IBM DataPower Operations Dashboard v1.0.16.0

A newer version of this product documentation is available.

You are viewing an older version. View latest at IBM DPOD Documentation.

Upgrade to 1.0.11.0 - Special Steps

Owned by Amit Munwes
Last updated: Aug 30, 2020
1 min read

Issue in Upgrading Cell Environment from 1.0.10.X to 1.0.11.0

DPOD 1.0.11.0 has an issue that causes upgrades to fail for a cell environment. Follow the instructions below to avoid this issue.


Before running the upgrade, execute the following commands on BOTH the cell manager and all the cell members:

mkdir -p /app/agentnode/MonTier-AgentNode/conf && touch /app/agentnode/MonTier-AgentNode/conf/MonTierAgentNode.conf

Appliance Mode Users Only - Upgrade should be Applied in 2 Steps

The upgrade will update your DPOD installation Operating System (CentOS 7.8). Therefore the upgrade command will be required to be executed twice:

  1. For operating system update
  2. For application software upgrade


IBM DataPower Operations Dashboard (DPOD) v1.0.16.0