IBM DataPower Operations Dashboard v1.0.12.0
A newer version of this product documentation is available.
You are viewing an older version. View latest at IBM DPOD Documentation.
Configurable Parameters and Settings
- Assaf Cohen (Deactivated)
- Sara Weisz
Owned by Assaf Cohen (Deactivated)
This page lists system parameters that are of interest in the appliance maintenance context. The parameters can be configured using the system parameters page.
| Parameter | Description | Default Value |
|---|---|---|
| Enable Backups | Global flag to enable or disable all backups. No backups will run when this flag is set to false | true |
| Enable Syncs | Global flag to enable or disable all configuration syncs. No syncs will run when this flag is set to false | true |
| Enable Firmware Upgrades | Global flag to enable or disable all firmware upgrades. No upgrades will run when this flag is set to false | true |
| Enable Secure Restores | Global flag to enable or disable all secure restores. No restores will run when this flag is set to false As of DPOD v1.0.9, Secure-Restores are only available via the Appliance Migration feature and not as a stand-alone feature, Disabling this option will disable Appliance Migrations from restoring the target gateway | true |
| Maintenance User Scripts Source Path | Location of the user Plan/Task Pre/Post scripts in the file system | /app/custom/scripts |
| Maintenance User Scripts Working Path | The user scripts' execution path. This is normally the same as the source path above | /app/custom/scripts |
| Maintenance Window Start Time (HH:MM) | Global value for the maintenance window start time. This value may be overridden in a specific plan's settings | 22:00 |
| Maintenance Window End Time (HH:MM) | Global value for the maintenance window end time. This value may be overridden in a specific plan's settings | 06:00 |
| Maintenance Syslog Notifications Destination Hostname | The hostname or IP address where syslog records are sent to | No Default |
| Maintenance Syslog Notifications Destination Port | The port where syslog records are sent to | 60000 |
| Maintenance Error Syslog Severity Field Value | The severity of error operations syslog records (such as "Plan Failed") | error |
| Maintenance Success Syslog Severity Field Value | The severity of success syslog records (Such as "Plan Finished Successfully") | info |
| Maintenance - Timeout in Seconds for Quiesce Operations | The timeout (in seconds) sent to the Quiesce operation when a quiesce operation was requested in the activity. DPOD will add 3 minutes to this timeout and check if all domains quiesced within this period. | 1800 |
| Maintenance - Timeout in Seconds for Unquiesce Operations | The timeout (in seconds) for DPOD to wait until all domains unquiesce before marking the task as failed DPOD will add 3 minutes to this timeout | 1800 |
| Maintenance - Timeout in Seconds for Restart Operations | The timeout (in seconds) for DPOD to wait for a device to restart before marking the task as failed | 1800 |
| Backups - Destination Path | Destination path where DPOD saves its backup files. | /data/backups/store |
| Backups - Backup Store Free Space Threshold (Percent) | Before starting any backup, DPOD ensures that the destination path has enough free storage available. When the percentage of free storage is less than this value, the backup will not proceed | 10 |
| Backups - DataPower Temp Free Space Threshold (Percent) | For Secure Backup - the backup will be first stored in the DataPower temp filesystem, Before starting a secure backup, DPOD ensures that the temp DataPower filesystem has enough free storage available. When the percentage of free storage is less than this value, the backup will not proceed | 10 |
| Maintenance - Max Minutes Before Marking Task as Canceled | The amount of time (in minutes) DPOD waits before marking a hung task as cancelled. This time is relative to the last status change on the task. When DPOD marks such tasks as cancelled, other tasks may start executing on the device. (The task itself will not be interrupted) | 60 |
| Syncs - Temp Files Path | Location where DPOD saves temporary exports and files used by the configuration sync tasks | /app/tmp/sync |
| Firmware Upgrade - Repository Path | Where DPOD should look for the firmware upgrade image files. It is recommended that you set up a mount point and point the parameter to it. Using the following DPOD paths and subfolders of those paths is not supported: /app /data /logs /installs /var | /tmp |
| Firmware Upgrade - Local Node IP Address | The network address of DPOD that monitored device can access using SSH | No Default |
| Firmware Upgrade - OS User Name | DPOD OS user name for SCP access | productuser1 |
| Firmware Upgrade - OS User Password | DPOD OS user password for SCP access | ******* |
| Secure Restore - Seconds to Wait After Restart | When using Secure-Restore, how long to wait after detecting that the gateway is up and running, and before starting post-processing tasks (this time is required for the gateway to process its configuration) As of DPOD v1.0.9, Secure-Restores are only available via the Appliance Migration feature and not as a stand-alone feature. | 150 |
| The HTTP Address of the UI | The URL prefix for your DPOD UI - for example: https://10.0.0.50 (everything before /op) it will be used in the maintenance result emails | No Default |
| Backups - Max Minutes before Releasing Locks on Running Tasks | Maximum time to wait for maintenance task to finish before marking it as cancelled Even when marked as cancelled the maintenance operation may still be executing on the Gateway. | 60 |