IBM DataPower Operations Dashboard v1.0.20.x
A newer version of this product documentation is available.
You are viewing an older version. View latest at IBM DPOD Documentation.
Service Details
- Copy Page Tree
- Assaf Cohen (Deactivated)
- Sara Weisz
The service details view is displayed when you have filtered the table on the Explore view down to a single service. This view is composed of two widgets:
Service Configuration
This widget contains full configuration details of the service as DPOD views it:
| Heading | Description |
|---|---|
Device | The device this service is deployed on |
Domain | The domain this service is deployed on |
Service | The service name |
FS Handler | The Front-Side Handler for this service |
Service Type | The type of service. (for example, MultiProtocolGateway, XMLFirewallService, etc) |
SOAP Version | SOAP Version for this service (where applicable) |
Admin State (Svc) | The Administrative state of this service (enabled / disabled) |
Admin State (FSH) | The Administrative state of the front-side handler (where applicable). |
F. Protocol / B. Protocol | Front / Back end protocol this service runs on. |
F. Address / B. Address | Front / Back end IP Address for this service. |
F. Port / B. Port | Front / Back end TCP port for this service |
F. URI / B. URI | Front / Back end URI for this service |
F. QMGR / B.QMGR | Front / Back end Queue Manager for this service (when relevant) |
F. QMGR Group / B. QMGR Group | Front / Back end Queue Manager Group for this service (when relevant) |
F. Request Q. / B. Request Q. | Front / Back end Request Queue |
F. Reply Q. / B. Reply Q. | Front / Back end Reply Queue |
| Comments | The "User comments" field (sometimes called "Summary field") of the service |
Change Audit
The Change Audit widget lists all changes made to the service. These may be changes to services, front-side handlers, B2B Gateways and B2B Partners.
DPOD queries the DataPower every 30 minutes for all services' configuration (the interval may be changed from the system parameters page), compares the result with the previous configuration and stores a change audit record when changes are found.
The Change Audit is displayed in a table, where each row describes a single change:
| Column | Description |
|---|---|
Time Sampled | The change’s timestamp sampled by DPOD |
Change Operation | The change operation (for B2B Gateway objects the change operation will also contain the B2B partner's name if applicable). For example - The "Discovered" operation describes when the service/FSH was first discovered by DPOD, and not the time it was originally created |
Description | Description of the change For example - |
| Latency Change | The change in latency (percentage) before and after the configuration change with a time interval of 4 hours, or n/a if there were no executions of the tx. |
| Error Change | The change in errors (percentage) before and after the configuration change with a time interval of 4 hours, or n/a if there were no errors before or after the change. |
Copyright © 2015 MonTier Software (2015) Ltd.