DPOD can be configure with two network interface :

1. First Interface - For accessing DPOD's Web Console via web browser and DPOD's CLI via SSH.
2. Second Interface - For communicating with the monitored devices.

Connect the Second Network Interface to the Server

Use your system administrator assistance to add a second network interface to your virtual machine or physical server.

In some cases there will be a need to restart the server before the new network will be available.

After the server restart,  the operating system will automatically configure the new network interface  using DHCP.

Log in to DPOD's Console or CLI via SSH with the user "root"  and type the command "ifconfig"

The new network interface should be displayed as "eth1"

Configure the New Network Interface

1. Copy the network interface MAC address as displayed in the "ifconfig"  command output after the attribute "ether"
   
   

2. change directory to /etc/sysconfig/network-scripts
   
   

   cd /etc/sysconfig/network-scripts

3. duplicate the eth0 (first network interface) network interface configuration file for the new network interface file (eth1)
   
   

    cp ifcfg-eth0 ifcfg-eth1 

4. Edit the new file (ifcdf-eth1) and alter the following attributes based on the new network interface properties
   
   

   DEVICE=eth1
   BOOTPROTO=static
   ONBOOT=yes
   NM_CONTROLLED=no
   HWADDR=00:0c:29:14:7a:88
   IPADDR=192.168.116.178
   NETMASK=255.255.255.0
   USERCTL=no
   DNS1=8.8.8.8
   DNS2=8.8.4.4
   IFCONFIG_OPTS="txqueuelen 10000"

   
   DEVICE     : The network interface device name should be eth1
   HWADDR  : The network interface MAC address as displayed at section 1.
   NETMASK : The network mask based on the new interface properties (the network administrator should supply this information)
   
   

5. Restart the network service by entering the following command

   service network restart
   The command output should be : Restarting network (via systemctl):                        [  OK  ]

6. df
7. sdf