IBM DataPower Operations Dashboard v1.0.14.0

A newer version of this product documentation is available.

You are viewing an older version. View latest at IBM DPOD Documentation.

Prepare Pre-Installed Operating System

Non-Appliance Mode Only

The steps below are only applicable for installation in Non-Appliance mode, and should be performed by your Linux administrator.

 

This video demonstrates how to prepare a RHEL 7.8 operating system for DPOD Non-Appliance mode installation. Use it just as a demonstration, as it is not kept up-to-date with every change in the requirements. When preparing the operating system, you should follow the procedure provided below.

 

Subject

Action

Subject

Action

Supported operating system

Verify that the operating system is supported by DPOD as described in Hardware and Software Requirements. After the server OS is installed, this can be verified using the following command:

cat /etc/redhat-release

Resources allocation

Allocate resources according to the chosen architecture type as listed in Hardware and Software Requirements. After the server OS is installed, this can be verified using the following commands:

free -h lscpu

Network requirements

Ensure you have at least one network interface installed and configured with full access to network services, such as DNS and NTP.
Some configurations, such as the Cell environment, require 2 network interfaces. See Network Preparation and Firewall Requirements for more details.

Root access

The installation must be performed by a root user. You cannot use sudo instead.
Do not override the PATH variable with a fixed value during login sequence, as this will override the value set by DPOD installation in .bash_profile and will cause various scripts to fail.
Do not use script command during the login sequence to make typescript of the terminal session for audit, as this will cause various scripts to hang.
Do not use trap command to clear the terminal on session close, as this will cause various scripts to get extra characters as their input and fail.
Do not print a disclaimer in .bashrc, as this will cause various scripts to get the disclaimer as their input and fail.

Disks, mount points, file systems and logical volumes

DPOD requires at least 3 disks (LUNs / physical / virtual) for the operating system, for the application and for the data. Some configurations, such as the Cell environment, require additional disks.
Please allocate the mount points / file systems on the different disks, as described in Table 1 below. It is strongly recommended to use logical volume manager (LVM) - particularly for the data disks.
Once configured, you may verify the configuration using the following command:

lsblk

Tip: to create the mount points / file systems during RHEL installation:

  • Choose Installation Destination option.

  • Select all Local Standard drives and choose option "I will configure partitioning" under the "Other Storage Options" section.

  • Follow the table below and add all mount points with required definitions using the "+" button.

  • To create a volume group (sys, app, data), when applicable, open the "Volume Group" listbox and choose "create new volume group ...".

Store service dedicated OS user and group

The Store service requires a dedicated OS user and group to run. Consider executing the following command:

OS locale

The supported OS locale is en_US.UTF-8. Check the OS Locale Configuration and change it if necessary.

SELinux configuration

Changes in SELinux configuration might be needed. If SELinux is enforced on the DPOD server, please review possible required configuration changes.

Setup DNS

Setup DNS - your network admin may need to assist you with this action.

Using yum on RedHat

For RedHat only: Your system might need to be registered and subscribed to the Red Hat Customer Portal to be able to install all prerequisites using yum.
Registration and subscription may differ between organizations and RHEL version, so use the following commands just as a demonstration:

Setup NTP

Setup NTP - it has to be the same one configured in your IBM DataPower Gateways.

  • Consult your Linux and network admin about the proper way to configure this service.

  • For RHEL 7.x, ensure the NTP RPM is installed. Consider executing the following commands:

  • For RHEL 8.x, ensure the Chrony RPM is installed. Consider executing the following commands:

Setup hosts file

erify that the /etc/hosts file includes an entry with your server name mapped to your external server IP.
To find your server name, you may execute the command hostname.

Required RPMs

Verify the existence of the following RPMs from the official RedHat/CentOS yum repositories:

  • httpd version 2.4.6-67 and above (together with the following dependencies: mailcap, apr, httpd_tools)

  • mod_ssl

  • mod_proxy_html

  • curl

  • wget

  • unzip

  • iptables

  • iptables-services

  • bc

  • fontconfig

  • squashfs-tools (make sure squashfs module is loaded - see more at https://access.redhat.com/solutions/5477831)

  • numactl

  • pciutils

  • nvme-cli

The installation is usually performed by executing yum. If the command fails to find the packages, you should manually download the RPM files and install them.

The following RPMs are recommended for system maintenance and troubleshooting, but are optional: telnet client, net-tools, iftop, tcpdump



Ensure the httpd service is enabled and started by executing the command:



Optional: Install Kibana OSS (please read Kibana access limitations):

Cleanup

In case you are using yum, it is recommended to clean its cache to make sure there is enough space in /var (yum cache can take a lot of the space there). To clean yum cache, execute the command:


Table 1 - File Systems / Mount Points

File System / Mount Point

Disk

Space in Mib

Device Type

File System

File System / Mount Point

Disk

Space in Mib

Device Type

File System

biosboot

sys (sda)

2

Standard Partition

BIOS BOOT

swap

sys (sda)

8192

LVM

swap

/boot

sys (sda)

2048

Standard Partition

XFS

/boot/efi

sys (sda)

200
(for UEFI installations for GPT partition)

Standard Partition

EFI System Partition

/

sys (sda)

8192

LVM

XFS

/var

sys (sda)

8192

LVM

XFS

/tmp

sys (sda)

4096
(recommended 16384)

LVM

XFS

/shared

app (sdb)

512

LVM

XFS

/app

app (sdb)

8192

LVM

XFS

/app/tmp

app (sdb)

4096

LVM

XFS

/installs

app (sdb)

11264

LVM

XFS

/logs

app (sdb)

12,288
(can be on other fast disk - preferred locally)

LVM

XFS

/data

data (sdc)

As described in Hardware and Software Requirements or according to the sizing spreadsheet in case one was provided by DPOD support team. Minimum of 100GB.

LVM

XFS

Third-Party Software

Third-party software such as antivirus, cybersecurity, monitoring, APM, endpoint protection, backup, etc. might significantly decrease the performance of DPOD and impact its functionality.

In case of functionality or performance issues, try first to disable such software.

During the resolution of issues, DPOD support will ask the customer to disable any 3rd party software in order to isolate the issues and verify their source. Support cannot be provided if the 3rd party tools are not disabled.









IBM DataPower Operations Dashboard (DPOD) v1.0.14.0