IBM DataPower Operations Dashboard contains an extensive set of parameters that let administrators fine-tune the system's behavior to the installation requirements.
The following sections describe these parameters in detail.
The parameters are accessible through the System Parameters page: [Manage → Customize → System Parameters].
Appliance Maintenance
The Appliance Maintenance (Backup, Sync and Firmware upgrade) system parameters are listed on a separate page
APM
| Parameter | Category | Default Value | Description |
|---|---|---|---|
| APM Integration Syslog App Name | APM Integration | DPOD-MSC1 | Logical name used by APM to indentify DPOD. |
| APM Integration Target Syslog Host | APM Integration | 172.77.77.7 | APM's IP address or hostname |
| APM Integration Target Syslog Port | APM Integration | 60030 | APM's listening port |
| APM Integration Target Syslog Protocol | APM Integration | tcp | APM's listening protocol for Syslog |
| APM Integration Target Syslog SSL | APM Integration | false | Is conncetion secured? |
| APM Integration Events Publishing Enable | APM Integration | true | Activate / Disable integration between DPOD and APM installation. |
Alerts
| Parameter | Category | Default Value | Description |
|---|---|---|---|
| Enable Queries Emails SMTP | Alerts | true | Enable / Disable publishing alerts via SMTP server |
| Enable Queries Emails SMTP WS | Alerts | false | Enable / Disable publishing alerts via Web Service |
| Fields to Ignore in ElasticSearch Response in Alerts | Alerts | doc_count_error_upper_bound,sum_other_doc_count | Field to omit from alert description |
| Enable Queries Output File | Alerts | false | Enable / Disable publishing alerts as file in local file system |
| Syslog Severity Field Value | Alerts | info | Syslog record message level. Possible values: debug, info, notice, warning, err, crit, alert, emerg |
| Alerts Syslog Server Hostname | Alerts | Syslog server hostname or IP address. | |
| Alerts Syslog Server Port | Alerts | Syslog server listening port. |
Dashboards
Parameter | Category | Default Value | Description |
|---|---|---|---|
| IDG Transactions Page Columns | Dashboards | Service Name, Operation, Time, Device, Domain, Status, Transaction ID, Client IP, Global Transaction ID, Elapsed, Payload | Controls which columns will appear in the Investigate->Transactions Page, you can omit or reorder the columns. Any mistakes in the input will cause the display to revert to the default value. The Payload field will not appear to users that does not have authorization to view payloads Possible values (not case sensitive): Service Name, Operation, Time, Device, Domain, Status, Transaction ID, Client IP, Global Transaction ID, Elapsed, Payload |
| IDG Raw Message Page Columns | Dashboards | Device, Domain, Category, Severity, Time, Direction, Object Type, Object Name, Transaction ID, Client IP, Message Code, Message | Controls which columns will appear in the Investigate→Raw Messages Page, you can omit or reorder the columns. Possible values (not case sensitive): |
| APIC Transactions Page Columns | Dashboards | Time, Device, Catalog Name, Space Name, Product, Plan Name, API Name, API Version, APP Name, Method, URI, Status, Transaction ID, Client IP, Elapsed, Payload | Controls which columns will appear in the APIC Investigate->Transactions Page, you can omit or reorder the columns. Possible values (not case sensitive): |
Service URI Dashboard Percentiles (3 comma separated decimals) | Dashboards | 90.0, 95.0, 99.0 | Controls the percentiles shown in the rightmost columns of the Service URI Calls page and the API URI calls page, enter decimal values between 0-99.9 |
Service URL Dashboard Percentiles (3 comma separated decimals) | Dashboards | 90.0, 95.0, 99.0 | Controls the percentiles shown in the rightmost columns of the Service URL Calls page and the API URL calls page, enter decimal values between 0-99.9 |
| APIC Recent Activity Page Latency Percentile | Dashboards | 90.0 | Controls the percentile shown in the APIC Recent Activity page, enter a decimal value between 0-99.9 |
Device Health
| Parameter | Category | Default Value | Description |
|---|---|---|---|
| System Health Dashboard Sample Time Range (min.) | Device Health | 5 | See "Device Health Calculation" in System Health |
Reports
The following parameters determine DPOD's reporting behavior.
Parameter | Category | Default Value | Description |
|---|---|---|---|
Enable Reports Emails SMTP | Reports | true | Enables sending reports via SMTP |
Enable Reports Emails SMTP WS | Reports | false | Enables sending reports via a Web-Service |
Enable Reports Output File | Reports | false | Enables writing reports to a local file-system. (Defaults to /data/reports) |
Fields to ignore in ElasticSearch response | Reports | doc_count_error_upper_bound,sum_other_doc_count | For internal use, do not change unless instructed to do so by product support.
|
For more information see reports or configuring sending reports in mail.
Emails and SMTP (For report publishing, alerts, share, maintenanace plans etc)
When sending notifications via SMTP or SMTP WS. the following parameters determine how those notifications are sent.
When SMTP or SMTP-WS is selected as the reporting behavior, all parameters relating this behavior must be provided.
Parameter | Category | Default Value | Description |
|---|---|---|---|
From Address | from@example.com | The from address used for the report email. | |
SMTP Host | Email SMTP | smtp.example.com | Destination SMTP host |
SMTP Password | Email SMTP | ******** | Password for logging in to the SMTP host. If no authentication required leave this field empty. |
SMTP Port | Email SMTP | 465 | Destination SMTP host port |
SMTP User | Email SMTP | mailer@example.com | Username for logging in to the SMTP host. If no authentication required leave this field empty. |
| SMTP SSL Enabled | Email SMTP | true | Enable / Disable TLS/SSL |
SMTP WS Endpoint URI | Email SMTP WS | /SMTPSender | Destination URI for sending reports via Web-Service |
SMTP WS Host | Email SMTP WS | localhost | Destination hostname for sending reports via Web-Service |
SMTP WS Port | Email SMTP WS | 8080 | Destination port for sending reports via Web-Service |
SMTP WS Protocol | Email SMTP WS | HTTP | Protocol for accessing the Web-Service host Valid values: HTTP / HTTPS |
SMTP WS User | Email SMTP WS | user | User used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication. |
SMTP WS Password | Email SMTP WS | ******** | Password used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication. |
See reports for more information
LDAP
The following parameters control configuration and connection to an LDAP registry, used for role-based security.
The LDAP parameters should not be altered manually and should exactly match the values in the services configuration files.
Instead, use the LDAP Configuration Script which tests the parameters, encrypts the passwords and changes the configuration files in addition to System Parameters.
Parameter | Category | Default Value | Description |
|---|---|---|---|
| Enable LDAP | LDAP | false | See LDAP Configuration Script |
| LDAP Connection URLs | LDAP | See LDAP Configuration Script | |
| Enable LDAP Host Name Verification | LDAP | true | See LDAP Configuration Script |
LDAP Connection Name (DN) | LDAP | ||
LDAP Connection Password | LDAP | ||
LDAP Referral (ignore/follow) | LDAP | ignore | See LDAP Configuration Script |
| LDAP User Search Base | LDAP | See LDAP Configuration Script | |
| LDAP User Search Filter | LDAP | See LDAP Configuration Script | |
LDAP User Name Attribute Name | LDAP | ||
| LDAP Group Search Base | LDAP | See LDAP Configuration Script | |
| LDAP Group Membership Search Filter | LDAP | See LDAP Configuration Script | |
LDAP Group Membership Search Nested | LDAP | true | |
| LDAP Group Name Search Filter | LDAP | ||
LDAP Group Name Attribute Name | LDAP | cn |
Monitored Devices Authentication
The following parameters control authentication of monitored DataPower Gateways.
When DPOD collects data from monitored devices, it verifies that these are the correct devices using TLS; The DataPower certificate is authenticated against DPOD’s CA trust store, specified below.
Parameter | Category | Default Value | Description |
|---|---|---|---|
| Local User Registry Enabled | Security | false (for new installations v1.0.7+) true (when upgrading from v1.0.6) | When disabled, DPOD will not store any new user details in local repository to comply with Security complaince requirements (DPOD will not automatically delete any existing user details after changing the value of this parameter) |
TLS Level (TLSv1/TLSv1.1/TLSv1.2) | Security | TLSv1.2 | TLS level used to perform authentication |
CA Trusted Keystore Password | Security | Trust store password | |
CA Trusted Keystore Full Path and Filename | Security | /app/java/jre/lib/security/cacerts | Trust store full path |
CA Trusted Keystore Type (JKS/PKCS12) | Security | JKS | Trust store type |
TLS configuration information can be found in LDAP Configuration Script.
Configuration Changes Tracking
DPOD collects data about DataPower configuration changes from its monitored devices. It does this by pulling the complete configuration from the device, and comparing it to the last collected configuration. The parameters below control this mechanism.
Parameter | Category | Default Value | Description |
|---|---|---|---|
Interval time to extract all service configuration and compare to last version; In Seconds; | ServiceConfig | 1800 | Determines how often monitored devices configuration is collected and compared to the last version. Recommended nterval is at least 900 (15 minutes). |
Interval number to compress Configuration Table since massive update and delete occurs. Once a day | ServiceConfig | 50 | For internal use, do not change unless instructed to do so by product support. |
Consult the table on System Services Management for more information about the types of agents in DPOD and the information they collect.
Console UI Appearance
These parameters control the way data is displayed in DPOD's Console UI.
Parameter | Category | Default | Description |
Default Full Date Format | Style | MM/dd/yyyy HH:mm:ss.SSS | Full date format |
Default Date Format with no Millis | Style | MM/dd/yyyy HH:mm:ss | Full date format, without milliseconds |
Default Date Format with no Year | Style | MM/dd HH:mm:ss.SSS | Full date format, without year |
Default Short Date Format | Style | MM/dd/yyyy | Short date format |
Default Theme (light/dark/elegant) | Style | Light | Light, dark or elegant theme of the console UI screens |
Internal Health
| Parameter | Category | Default | Description |
|---|---|---|---|
| Internal Alerts - Check Agents Interval in Seconds | Health | 300 | How often to check whether DPOD's syslog and WS-M agents are up and working |
| Internal Alerts - Check Derby Interval in Seconds | Health | 300 | How often to check whether DPOD's internal database is up and working |
| Internal Alerts - Check Dropped Syslogs Interval in Seconds | Health | 600 | How often to check whether DPOD's syslog agents lost incoming messages |
| Internal Alerts - Check Dropped WS-M Messages Interval in Seconds | Health | 600 | How often to check whether DPOD's WS-M agents lost incoming payloads |
| Internal Alerts - Check ES Interval in Seconds | Health | 300 | How often to check whether DPOD's big data component is up and working |
| Internal Alerts - Check File System Interval in Seconds | Health | 300 | How often to check whether DPOD's filesystem is out of space |
| Internal Alerts - Check Retention Interval in Seconds | Health | 300 | How often to check whether DPOD's internal big data retention process is working |
| Internal Alerts - Check Log Targets Misconfig Interval in Seconds | Health | 43200 | How often to check whether the monitored gateways for misconfigured DPOD log targets |
| Internal Alerts - Send Email on Alert | Health | false | Whether or not to send an Email when a problem was detected by the internal health monitoring |
| Internal Alerts - Email Destination Address for Alerts | Health | No Default | Destination Email address for sending internal health alerts |
| Internal Alerts - Send Syslog on Alert | Health | false | Whether or not to send a Syslog message when a problem was detected by the internal health monitoring |
| Interval in Seconds to Sample Logging Targets | Health | 300 | How often to sample DPOD's log targets in the monitored devices |
| Interval in Seconds to Sample Nodes Health Statistics | Health | 300 | How often to collect statistics on DPOD's big data nodes |
| Interval in Seconds to Monitor Objects Status | Health | 300 | How often to monitor enabled but down objects in the monitored devices |
| Object Status Monitor Class List (All, Default or a Custom List) | Health | Default | By default, the Failed Objects dashboard (under the "explore" menu) displays only common object classes, |
| Interval in Seconds to Sample WSM Agents Statistics | Health | 300 | How often to sample WS-M Agents in the monitored devices |
| Internal Alerts REST API Service Host | Health | localhost | Host name / IP address of the maintenance housekeeping server to save and publish internal alerts. |
| Internal Alerts REST API Service Port | Health | 8084 | Port of the maintenance housekeeping service to save and publish internal alerts. |
DevOps Portal Parameters
| Parameter | Category | Default | Description |
|---|---|---|---|
| Path and Name of Local WSDL Analyze Script | ServicesPortal | /app/custom/scripts/download_wsdl_artifacts_sample.py | The path and name of the user configurable python script for analyzing local WSDL |
| Path and Name of Local WSDL Replace Script | ServicesPortal | /app/custom/scripts/replace_wsdl_references_sample.py | The path and name of the user configurable python script for replacing local WSDL references |
| Enable Services Portal Operations for non-Admin Users | ServicesPortal | true | Enable or disable access of non-admin users to DevOps portal actions |
| Temporary Device Name for WSDL Validations Operations | ServicesPortal | (no default) | Device name that will be used to create temporary services for WSDL validations, the device must be monitored by DPOD |
| Temporary Domain Name for WSDL Validations Operations | ServicesPortal | (no default) | Temporary domain name that will be used to create temporary services for WSDL validations The domain needs to exist, DPOD will not create it |
| Local WSDL Files Max Upload Size in KB | ServicesPortal | 300 | Upload size limit for each WSDL or XSD file used in Local WSDL Validation/Promotion. Change will take effect after hitting refresh in the browser's window. |
| Import Service Max Upload File Size in KB | ServicesPortal | 10000 | Upload size limit for the import file in KB |
| Import Service Deployment Policies Path | ServicesPortal | /tmp | The dropdown with the selection of deployment policy files will be read from this folder (ZIP, XML and XCFG files only) |
| Service Import Temp Working Path | ServicesPortal | /app/tmp/servicesportal/import | Import files and deployment policies will be copied and processed in this folder |
| Path and Name of Import Service Validation Script | ServicesPortal | /app/custom/scripts/import_service_validation.py | The path and name of the user configurable python script for validating the import file |
| Path and Name of Import Service Deployment Policy Script | ServicesPortal | /app/custom/scripts/import_service_deppolicy_selector.py | The path and name of the user configurable python script for overriding the user selected deployment policy |
| Deployment Policy is Mandatory for Import Service | ServicesPortal | true | Is deployment policy mandatory for imports |
Custom/Logical Transaction
| Parameter | Category | Default | Description |
|---|---|---|---|
| Allow Monitoring Transactions in Default Domain | Transactions | false | Whether or not the "Support TX in the Default Domain" box will be displayed in the Monitored Devices→Setup page |
| Show Custom Transaction View Selection | Transactions | false | Whether or not the "Custom TX View" checkbox will be displayed in the Product Views |
| Default Transactions Source (syslog/logical) | Transactions | syslog | If the "Custom TX View" is displayed, what will be the default for users on their first sign in. |
| Logical Transaction, Custom String 1 Table Header | Transactions | Custom String 1 | The Table Header and Filter names for "Custom String 1" in the transactions page |
| Logical Transaction, Custom String 2 Table Header | Transactions | Custom String 2 | The Table Header and Filter names for "Custom String 2" in the transactions page |
| Transaction Analysis Level - User Override Path | Transactions | (blank) | Where to take the user override file for the syslog analysis message groups, no value (blank) means there is no override file |
| Transaction Analysis Level - Max TPS | Transactions | Core, MemoryReqRes, B2B, error | The message group names and log level for the Max TPS analysis level, |
| Transaction Analysis Level - More TPS | Transactions | Core, MemoryReqRes, B2B, notice | The message group names and log level for the More TPS analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed. |
| Transaction Analysis Level - Balanced | Transactions | Core, MemoryReqRes, B2B, MemActionLevel, notice | The message group names and log level for the Balanced analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed. |
| Transaction Analysis Level - More Data | Transactions | Core, MemoryReqRes, B2B, MemActionLevel, ReqPayloadSize, ExtLatency, info | The message group names and log level for the More Data analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed. |
| Transaction Analysis Level - Max Data | Transactions | Core, MemoryReqRes, B2B, MemActionLevel, ReqPayloadSize, ExtLatency, Sidecalls, info | The message group names and log level for the Max Data analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed. |
| Deprecated Extended Transaction Enabled | Transactions | false | If true system will show by default the Deprecated Extended Transaction page. |
Size of next/previous transaction results | Transactions | default | The Size of next/previous transaction results. The default is the size of the transactions list page from where the user clicked on the Transaction id link. |
Miscellaneous Parameters
The following parameters control various other functions.
Parameter | Category | Default Value | Description |
|---|---|---|---|
Enable agents management | Agents | true | Set to true, unless using an External Self Service Console installation, in which case it should be false. |
Certificate monitoring duration in days | Certificate Monitoring | 60 | DataPower Gateways are able to send an alert a configurable number of days before certificates are about to expire. DPOD leverages this ability in the certificate monitoring screens. When a new monitored device is added to DPOD, the value in this parameter is copied to the corresponding parameter on the device. This value does not affect already-monitored devices. If you wish to change this in previously added devices, you need to do so manually. |
| Time to Keep WS-M Payloads (1d, 1w, blank) | WSM | (blank) | Automatically delete WS-M payloads from store, possible values are 1d = one day, 1w = one week, no value = don't delete automatically |
| Interval in Seconds to Sample Gateway MQ Objects Stats | WDP Objects | 300 | How often to sample the gateway's MQ objects, the data is shown in the Gateway MQ Overview dashboard |
| Interval in Seconds to Analyze Audit Logs | Restarts | 300 | How often to sample the gateway's audit logs, this data will be used for the restarts dashboard |
System Parameters
| Parameter | Category | Default Value | Description |
|---|---|---|---|
| Is Internal Self Service Installation | System | true | Is the current DPOD installation an Internal Self Service Console - change this value only for external self service console scenarion |
| Internal Self Service Address | System | https://montier-management | The address of the internal Self Service Console - change this value only for external self service console scenarion |
| Internal Self Service User Name | System | (no default) | The DPOD user name that will be used to access the internal Self Service Console - change this value only for external self service console scenarion We recommend that you create a new user for this purpose |
| Internal Self Service Password | System | (no default) | The DPOD user's passwordthat will be used to access the internal Self Service Console - change this value only for external self service console scenarion |
| Internal Self Service Webserver Port | System | 443 | The internal Self Service Console's webserver port - change this value only for external self service console scenarion |
| Interval in Seconds to Check and Cleanup DB Tables | System | 28800 | Interval in seconds to cleanup DB tables that exceeded the threshold size (threshold for each table is defined in a different system parameter) |
| Threshold in MB to Clean Reports Execution Table | System | 100 | Threshold in MB to cleanup the reports execution DB table |
| Threshold in MB to Clean Alerts Execution Table | System | 200 | Threshold in MB to cleanup the alerts execution DB table |
| Threshold in MB to Clean Services Portal Execution Table | System | 100 | Threshold in MB to cleanup the services portal execution DB table |
| Threshold in MB to Clean Maintenance Plan Execution | System | 100 | Threshold in MB to cleanup the maintenance execution DB tables (backup, sync and firmware upgrade) |
| The HTTP Address of the UI | System | (no default) | The URL used to access DPOD Web Console root context, e.g. https://dpod.example.com (without /op or /admin suffixes). This URL will be used to create URLs to DPOD Web Console that are embedded in emails sent by maintenance plans or sharing by email from the Web Console. |
| The HTTP Address of the UI - External (optional) | System | (no default) | The URL used to access DPOD Web Console root context from external networks, e.g. https://dpod.example.com (without /op or /admin suffixes). If this URL if specified, an additional link will be added to email addresses where "The HTTP Address of the UI" is used, to allow external users to have an additional link they can use instead of the internal link. |
| Experimental Features | Experimental | (no default) | For support use only, do not change unless advised by L2/L3 support |