IBM DataPower Operations Dashboard v1.0.13.0
A newer version of this product documentation is available.
You are viewing an older version. View latest at IBM DPOD Documentation.
Service Configuration Changes
- Sara Weisz
- Assaf Cohen (Deactivated)
The Service Configuration Changes tab in the Explore view lists all changes made to the services ordered by time descending.
These may be changes to the gateway's services, front-side handlers, B2B Gateways and B2B Partners.
DPOD queries the gateway every 30 minutes for all services' configuration (the interval may be changed from the system parameters page), compares the result with the previous configuration and stores a change audit record when changes are found.
The Change Audit is displayed in a table, where each row describes a single change:
| Column | Description |
|---|---|
Device | The device the service is configured on. |
Domain | The domain the service is configured on. |
Service Name | The name of the service. |
| Time Sampled | The change’s timestamp sampled by DPOD |
| Change Operation | The change operation (for B2B Gateway objects the change operation will also contain the B2B partner's name if applicable). For example - The "Discovered" operation describes when the service/FSH was first discovered by DPOD, and not the time it was originally created |
| Description | Description of the change For example - |
| Latency Change | The change in latency (percentage) before and after the configuration change. The time interval before and after can be set by the Latency/Error filter (4 hours, 1 day, 1 week). |
| Error Change | The change in errors (percentage) before and after the configuration change. The time interval before and after can be set by the Latency/Error filter (4 hours, 1 day, 1 week). n/a will be displayed if there were no errors before or after the change. |