...

...

DPOD's Big Data Store is located on a dedicated mount point. Occasionally, the disk space allocated for the Store needs to be increased. Reasons for that include an increase in TPS, or a requirement to retain history for longer periods of time. Follow the steps below to increase the Store space.

It is possible to extend Note: You may choose between extending the existing data disk (option 1), or add an adding additional one disks (option 2). Choose the option below that is suitable for your environment.

Option 1: Extending the Existing Data Disk

Note: fdisk utility supports disks up to 2TB each. To increase the Store space above 2TB, add
Since DPOD uses fdisk utility for creating partitions in the data disk during installation, it only supports extending the existing data disk (option 1) up to 2TB. However, additional disks (option 2) instead of extending a single data disk.can be larger than 2TB.

Option 1: Extending the Existing Data Disk

Extending the Disk in a Physical Server

...

1. Verify the current size of mount point /data:

   Code Block
   language bash theme RDark
   df -h /data

   The system output should resemble the following:
   
   
   

2. Verify the new disk size:

   Code Block
   language bash theme RDark
   fdisk -l | grep /dev/sdc

   The system output should resemble the following:

   
   
   

3. Use fdisk to create a new partition for the new size:

   Code Block
   language bash theme RDark
   fdisk /dev/sdc

   
   

   1. Press p to print the partition table to identify the number of partitions:
      
      If this is the first time the disk is extended, you should only see sdc1. If this is a subsequent extension - you will see additional sdcX listed (e.g. sdc2 for the second extension).
   2. Press n to create a new primary partition.
   3. Press p for primary.
   4. When the system prompts for a partition number, enter the next number depending on the output of the partition table print.
      If this is the first extension and you see only one row of output - enter 2. If this is the second disk extension then the partition number will be 3, and so on.
   5. Press Enter twice
      
   6. Press t to change the system's partition ID.
   7. Press 2 to select the newly created partition (Remember: if this is a subsequent disk extension - the number will be 3 or higher).
   8. Type 8e to change the Hex Code of the partition for Linux LVM.

   9. Press w to write the changes to the partition table.
      
      
      
      

      Note
      The following warning is valid, the system reboot will fix the issue: “WARNING: Re-reading the partition table failed with error 16: Device or resource busy. The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8)”

      
      

4. Reboot the system:
   

   Code Block
   language bash theme RDark
   reboot

   
   

5. When the system is available again, ensure the new partition is available:

   Code Block
   language bash theme RDark
   fdisk -l | grep /dev/sdc

   The system output should resemble the following (note the new sdcX added):
   
   
   

6. Stop the application by running app-util.sh and selecting option 2 (stop all).
   
   

7. Create a new LVM Physical Volume (PV)Configure the new partition:

   Note
   If the new partition is not sdc2, substitute sdc2 for the right qualifier in all the following commands

   
   

   Code Block
   language bash theme RDark
   pvcreate /dev/sdc2

   Extend the LVM Volume Group (VG):

   Code Block
   language bash theme RDark
   vgextend vg_data /dev/sdc2

   Extend the LVM Logical Volume (LV):

   Code Block
   language bash theme RDark
   lvextend -l +100%FREE /dev/vg_data/lv_data

   
   

8. Identify the /data file system type (for CentOS 7.2+ based appliances the type is xfs):

   Code Block
   language bash theme RDark
   cat /etc/fstab | grep /data

   The system output should resemble the following:
   
   
   

9. Resize the file system. Select the correct command below for your file system type:

   Code Block
   language bash theme RDark title For ext4
   resize2fs /dev/vg_data/lv_data

   
   

   Code Block
   language bash theme RDark title For xfs
   xfs_growfs /dev/vg_data/lv_data

   
   

   The system output should resemble the following:
   
   
   

10. Display the new size of the /data mount point:

    Code Block
    language bash theme RDark
    df -h /data

    
    

11. Update the Store configuration file

    (see below

    :

    Code Block
    language bash theme RDark
    /app/scripts/update_store_allocation.sh -l 4

    
    

12. Start all services using app-util.sh and selecting option 1 (start all).

Option 2: Adding an Additional Data Disk

...

1. Verify the current size of the /data mount point:

   Code Block
   language bash theme RDark
   df -h /data

   The system output should resemble the following:
   

2. Verify Identify the new disk size:

   Code Block
   language bash theme RDark
   fdisklsblk -l[ |Note: grep /dev/sdd

   The system output should resemble the following:
   Image Removed

   Use fdisk to create a new partition for the new size:

   Code Block
   language bash theme RDark
   fdisk /dev/sdd

3. Press p to print the partition table and ensure there are no existing partitions. 
   Image Removed
4. Press n to create a new primary partition.
5. Press p for primary.
6. Press 1 for the partition number
7. Press Enter twice
   Image Removed
8. Press t to change the system's partition ID.
9. Type 8e to change the Hex Code of the partition for Linux LVM.
Press w to write the changes to the partition table.
Image Removed


Reboot the system:

Code Block
language bash theme RDark
reboot

10. When the system is available again, ensure the new partition is created:

    Code Block
    language bash theme RDark
    fdisk -l | grep /dev/sdd

     The system output should resemble  the following:
    Image Removed

11. Example output below is filtered to show only sdd disk information, but should include many more entries of sda, sdb and sdc disks ] NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT sdd 8:32 0 200G 0 disk

    
    

12. Stop the application by running app-util.sh and selecting option 2 (stop all)
    Create a new LVM Physical Volume (PV):
    

13. Execute the following commands. Replace the name of data disk if it is different in your environment.

    Code Block
    language bash theme RDark
    pvcreate -ff /dev/sdd1

    Extend the LVM Volume Group (VG):

    Code Block
    language bash theme RDark
    sdd vgextend vg_data /dev/sdd1

    Extend the LVM logical volume (LV):

    Code Block
    language bash theme RDark
    sdd lvextend -l +100%FREE /dev/vg_data/lv_data

    
    

14. Identify the /data file system type (for CentOS 7.2+ based appliances the type is xfs): 

    Code Block
    language bash theme RDark
    cat /etc/fstab | grep /data

     The system output should resemble the following:
    
    
    

    
    

15. Resize the file system. Select the correct command below for your file system type:

    Code Block
    language bash theme RDark title For ext4
    resize2fs /dev/vg_data/lv_data

    
    

    Code Block
    language bash theme RDark title For xfs
    xfs_growfs /dev/vg_data/lv_data

    
    The system output should resemble the following:
    
    
    

16. Display the new size of the /data mount point:

    Code Block
    language bash theme RDark
    df -h /data

    The system output should resemble the following:
    
    
    

Execute the following script to update

17. Update

    the Store configuration file (see below).

Update the Store Configuration File

1. the Store configuration file

with the new file system size

2. :

   Code Block
   language bash theme RDark
   /app/scripts/update_store_allocation.sh -l

1

3. 4

   
   

4. Start
the application by running
5. all services using app-util.sh and selecting option 1 (start all).