IBM DataPower Operations Dashboard v1.0.16.0

A newer version of this product documentation is available.

You are viewing an older version. View latest at IBM DPOD Documentation.

System Parameters List

IBM DataPower Operations Dashboard contains an extensive set of parameters that let administrators fine-tune the system's behavior to the installation requirements.
The following sections describe these parameters in detail. 

The parameters are accessible through the System Parameters page: [Manage → Customize → System Parameters].

Appliance Maintenance

The Appliance Maintenance (Backup, Sync and Firmware upgrade) system parameters are listed on a separate page.

APM

ParameterCategoryDefault ValueDescription
APM Integration Syslog App NameAPM IntegrationDPOD-MSC1Logical name used by APM to indentify DPOD.
APM Integration Target Syslog HostAPM Integration172.77.77.7APM's IP address or hostname
APM Integration Target Syslog PortAPM Integration60030APM's listening port
APM Integration Target Syslog ProtocolAPM IntegrationtcpAPM's listening protocol for Syslog
APM Integration Target Syslog SSLAPM IntegrationfalseIs conncetion secured? 
APM Integration Events Publishing EnableAPM IntegrationtrueActivate / Disable integration between DPOD and APM installation.

Alerts

ParameterCategoryDefault ValueDescription
Enable Queries Emails SMTPAlertstrueEnable / Disable publishing alerts via SMTP server
Enable Queries Emails SMTP WSAlertsfalseEnable / Disable publishing alerts via Web Service
Fields to Ignore in ElasticSearch Response in AlertsAlertsdoc_count_error_upper_bound,sum_other_doc_countField to omit from alert description
Enable Queries Output FileAlertsfalseEnable / Disable publishing alerts as file in local file system
Syslog Severity Field ValueAlertsinfoSyslog record message level.
Possible values: debug, info, notice, warning, err, crit, alert, emerg
Alerts Syslog Server HostnameAlerts
Syslog server hostname or IP address.
Alerts Syslog Server PortAlerts
Syslog server listening port.

Dashboards

Parameter

Category

Default Value

Description

IDG Transactions Page ColumnsDashboardsTransaction ID, Service Name, Operation, Time, Device, Domain, Status, Client IP, Global Transaction ID, Elapsed, PayloadControls which columns will appear in the Investigate->Transactions Page, you can omit or reorder the columns.
Any mistakes in the input will cause the display to revert to the default value.
The Payload field will not appear to users that does not have authorization to view payloads

Possible values (not case sensitive):
Transaction ID, Service Name, Operation, Time, Device, Domain, Status, Client IP, Global Transaction ID, Elapsed, Payload
IDG Raw Message Page ColumnsDashboardsTransaction ID, Device, Domain, Category, Severity, Time, Direction, Object Type, Object Name, Client IP, Message Code, Message

Controls which columns will appear in the Investigate→Raw Messages Page, you can omit or reorder the columns.
Any mistake in the input will cause the display to revert to the default value.

Possible values (not case sensitive):
Device, Domain, Category, Severity, Time, Direction, Object Type, Object Name, Transaction ID, Client IP, Message Code, Message, Global Transaction ID, B2B Message ID, B2B From Partner ID, B2B to Partner ID, B2B from partner profile, B2B to Partner Profile, 

APIC Transactions Page ColumnsDashboardsTransaction ID, Time, Device, Catalog Name, Space Name, Product, Plan Name, API Name, API Version, APP Name, Method, URI, HTTP Res. Code, Client IP, Elapsed, Payload

Controls which columns will appear in the APIC Investigate->Transactions Page, you can omit or reorder the columns.
Any mistakes in the input will cause the display to revert to the default value.
The Payload field will not appear to users that does not have authorization to view payloads

Possible values (not case sensitive):
Transaction ID, Time, Device, Domain,  Catalog Name, Space Name, Product, Plan Name, API Name, API Version, APP Name, Method, URI, Status, HTTP Res. Code, Client IP, Global Transaction ID, Elapsed, Payload, Gateway Type

Service URI Dashboard Percentiles (3 comma separated decimals)

Dashboards

90.0, 95.0, 99.0

Controls the percentiles shown in the rightmost columns of the Service URI Calls page and the API URI calls page, enter decimal values between 0-99.9

Service URL Dashboard Percentiles (3 comma separated decimals)

Dashboards

90.0, 95.0, 99.0

Controls the percentiles shown in the rightmost columns of the Service URL Calls page and the API URL calls page, enter decimal values between 0-99.9

API-C Policies Dashboard Percentiles (3 comma separated decimals)Dashboards90.0, 95.0, 99.0Controls the percentiles shown in the rightmost columns of the API Policies page, enter decimal values between 0-99.9
APIC Recent Activity Page Latency PercentileDashboards90.0Controls the percentile shown in the APIC Recent Activity page, enter a decimal value between 0-99.9

Device Health

ParameterCategoryDefault ValueDescription
System Health Dashboard Sample Time Range (min.)Device Health5See "Device Health Calculation" in System Health

Reports

For more information see reports or configuring sending reports in mail.

Parameter

Category

Default Value

Description

Enable Reports Emails SMTP 

Reports

true

Enables sending reports via SMTP

Enable Reports Emails SMTP WS 

Reports

false

Enables sending reports via a Web-Service

Enable Reports Output File 

Reports

false

Enables writing reports to a local file-system. (Defaults to /data/reports)

Fields to ignore in ElasticSearch response

Reports

doc_count_error_upper_bound,sum_other_doc_count

For internal use, do not change unless instructed to do so by product support.

  

Emails and SMTP (For report publishing, alerts, share, maintenanace plans etc)

When sending notifications via SMTP or SMTP WS, the following parameters determine how those notifications are sent.

When SMTP or SMTP-WS is selected as the reporting behavior, all parameters relating this behavior must be provided. See reports for more information.

Parameter

Category

Default Value

Description

From Address

Email

from@example.com

The from address used for the report email.

SMTP Host

Email SMTP

smtp.example.com

Destination SMTP host

SMTP Password

Email SMTP


Password for logging in to the SMTP host. If no authentication required leave this field empty.

SMTP Port

Email SMTP

465

Destination SMTP host port

SMTP User

Email SMTP

mailer@example.com

Username for logging in to the SMTP host. If no authentication required leave this field empty.

SMTP SSL EnabledEmail SMTPtrueEnable / Disable TLS/SSL


SMTP WS Endpoint URI

Email SMTP WS

/SMTPSender

Destination URI for sending reports via Web-Service

SMTP WS Host

Email SMTP WS

localhost

Destination hostname for sending reports via Web-Service

SMTP WS Port

Email SMTP WS

8080

Destination port for sending reports via Web-Service

SMTP WS Protocol

Email SMTP WS

HTTP

Protocol for accessing the Web-Service host

Valid values: HTTP / HTTPS

SMTP WS User

Email SMTP WS

user

User used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication.

SMTP WS Password

Email SMTP WS


Password used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication.

LDAP

The following parameters control configuration and connection to an LDAP registry, used for role-based security.

The LDAP parameters should not be altered manually and should exactly match the values in the services configuration files.
Instead, use the LDAP Configuration Script which tests the parameters, encrypts the passwords and changes the configuration files in addition to System Parameters.


Parameter

Category

Default Value

Description

Enable LDAPLDAPfalseSee LDAP Configuration Script
LDAP Connection URLsLDAP
See LDAP Configuration Script
Enable LDAP Host Name VerificationLDAPtrueSee LDAP Configuration Script

LDAP Connection Name (DN)

LDAP


See LDAP Configuration Script

LDAP Connection Password

LDAP


See LDAP Configuration Script

LDAP Referral (ignore/follow)

LDAP

ignore

See LDAP Configuration Script
LDAP User Search BaseLDAP
See LDAP Configuration Script
LDAP User Search FilterLDAP
See LDAP Configuration Script

LDAP User Name Attribute Name

LDAP


See LDAP Configuration Script

LDAP Group Search BaseLDAP
See LDAP Configuration Script
LDAP Group Membership Search FilterLDAP
See LDAP Configuration Script

LDAP Group Membership Search Nested

LDAP

true

See LDAP Configuration Script

LDAP Group Name Search FilterLDAPtrue

See LDAP Configuration Script

LDAP Group Name Attribute Name

LDAP

cn

See LDAP Configuration Script

Monitored Devices Authentication

The following parameters control authentication of monitored DataPower Gateways.

When DPOD collects data from monitored devices, it verifies that these are the correct devices using TLS; The DataPower certificate is authenticated against DPOD’s CA trust store, specified below.

Parameter

Category

Default Value

Description

Certificate Monitoring Duration in DaysSecurity60

DataPower Gateways are able to send an alert a configurable number of days before certificates are about to expire. DPOD leverages this ability in the certificate monitoring screens.

When a new monitored device is added to DPOD, the value in this parameter is copied to the corresponding parameter on the device.

This value does not affect already-monitored devices. If you wish to change this in previously added devices, you need to do so manually.

Local User Registry EnabledSecurity

false (for new installations v1.0.7+)

true (when upgrading from v1.0.6)

When disabled, DPOD will not store any new user details in local repository to comply with Security complaince requirements
(DPOD will not automatically delete any existing user details after changing the value of this parameter)

TLS Level (TLSv1/TLSv1.1/TLSv1.2)

Security

TLSv1.2

TLS level used to perform authentication

CA Trusted Keystore Password

Security

********

Trust store password

CA Trusted Keystore Full Path and Filename

Security

/app/java/lib/security/cacerts

Trust store full path

CA Trusted Keystore Type (JKS/PKCS12)

Security

JKS

Trust store type

Configuration Changes Tracking

DPOD collects data about DataPower configuration changes from its monitored devices. It does this by pulling the complete configuration from the device, and comparing it to the last collected configuration. The parameters below control this mechanism.

Consult the table on System Services Management for more information about the types of agents in DPOD and the information they collect.

Parameter

Category

Default Value

Description

Show Service Configuration Changes in Human Readable Form

ServiceConfig

true

whether to see only the property name that changed  or all the xml(which is hard to understand)

Interval in Hours to Compress Service Configuration Table

ServiceConfig

24

For internal use, do not change unless instructed to do so by product support.


Console UI Appearance

These parameters control the way data is displayed in DPOD's Console UI

Parameter

Category

Default

Description

Default CSV Date FormatStyleyyyy/MM/dd HH:mm:ss.SSSFull date format

Default Full Date Format

Style

MM/dd/yyyy HH:mm:ss.SSS

Full date format

Default Date Format with no Millis

Style

MM/dd/yyyy HH:mm:ss

Full date format, without milliseconds

Default Date Format with no Year

Style

MM/dd HH:mm:ss.SSS

Full date format, without year

Default Short Date Format

Style

MM/dd/yyyy

Short date format

Default Theme (light/dark/elegant)

Style

Light

Light, dark or elegant theme of the console UI screens

Internal Health

ParameterCategoryDefaultDescription
Internal Alerts - Send Email on Alert HealthfalseWhether or not to send an Email when a problem was detected by the internal health monitoring
Internal Alerts - Email Destination Address for AlertsHealthNo DefaultDestination Email address for sending internal health alerts
Internal Alerts - Send Syslog on AlertHealthfalseWhether or not to send a Syslog message when a problem was detected by the internal health monitoring
Internal Alerts - Send Email on Alert via Web ServiceHealthfalseWhether or not to send an Email via Web Service when a problem was detected by the internal health monitoring
Object Status Monitor Class List (All, Default or a Custom List)HealthDefault

By default, the Failed Objects dashboard (under the "explore" menu) displays only common object classes,
set this option to All to make it sample all object classes in the monitored gateways, or enter a custom list of comma separated classes

DevOps Portal Parameters

ParameterCategoryDefaultDescription
Path and Name of Local WSDL Analyze ScriptServicesPortal/app/custom/scripts/download_wsdl_artifacts_sample.pyThe path and name of the user configurable python script for analyzing local WSDL
Path and Name of Local WSDL Replace ScriptServicesPortal/app/custom/scripts/replace_wsdl_references_sample.pyThe path and name of the user configurable python script for replacing local WSDL references
Enable Services Portal Operations for non-Admin UsersServicesPortaltrueEnable or disable access of non-admin users to DevOps portal actions
Temporary Device Name for WSDL Validations OperationsServicesPortal(no default)Device name that will be used to create temporary services for WSDL validations, the device must be monitored by DPOD
Temporary Domain Name for WSDL Validations OperationsServicesPortal(no default)Temporary domain name that will be used to create temporary services for WSDL validations
The domain needs to exist, DPOD will not create it
Local WSDL Files Max Upload Size in KBServicesPortal300Upload size limit for each WSDL or XSD file used in Local WSDL Validation/Promotion.
Change will take effect after hitting refresh in the browser's window.
Import Service Max Upload File Size in KBServicesPortal10000Upload size limit for the import file in KB
Import Service Deployment Policies PathServicesPortal/tmpThe dropdown with the selection of deployment policy files will be read from this folder (ZIP, XML and XCFG files only)
Path and Name of Import Service Validation ScriptServicesPortal/app/custom/scripts/import_service_validation.pyThe path and name of the user configurable python script for validating the import file
Path and Name of Import Service Deployment Policy ScriptServicesPortal/app/custom/scripts/import_service_deppolicy_selector.pyThe path and name of the user configurable python script for overriding the user selected deployment policy
Deployment Policy is Mandatory for Import ServiceServicesPortaltrueIs deployment policy mandatory for imports

Custom/Logical Transaction

ParameterCategoryDefaultDescription
Enable Api-Stats Category ModeTransactionsfalse
Allow Monitoring Transactions in Default DomainTransactionsfalseWhether or not the "Support TX in the Default Domain" box will be displayed in the Monitored Devices→Setup page
Show Custom Transaction View SelectionTransactionsfalseWhether or not the "Custom TX View" checkbox will be displayed in the Product Views  
Default Transactions Source (syslog/logical)TransactionssyslogIf the "Custom TX View" is displayed, what will be the default for users on their first sign in.
Logical Transaction, Custom String 1 Table HeaderTransactionsCustom String 1The Table Header and Filter names for "Custom String 1" in the transactions page
Logical Transaction, Custom String 2 Table HeaderTransactionsCustom String 2The Table Header and Filter names for "Custom String 2" in the transactions page
Transaction Analysis Level - User Override PathTransactions(blank)Where to take the user override file for the syslog analysis message groups, no value (blank) means there is no override file
Transaction Analysis Level - Max TPSTransactionsCore, MemoryReqRes, B2B, error

The message group names and log level for the Max TPS analysis level,
The last parameter must be a valid log level name (debug, info, notice, warn. error, critic).
The values must be comma separated, lower, upper or mixed case are allowed.

Transaction Analysis Level - More TPSTransactionsCore, MemoryReqRes, B2B, noticeThe message group names and log level for the More TPS analysis level,
The last parameter must be a valid log level name (debug, info, notice, warn. error, critic).
The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - BalancedTransactionsCore, MemoryReqRes, B2B, MemActionLevel, noticeThe message group names and log level for the Balanced analysis level,
The last parameter must be a valid log level name (debug, info, notice, warn. error, critic).
The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - More DataTransactionsCore, MemoryReqRes, B2B, MemActionLevel, ReqPayloadSize, ExtLatency, infoThe message group names and log level for the More Data analysis level,
The last parameter must be a valid log level name (debug, info, notice, warn. error, critic).
The values must be comma separated, lower, upper or mixed case are allowed.
Transaction Analysis Level - Max DataTransactionsCore, MemoryReqRes, B2B, MemActionLevel, ReqPayloadSize, ExtLatency, Sidecalls, infoThe message group names and log level for the Max Data analysis level,
The last parameter must be a valid log level name (debug, info, notice, warn. error, critic).
The values must be comma separated, lower, upper or mixed case are allowed.

Size of next/previous transaction results

TransactionsdefaultThe size of next/previous transaction results.
The default is the size of the transactions list page from where the user clicked on the transaction ID link.

Miscellaneous Parameters

The following parameters control various other functions.

Parameter

Category

Default Value

Description

Enable agents management

Agents

true

Set to true, unless using an External Self Service Console installation, in which case it should be false.

Time to Keep WS-M Payloads (1d, 1w, blank)WSM(blank)Automatically delete WS-M payloads from store, possible values are 1d = one day, 1w = one week, no value = don't delete automatically

System Parameters

ParameterCategoryDefault ValueDescription
Is Internal Self Service InstallationSystemtrueIs the current DPOD installation an Internal Self Service Console - change this value only for external self service console scenarion
Internal Self Service AddressSystemhttps://montier-managementThe address of the internal Self Service Console - change this value only for external self service console scenarion
Internal Self Service Webserver PortSystem443The port of the internal Self Service Console - change this value only for external self service console scenarion
Threshold in days to Clean HATS Task Execution TableSystem7Threshold in days to cleanup HATS Task execution DB table
Threshold in MB to Clean HATS Task Execution TableSystem100Threshold in MB to cleanup the HATS Task execution DB table
Threshold in MB to Clean Reports Execution TableSystem100Threshold in MB to cleanup the reports execution DB table
Threshold in days to Clean Reports Execution TableSystem30Threshold in days to cleanup the reports execution DB table
Threshold in MB to Clean Alerts Execution TableSystem200Threshold in MB to cleanup the alerts execution DB table
Threshold in days to Clean Alerts Execution TableSystem30Threshold in days to cleanup the alerts execution DB table
Threshold in MB to Clean Services Portal Execution TableSystem100Threshold in MB to cleanup the services portal execution DB table
Threshold in MB to Clean Maintenance Plan ExecutionSystem100Threshold in MB to cleanup the maintenance execution DB tables (backup, sync and firmware upgrade)
External Path for Customization Scripts and FilesSystem/app/custom
The HTTP Address of the UISystem(no default)The URL used to access DPOD Web Console root context, e.g. https://dpod.example.com (without /op or /admin suffixes). This URL will be used to create URLs to DPOD Web Console that are embedded in emails sent by maintenance plans or sharing by email from the Web Console.
The HTTP Address of the UI - External (optional)System(no default)The URL used to access DPOD Web Console root context from external networks, e.g. https://dpod.example.com (without /op or /admin suffixes). If this URL if specified, an additional link will be added to email addresses where "The HTTP Address of the UI" is used, to allow external users to have an additional link they can use instead of the internal link.
Experimental FeaturesExperimental(no default)For support use only, do not change unless advised by L2/L3 support 

IBM DataPower Operations Dashboard (DPOD) v1.0.16.0