IBM DataPower Operations Dashboard v1.0.13.0

A newer version of this product documentation is available.

You are viewing an older version. View latest at IBM DPOD Documentation.

Using the Command Line Interface (CLI)

The Command Line Interface (CLI) allows DPOD administrators to view the status of system services and their vitality alongside system logs and performance metrics.

To start the CLI consult the Run the Main Admin Menu CLI page.

CLI Main Admin Menu Operations

The following operations are available via the CLI menu:

Operation

Purpose

Start All System Services

Start all DPOD system services

Stop All

Stop all DPOD system services

Check Status

View DPOD system services status (running/stopped)

Start Service

Start DPOD system services.
The command lets you start either single service or a list of several services.

Stop Service

Stop DPOD system services.
The command lets you stop either a single service or a list of several services.

MustGather

Create and export DPOD MustGather logs.
(This operation may be requested of you by product support)

In order to run the command see following link

Reboot Device

Restart the DPOD device (physical or VM)

Shutdown Device

Shutdown the DPOD device (physical or VM)

Upgrade/Update

Upgrade the DPOD installation to a newer version.
This requires an update file (Fix file) to be uploaded to the system

Exit

Exit the CLI

IBM DataPower Operations Dashboard (DPOD) v1.0.13.0