The following table lists the available filters within DPOD.
Most sections of DPOD display only a subset of this list, as applicable to the data displayed in different sections.

Filters in IDG View

Filter Name	Functionality
B2B Message ID B2B From Partner ID B2B To Partner ID B2B From Partner Profile B2B To Partner Profile	Visible in the Raw Message screen only. The B2B Message ID, From Partner ID, To Partner ID, From Partner Profile and To Partner Profile.
Category	Only show messages of the selected category or categories. Valid values: The filter's list is pre-populated with some built-in values. Users may enter their own values as free text
Cause	Visible in the Restarts dashboard only. The restart cause (device initiated, user initiated, etc.)
Catalog Name	API Connect dashboards only.
Client IP	Only show messages and transactions originating on one or more client IPs. The client IP may be either the origin of the message or the load balancer. Valid values: Valid IP Addresses
Corr. Id	Only show information related to one or more correlation ids. This filter only applies to the Deprecated Extended Transactions page. Valid values: Correlation ids of extended transactions.
Device	Only show information related to the selected device(s).
Domain	Only show information related to the selected domain(s).
Error Message	Only show transactions that failed, where the error message contains the term entered into the input box for this filter. Valid values: Free text
Free Text	Enter a value to search in multiple fields at once (depends on the page where the filter exists). Starting to type in the filter will highlight (using a shadow) all other filters that will be searched for the value entered in the Free Text filter. For example, in DataPower Transactions, the Device, Domain, Service, Transaction ID and Client IP information will be searched for the value entered in the Free Text filter. All values are case sensitive, except for the raw messages' message content (which is case insensitive).
Front-Side Handler	Only show services going through the specific Front-side handler(s). Valid values: Front Side Handlers in the system (Configuration Only)
Front URI	The URL the service exposes (Configuration Only)
Global Trans. ID	The Global Tansaction ID
URI	Visible on Extended Transactions and Service URI Calls only. The URI that clients use to invoke transactions.
URL	Visible on Service URL Calls only. The URL that clients use to invoke transactions.
Message
Message Code	Message code as reported from a log target of a monitored device.
Elapsed Time	Filter the displayed transactions by elapsed time (in ms). Valid values: Non-negative integers
Request Size	Filter the displayed transactions by request size (in bytes). Valid values: Non-negative integers Available since IDG firmware 7.6.0.8 and 7.7.1.2 for transactions of traditional IDG services
Response Size	Filter the displayed transactions by response size (in bytes). Valid values: Non-negative integers Available since IDG firmware 7.6.0.8 and 7.7.1.2 for transactions of traditional IDG services
Obj. Name	Object Name as reported from a log target of a monitored device. Normally contains service Name or front side handler
Obj. Type	Object Type as reported from a log target of a monitored device.
Operation	Service Operation name - only applies for Web-Service Proxy service type.
Payload	WS-M payload recorded on monitored devices.
Service	Only include transactions on the selected service(s). Enter either a single service name or multiple names as a comma-separated list. Valid values: Any service name(s) in the system The available values list will change according to the context: In the Investigate section - Raw Messages, Transactions or Extended Transactions pages, the list of values will only show services that actually run on the monitroed devices. In the Explore section - Service Configuration and DevOps services portal, the list of values will show all the services on the monitroed devices, even if they never executed. You may, enter any value into the filter, even if it doesn't appear in the list of available values.
Service Type	Multi Protocol or Web Service Proxy (Configuration Only)
Severity	Severity as reported from a log target of a monitored device.
Status	Only include transactions with the selected status(es). OK ERROR
Time	Filter display by time interval. Valid values: Last 5 minutes Last 10 Minutes Last 15 Minutes Last 30 Minutes Last Hour Last 24 Hours Last 7 Days Last 30 Days Click the left arrow next to the filter to move to the previous interval (for example, previous 15 minutes), or the right arrow to move the the next interval (for example, next 15 minutes). Today (Since midnight) This Week (Since midnight on Monday) This Month (Since midnight on the first day of the month) Yesterday (24 hours ending at midnight of previous day) Last Week (7 days ending at midnight of previous day) Last Month (Midnight 1st of previous month to Midnight 1st of current month) User-defined Interval
Trans. Direction	Filter display by the transaction’s direction. Valid values: Request Response Error
Trans. ID	Filter display by the id(s) of one or more transactions. Valid values: Transaction ids

Additional Filters in APIC View

Filter Name	Functionality
Provider Org Name	Filter the displayed transactions by the provider organization name that was used during the API call.
Catalog	Filter the displayed transactions by the name of the catalog that was used during the API call.
Space	Filter the displayed transactions by the name of the space that was used during the API call.
Product	Filter the displayed transactions by the product name that was consumed by the API call.
Plan	Filter the displayed transactions by the name of the plan that was used during the API call.
API Name	Filter the displayed transactions by the name of the API that was activated.
API Version	Filter the displayed transactions by the version of the API that was activated.
Consumer Org Name	Filter the displayed transactions by the consumer organization name that was used during the API call.
App Name	Filter the displayed transactions by the name of the consumer application that made the API call.
HTTP Method	Filter the displayed transactions by the HTTP method that was used in the API call HTTP request.
URL	Filter the displayed transactions by the URL that was activated by the client.
URI	Filter the displayed transactions by the URI that was activated by the client.
HTTP Res. Code	(Front-End HTTP Response Code) Filter the displayed transactions by the HTTP response code that the APIC sent back to the client.
Client ID	Filter the displayed transactions by the ID of the client that activated the API call. Client IDs are generated by the API Management server during client registration.
Client IP	Filter the displayed transactions by the client IP address or load balancer address of the consumer that made the API call.
OAuth Scope	Filter the displayed transactions by the scope of the OAuth token that was delivered by the client in the API call.
OAuth Resource Owner	Filter the displayed transactions by the resource owner of the OAuth token that was delivered by the client in the API call.
OAuth Token Valid From	Filter the displayed transactions by the time that the OAuth token is valid from.
OAuth Token Valid Until	Filter the displayed transactions by the time that the OAuth token is valid until.
Elapsed Time	Filter the displayed transactions by the elapsed time that the API transaction took till a response was returned to the client (in ms).
Request Size	Filter the displayed transactions by the size of the request (in bytes).
Response Size	Filter the displayed transactions by the size of the response (in bytes).
Error Reason	Filter the display to only show transactions that failed, where the error reason contains the term typed in the input box for this filter.
Error Message	Filter the display to only show transactions that failed, where the error message contains the term typed in the input box for this filter.
Policy Name	Filter the displayed transactions by the policy name of the element in API diagram/assembly.
Gateway Type	Filter the displayed transactions by the gateway type - DataPower Gateway (API Connect v5 and compatibility mode) or DataPower API Gateway (API Connect v6 and up)

Browser not supported