Page Comparison

...

After installing DPOD on the External Self-Service Console machine, follow the steps below:

1. Stop DPOD components 

2. Ensure all components are down

3. Disable some DPOD services:

   1. Edit (using vi) the file /etc/sysconfig/MonTier ,change the following line:

      Code Block
      SERVICES_FIRST_GROUP="MonTier-AppAdmin MonTier-Derby MonTier-es-raw-trans-Node-1"

      and remove all components except for MonTier-Derby:

      Code Block
      SERVICES_FIRST_GROUP="MonTier-AppAdmin MonTier-Derby"

      
      

   2. Comment out the following lines:

      Code Block
      SERVICES_SECOND_GROUP="MonTier-es-raw-trans-Node ..." SERVICES_FORTH_GROUP="MonTier-AggAgent- ..." SERVICES_FIFTH_GROUP="MonTier-BalancerAgent ..." SERVICES_SIXTH_GROUP="MonTier-WsmAgent-1 ..."

      
      

4. Change DPOD's Store entries in /etc/hosts to direct to DPOD Internal Console IP address (1.1.1.1 in the example below):

   Code Block
   1.1.1.1 montier-es 1.1.1.1 montier-es-http

   
   

5. Start configuration database service

   Code Block
   start_services.sh -o derby ij

   
   

6. Update the SystemParameter SQL table:

   Code Block

   UPDATE SystemParameter SET value='false' WHERE name='agents.management.enabled'; UPDATE SystemParameter SET value='false' WHERE name = 'system.internal_self_service.is_internal'; UPDATE SystemParameter SET value='false' WHERE name = 'system.should_run_retention_on_startup'; update HATSRECURRINGTASK set isEnabled='false' where taskType not in ('DATABASE_CLEANUP', 'FILE_CLEANUP', 'INTERNAL_ALERTS_CHECK_DERBY', 'INTERNAL_ALERTS_CHECK_FS_FREESPACE');

   
   

7. If you wish to let the external self service users access the DevOps Services Portal, change the following system parameters in the external self service console
   (you can do that from Manage → Customize → System Parameters after the web console starts):
   1. Internal Self Service Address: Enter the address of the internal self service portal.
   2. Internal Self Service Webserver Port: (defaults to 443) The webserver port for the internal self service portal - change this value only if advised.
8. Update external server's encryption key:
   

   1. Copy the encryption key from internal server to the external server's temp folder - do not override servers encryption file:

      Code Block
      scp root@<internal server ip>:/app/keys/encryption.key /tmp/encryption.key

      
      

   2. Deploy the key using utility:

      Code Block
      /app/scripts/replace_encryption_key.sh --deploy /tmp/encryption.key

      
      

...

Connect to the DPOD Internal Console server and alter the configuration to let it accept communication from the DPOD External Self-Service Console.

1. Stop DPOD components

2. Ensure all Ensure all components are down :

3. Change DPOD Store entries in /etc/hosts to bind to DPOD Internal Console IP address instead of 127.0.0.1 (1.1.1.1 in the example below):

   Code Block
   1.1.1.1 montier-es 1.1.1.1 montier-es-http

   
   

4. Start DPOD components

5. Ensure all components are up and running

   Code Block

   app_status.sh #Output Example: MonTier-AppAdmin (pid 17836) is running... MonTier-Derby (pid 17940) is running... MonTier-es-raw-trans-Node-1 (pid 18125) is running... MonTier-es-raw-trans-Node-2 (pid 21122) is running... MonTier-es-raw-trans-Node-3 (pid 21103) is running... MonTier-es-raw-trans-Node-4 (pid 21120) is running... MonTier-SyslogAgent-1 (pid 27350) is running... MonTier-SyslogAgent-2 (pid 27286) is running... MonTier-SyslogAgent-3 (pid 27177) is running... MonTier-SyslogAgent-4 (pid 27075) is running... MonTier-WsmAgent-1 (pid 27002) is running... MonTier-WsmAgent-2 (pid 26921) is running... MonTier-WsmAgent-3 (pid 26881) is running... MonTier-WsmAgent-4 (pid 26773) is running... MonTier-HK-ESRetention (pid 24012) is running... MonTier-HK-WdpDeviceResources (pid 27590) is running... MonTier-HK-WdpServiceResources (pid 27447) is running... MonTier-HK-SyslogKeepalive (pid 1976) is running... MonTier-HK-WsmKeepalive (pid 1932) is running... MonTier-UI (pid 1635) is running... MonTier-Reports (pid 1830) is running... MonTier-AgentNode (pid 1736) is running...