | Visible on Extended Transactions only. The URL that the transaction invoked at the back end. |
| Payload | WS-M payload recorded on monitored devices. |
| Service | Only include transactions on the selected service(s). Valid values: Any service name(s) in the system The available values list will change according to the context: |
| Service Type | Multi Protocol or Web Service Proxy (Configuration Only) |
| Severity | Severity as reported from a log target of a monitored device. |
| Status | Only include transactions with the selected status(es). Valid values:
|
| Time | Filter display by time interval. Valid values:
|
| Trans. Direction | Filter display by the transaction’s direction. Valid values:
|
| Trans. ID | Filter display by the id(s) of one or more transactions. Valid values: Transaction ids |
Additional Filters in APIC View
| Filter Name | Functionality |
|---|---|
| Catalog | Filter the displayed transactions by the name of the catalog that was used during the API call. |
| Space | Filter the displayed transactions by the name of the space that was used during the API call. |
| Product | Filter the displayed transactions by the product name that was consumed by the API call. |
| Plan | Filter the displayed transactions by the name of the plan that was used during the API call. |
| API Name | Filter the displayed transactions by the name of the API that was activated. |
| API Version | Filter the displayed transactions by the version of the API that was activated. |
| App Name | Filter the displayed transactions by the name of the consumer application that made the API call. |
| HTTP Method | Filter the displayed transactions by the HTTP method that was used in the API call HTTP request. |
| In URL | Filter the displayed transactions by the URL that was activated by the client. |
| In URI | Filter the displayed transactions by the URI that was activated by the client. |
| FE HTTP Res. Code | (Front-End HTTP Response Code) Filter the displayed transactions by the HTTP response code that the APIC sent back to the client. |
| Client ID | Filter the displayed transactions by the ID of the client that activated the API call. Client IDs are generated by the API Management server during client registration. |
| Client IP | Filter the displayed transactions by the client IP address or load balancer address of the consumer that made the API call. |
| OAuth Scope | Filter the displayed transactions by the scope of the OAuth token that was delivered by the client in the API call. |
| OAuth Resource Owner | Filter the displayed transactions by the resource owner of the OAuth token that was delivered by the client in the API call. |
| OAuth Token Valid From | Filter the displayed transactions by the time that the OAuth token is valid from. |
| OAuth Token Valid Until | Filter the displayed transactions by the time that the OAuth token is valid until. |
| Min Request Latency | Filter the displayed transactions by the minimum time it took to process the request (in ms). |
| Min Response Latency | Filter the displayed transactions by the minimum time it took to process the response (in ms). |
| Min Back-End Latency | (Deprecated) Filter the displayed transactions by the minimum time it took to wait for the backend server to reply (in ms). |
| Min Total Latency | Filter the displayed transactions by the minimum time that the API transaction took till a response was returned to the client (in ms). |
| Min Request Size | Filter the displayed transactions by the minimum size of the request. |
| Min Response Size | Filter the displayed transactions by the minimum size of the response. |
| Error Reason | Filter the display to only show transactions that failed, where the error reason contains the term typed in the input box for this filter. |
| Error Message | Filter the display to only show transactions that failed, where the error message contains the term typed in the input box for this filter. |
| Policy Name | Filter the displayed transactions by the policy name of the element in API diagram/assembly. |
| Gateway Type | Filter the displayed transactions by the gateway type - DataPower Gateway (API Connect v5 and compatibility mode) or DataPower API Gateway (API Connect v6 and up) |