System Parameters List

IBM DataPower Operations Dashboard contains an extensive set of parameters that let administrators fine-tune the system's behavior to the installation requirements.
The following sections describe these parameters in detail.

The parameters are accessible through the System Parameters page: [Manage → Customize → System Parameters].

Appliance Maintenance

The Appliance Maintenance (Backup, Sync and Firmware upgrade) system parameters are listed on a separate page.

APM

Parameter	Category	Default Value	Description
APM Integration Syslog App Name	APM Integration	DPOD-MSC1	Logical name used by APM to indentify DPOD.
APM Integration Target Syslog Host	APM Integration	172.77.77.7	APM's IP address or hostname
APM Integration Target Syslog Port	APM Integration	60030	APM's listening port
APM Integration Target Syslog Protocol	APM Integration	tcp	APM's listening protocol for Syslog
APM Integration Target Syslog SSL	APM Integration	false	Is conncetion secured?
APM Integration Events Publishing Enable	APM Integration	true	Activate / Disable integration between DPOD and APM installation.

Alerts

Parameter	Category	Default Value	Description
Enable Queries Emails SMTP	Alerts	true	Enable / Disable publishing alerts via SMTP server
Enable Queries Emails SMTP WS	Alerts	false	Enable / Disable publishing alerts via Web Service
Fields to Ignore in ElasticSearch Response in Alerts	Alerts	doc_count_error_upper_bound,sum_other_doc_count	Field to omit from alert description
Enable Queries Output File	Alerts	false	Enable / Disable publishing alerts as file in local file system
Syslog Severity Field Value	Alerts	info	Syslog record message level. Possible values: debug, info, notice, warning, err, crit, alert, emerg
Alerts Syslog Server Hostname	Alerts		Syslog server hostname or IP address.
Alerts Syslog Server Port	Alerts		Syslog server listening port.

Dashboards

Parameter	Category	Default Value	Description
IDG Transactions Page Columns	Dashboards	Transaction ID, Service Name, Operation, Time, Device, Domain, Status, Client IP, Global Transaction ID, Elapsed, Payload	Controls which columns will appear in the Investigate->Transactions Page, you can omit or reorder the columns. Any mistakes in the input will cause the display to revert to the default value. The Payload field will not appear to users that does not have authorization to view payloads Possible values (not case sensitive): Transaction ID, Service Name, Operation, Time, Device, Domain, Status, Client IP, Global Transaction ID, Elapsed, Payload
IDG Raw Message Page Columns	Dashboards	Transaction ID, Device, Domain, Category, Severity, Time, Direction, Object Type, Object Name, Client IP, Message Code, Message	Controls which columns will appear in the Investigate→Raw Messages Page, you can omit or reorder the columns. Any mistake in the input will cause the display to revert to the default value. Possible values (not case sensitive): Device, Domain, Category, Severity, Time, Direction, Object Type, Object Name, Transaction ID, Client IP, Message Code, Message, Global Transaction ID, B2B Message ID, B2B From Partner ID, B2B to Partner ID, B2B from partner profile, B2B to Partner Profile,
APIC Transactions Page Columns	Dashboards	Transaction ID, Time, Device, Catalog Name, Space Name, Product, Plan Name, API Name, API Version, APP Name, Method, URI, HTTP Res. Code, Client IP, Elapsed, Payload	Controls which columns will appear in the APIC Investigate->Transactions Page, you can omit or reorder the columns. Any mistakes in the input will cause the display to revert to the default value. The Payload field will not appear to users that does not have authorization to view payloads Possible values (not case sensitive): Transaction ID, Time, Device, Domain, Catalog Name, Space Name, Product, Plan Name, API Name, API Version, APP Name, Method, URI, Status, HTTP Res. Code, Client IP, Global Transaction ID, Elapsed, Payload, Gateway Type
Service URI Dashboard Percentiles (3 comma separated decimals)	Dashboards	90.0, 95.0, 99.0	Controls the percentiles shown in the rightmost columns of the Service URI Calls page and the API URI calls page, enter decimal values between 0-99.9
Service URL Dashboard Percentiles (3 comma separated decimals)	Dashboards	90.0, 95.0, 99.0	Controls the percentiles shown in the rightmost columns of the Service URL Calls page and the API URL calls page, enter decimal values between 0-99.9
API-C Policies Dashboard Percentiles (3 comma separated decimals)	Dashboards	90.0, 95.0, 99.0	Controls the percentiles shown in the rightmost columns of the API Policies page, enter decimal values between 0-99.9
APIC Recent Activity Page Latency Percentile	Dashboards	90.0	Controls the percentile shown in the APIC Recent Activity page, enter a decimal value between 0-99.9

Device Health

Parameter	Category	Default Value	Description
System Health Dashboard Sample Time Range (min.)	Device Health	5	See "Device Health Calculation" in System Health

Reports

For more information see reports or configuring sending reports in mail.

Parameter	Category	Default Value	Description
Enable Reports Emails SMTP	Reports	true	Enables sending reports via SMTP
Enable Reports Emails SMTP WS	Reports	false	Enables sending reports via a Web-Service
Enable Reports Output File	Reports	false	Enables writing reports to a local file-system. (Defaults to /data/reports)
Fields to ignore in ElasticSearch response	Reports	doc_count_error_upper_bound,sum_other_doc_count	For internal use, do not change unless instructed to do so by product support.

When sending notifications via SMTP or SMTP WS, the following parameters determine how those notifications are sent.

When SMTP or SMTP-WS is selected as the reporting behavior, all parameters relating this behavior must be provided. See reports for more information.

Parameter	Category	Default Value	Description
From Address	Email	from@example.com	The from address used for the report email.
SMTP Host	Email SMTP	smtp.example.com	Destination SMTP host
SMTP Password	Email SMTP		Password for logging in to the SMTP host. If no authentication required leave this field empty.
SMTP Port	Email SMTP	465	Destination SMTP host port
SMTP User	Email SMTP	mailer@example.com	Username for logging in to the SMTP host. If no authentication required leave this field empty.
SMTP SSL Enabled	Email SMTP	true	Enable / Disable TLS/SSL

SMTP WS Endpoint URI	Email SMTP WS	/SMTPSender	Destination URI for sending reports via Web-Service
SMTP WS Host	Email SMTP WS	localhost	Destination hostname for sending reports via Web-Service
SMTP WS Port	Email SMTP WS	8080	Destination port for sending reports via Web-Service
SMTP WS Protocol	Email SMTP WS	HTTP	Protocol for accessing the Web-Service host Valid values: HTTP / HTTPS
SMTP WS User	Email SMTP WS	user	User used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication.
SMTP WS Password	Email SMTP WS		Password used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication.

LDAP

The following parameters control configuration and connection to an LDAP registry, used for role-based security.

The LDAP parameters should not be altered manually and should exactly match the values in the services configuration files.
Instead, use the LDAP Configuration Script which tests the parameters, encrypts the passwords and changes the configuration files in addition to System Parameters.

Parameter	Category	Default Value	Description
Enable LDAP	LDAP	false	See LDAP Configuration Script
LDAP Connection URLs	LDAP		See LDAP Configuration Script
Enable LDAP Host Name Verification	LDAP	true	See LDAP Configuration Script
LDAP Connection Name (DN)	LDAP		See LDAP Configuration Script
LDAP Connection Password	LDAP		See LDAP Configuration Script
LDAP Referral (ignore/follow)	LDAP	ignore	See LDAP Configuration Script
LDAP User Search Base	LDAP		See LDAP Configuration Script
LDAP User Search Filter	LDAP		See LDAP Configuration Script
LDAP User Name Attribute Name	LDAP		See LDAP Configuration Script
LDAP Group Search Base	LDAP		See LDAP Configuration Script
LDAP Group Membership Search Filter	LDAP		See LDAP Configuration Script
LDAP Group Membership Search Nested	LDAP	true	See LDAP Configuration Script
LDAP Group Name Search Filter	LDAP	true	See LDAP Configuration Script
LDAP Group Name Attribute Name	LDAP	cn	See LDAP Configuration Script

Monitored Devices Authentication

The following parameters control authentication of monitored DataPower Gateways.

When DPOD collects data from monitored devices, it verifies that these are the correct devices using TLS; The DataPower certificate is authenticated against DPOD’s CA trust store, specified below.

Parameter	Category	Default Value	Description
Certificate Monitoring Duration in Days	Security	60	DataPower Gateways are able to send an alert a configurable number of days before certificates are about to expire. DPOD leverages this ability in the certificate monitoring screens. When a new monitored device is added to DPOD, the value in this parameter is copied to the corresponding parameter on the device. This value does not affect already-monitored devices. If you wish to change this in previously added devices, you need to do so manually.
Local User Registry Enabled	Security	false (for new installations v1.0.7+) true (when upgrading from v1.0.6)	When disabled, DPOD will not store any new user details in local repository to comply with Security complaince requirements (DPOD will not automatically delete any existing user details after changing the value of this parameter)
TLS Level (TLSv1/TLSv1.1/TLSv1.2)	Security	TLSv1.2	TLS level used to perform authentication
CA Trusted Keystore Password	Security	********	Trust store password
CA Trusted Keystore Full Path and Filename	Security	/app/java/lib/security/cacerts	Trust store full path
CA Trusted Keystore Type (JKS/PKCS12)	Security	JKS	Trust store type

Configuration Changes Tracking

DPOD collects data about DataPower configuration changes from its monitored devices. It does this by pulling the complete configuration from the device, and comparing it to the last collected configuration. The parameters below control this mechanism.

Consult the table on System Services Management for more information about the types of agents in DPOD and the information they collect.

Parameter

Category

Default Value

Description

Show Service Configuration Changes in Human Readable Form

ServiceConfig

true

whether to see only the property name that changed or all the xml(which is hard to understand)

Interval in Hours to Compress Service Configuration Table

ServiceConfig

24

For internal use, do not change unless instructed to do so by product support.

Console UI Appearance

These parameters control the way data is displayed in DPOD's Console UI.

Parameter	Category	Default	Description
Default CSV Date Format	Style	yyyy/MM/dd HH:mm:ss.SSS	Full date format
Default Full Date Format	Style	MM/dd/yyyy HH:mm:ss.SSS	Full date format
Default Date Format with no Millis	Style	MM/dd/yyyy HH:mm:ss	Full date format, without milliseconds
Default Date Format with no Year	Style	MM/dd HH:mm:ss.SSS	Full date format, without year
Default Short Date Format	Style	MM/dd/yyyy	Short date format
Default Theme (light/dark/elegant)	Style	Light	Light, dark or elegant theme of the console UI screens

Internal Health

Parameter	Category	Default	Description
Internal Alerts - Send Email on Alert	Health	false	Whether or not to send an Email when a problem was detected by the internal health monitoring
Internal Alerts - Email Destination Address for Alerts	Health	No Default	Destination Email address for sending internal health alerts
Internal Alerts - Send Syslog on Alert	Health	false	Whether or not to send a Syslog message when a problem was detected by the internal health monitoring
Internal Alerts - Send Email on Alert via Web Service	Health	false	Whether or not to send an Email via Web Service when a problem was detected by the internal health monitoring
Object Status Monitor Class List (All, Default or a Custom List)	Health	Default	By default, the Failed Objects dashboard (under the "explore" menu) displays only common object classes, set this option to All to make it sample all object classes in the monitored gateways, or enter a custom list of comma separated classes

DevOps Portal Parameters

Parameter	Category	Default	Description
Path and Name of Local WSDL Analyze Script	ServicesPortal	/app/custom/scripts/download_wsdl_artifacts_sample.py	The path and name of the user configurable python script for analyzing local WSDL
Path and Name of Local WSDL Replace Script	ServicesPortal	/app/custom/scripts/replace_wsdl_references_sample.py	The path and name of the user configurable python script for replacing local WSDL references
Enable Services Portal Operations for non-Admin Users	ServicesPortal	true	Enable or disable access of non-admin users to DevOps portal actions
Temporary Device Name for WSDL Validations Operations	ServicesPortal	(no default)	Device name that will be used to create temporary services for WSDL validations, the device must be monitored by DPOD
Temporary Domain Name for WSDL Validations Operations	ServicesPortal	(no default)	Temporary domain name that will be used to create temporary services for WSDL validations The domain needs to exist, DPOD will not create it
Local WSDL Files Max Upload Size in KB	ServicesPortal	300	Upload size limit for each WSDL or XSD file used in Local WSDL Validation/Promotion. Change will take effect after hitting refresh in the browser's window.
Import Service Max Upload File Size in KB	ServicesPortal	10000	Upload size limit for the import file in KB
Import Service Deployment Policies Path	ServicesPortal	/tmp	The dropdown with the selection of deployment policy files will be read from this folder (ZIP, XML and XCFG files only)
Path and Name of Import Service Validation Script	ServicesPortal	/app/custom/scripts/import_service_validation.py	The path and name of the user configurable python script for validating the import file
Path and Name of Import Service Deployment Policy Script	ServicesPortal	/app/custom/scripts/import_service_deppolicy_selector.py	The path and name of the user configurable python script for overriding the user selected deployment policy
Deployment Policy is Mandatory for Import Service	ServicesPortal	true	Is deployment policy mandatory for imports

Custom/Logical Transaction

Parameter	Category	Default	Description
Enable Api-Stats Category Mode	Transactions	false
Allow Monitoring Transactions in Default Domain	Transactions	false	Whether or not the "Support TX in the Default Domain" box will be displayed in the Monitored Devices→Setup page
Show Custom Transaction View Selection	Transactions	false	Whether or not the "Custom TX View" checkbox will be displayed in the Product Views
Default Transactions Source (syslog/logical)	Transactions	syslog	If the "Custom TX View" is displayed, what will be the default for users on their first sign in.
Logical Transaction, Custom String 1 Table Header	Transactions	Custom String 1	The Table Header and Filter names for "Custom String 1" in the transactions page
Logical Transaction, Custom String 2 Table Header	Transactions	Custom String 2	The Table Header and Filter names for "Custom String 2" in the transactions page
Transaction Analysis Level - User Override Path	Transactions	(blank)	Where to take the user override file for the syslog analysis message groups, no value (blank) means there is no override file
Transaction Analysis Level - Max TPS	Transactions	Core, MemoryReqRes, B2B, error	The message group names and log level for the Max TPS analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - More TPS	Transactions	Core, MemoryReqRes, B2B, notice	The message group names and log level for the More TPS analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - Balanced	Transactions	Core, MemoryReqRes, B2B, MemActionLevel, notice	The message group names and log level for the Balanced analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - More Data	Transactions	Core, MemoryReqRes, B2B, MemActionLevel, ReqPayloadSize, ExtLatency, info	The message group names and log level for the More Data analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - Max Data	Transactions	Core, MemoryReqRes, B2B, MemActionLevel, ReqPayloadSize, ExtLatency, Sidecalls, info	The message group names and log level for the Max Data analysis level, The last parameter must be a valid log level name (debug, info, notice, warn. error, critic). The values must be comma separated, lower, upper or mixed case are allowed.
Size of next/previous transaction results	Transactions	default	The size of next/previous transaction results. The default is the size of the transactions list page from where the user clicked on the transaction ID link.

Miscellaneous Parameters

The following parameters control various other functions.

Parameter	Category	Default Value	Description
Enable agents management	Agents	true	Set to true, unless using an External Self Service Console installation, in which case it should be false.
Time to Keep WS-M Payloads (1d, 1w, blank)	WSM	(blank)	Automatically delete WS-M payloads from store, possible values are 1d = one day, 1w = one week, no value = don't delete automatically