Technology Preview - includes new components that are NOT within support yet and might be deprecated in the near future

Become Supported - includes existing components / features that are now within support

Deprecated - includes components / features that are going to be removed from the product (or support) in the near feature

Release Notes 1.0.11.0

New Features

Component	Issue	Description
Correlated Transactions Tab	MNTR-3309 MNTR-3266 MNTR-3427 MNTR-3449	New tab in the transaction drill-down page, showing a list of all other transactions with the same global transaction ID. The list shows both APIC and Gateway transactions.
Raw Messages over Time Dashboard	MNTR-1852 MNTR-3423	Show amount of raw messages over time. Show total amount of raw messages grouped by message codes.
Reports and Alerts	MNTR-3325	New Alert - API Error Message Count Alert.
Reports and Alerts	MNTR-3347 MNTR-3314	New Alert - Trans. Over 30 sec by Service Name Alert.
Reports and Alerts	MNTR-3237	New Alert - Unavailable Devices Alert.
Reports and Alerts	MNTR-3087	New Report - Top Transactions Count per Interval.
Reports and Alerts	MNTR-3087	New Report - Top Documents Count per Interval.
Reports and Alerts	MNTR-3440	New Report - Top Documents Count per Agent per Interval.
Reports and Alerts	MNTR-3013	New Report - Service Latency Report - Extended.
Reports and Alerts	MNTR-3426	New Report - Service and URI Total Transactions Report.
User preference	MNTR-3316	New user preference to enable dependency between device, domain and service filters.
Failed Objects	MNTR-3311	Add GatewayPeering object to the list of monitored objects.
System	MNTR-3105	Added support for Microsoft Edge Chromium.
System	MNTR-3372	Added support for Gateway/APIC v10.
Internal Health	MNTR-3406	Added an internal alert when restart sampling isn't working.

Fix List

Component	Issue	Description
Security	MNTR-2934	Prevent XSS.
Security	MNTR-3315 MNTR-3430 MNTR-2744 MNTR-3443 MNTR-3447 MNTR-3461 MNTR-3341	Upgrade jquery to 3.5.1 and jquery-ui to 1.12.1. Upgraded TomEE server to 8.0.2. Upgraded Java to OpenJDK 11.0.8+10. Upgraded ElasticSearch to 6.8.11. Upgraded HTTPD to 2.4.6-93. Upgraded openSSL to 1.1.0k. Upgraded CentOS to 7.8.
Stability	MNTR-3037	Service configuration fails for services with a large amount of WSDLs.
Stability	MNTR-3432	Syslog message can't be parsed when URI contains curly brackets.
Stability	MNTR-3209 MNTR-3370	Added timeouts for SOMA requests to the gateways.
Stability	MNTR-3429	Excessive memory usage in SOMA requests caused Out Of Memory error.
Stability	MNTR-3359 MNTR-3317 MNTR-2812 MNTR-3058 MNTR-3343 MNTR-3364 MNTR-3308 MNTR-3357 MNTR-3328 MNTR-3411 MNTR-3337 MNTR-3368 MNTR-3412 MNTR-3383 MNTR-3465	Internal stability fixes.
Performance	MNTR-3437 MNTR-3321 MNTR-3418	Improved Retention queries performance. Delete empty indices that are not in use in the retention. Reduced number of collected logs for APIC v5/DataPower Gateway transactions.
Installation	MNTR-3191	DPOD upgrade fails because of /etc/yum.repos.d.
Installation	MNTR-1154	Uninstall does not remove logo rpm in CEF.
Firmware Upgrade	MNTR-1451	Firmware upgrade fails when IDG user is non-admin.
Syslog Agent	MNTR-3336	Supporting 3k Syslog messages.
LDAP	MNTR-2778	LDAP builtin role mapping doesn't allow reuse of values.
LDAP	MNTR-3069	LDAP disconnections cause first authentication to fail.
Custom Transaction	MNTR-3117	When a user specifies "customIsError" in the XSLT, there is an errorr in the Syslog agent and Service Activity Dashboard doesn't show data.
UI	MNTR-3345	Error message displayed when alert query does not contain a specific field.
UI	MNTR-3355 MNTR-3405 MNTR-3403	Display correct client IP and GTID for transactions. Minor changes to APIC transaction details page.
UI	MNTR-3327	The "security.limit.admin.ip" config didn't work as expected.
UI	MNTR-3238	Filtering expired certificates by domain doesn't work.
UI	MNTR-3363	Navigating to unauthorized page results in a blank page.
UI	MNTR-3365	Adding a report with duplicate name throws an error.
UI	MNTR-3369	When the gateway is down, show a meaningful message.
UI	MNTR-3362	When creating a user, the password validation message highlights the wrong field.
UI	MNTR-3261	When there are a lot of agents, the top of the dropdown is hidden.
UI	MNTR-3413	Reset filters when navigating from the transaction details page to the transactions list.
Internal Health	MNTR-3330	Misconfigured log target internal alert wrong when monitoring transactions in default domain.
Internal Health	MNTR-3371	Show only one misconfigured logtarget alert per domain.
API Connect Integration	MNTR-3375 MNTR-3415	APIC transactions status is solely determined by their front-end response code.
API Connect Integration	MNTR-3420	API Gateway mode - Payload is not available when there is only payload for the request or the response.
API Connect Integration	MNTR-3421	Showing a meaningful message when payload exists but cannot be displayed, or when the payload is empty.
API Connect Integration	MNTR-2979	HTTP method was wrong.
API Connect Integration	MNTR-3407	Datapower Gateway mode - Gateway type is N\A.
API Connect Integration	MNTR-3376 MNTR-3400 MNTR-3453 MNTR-3450	Fixed bugs and improved detection of side-calls.
API Connect Integration	MNTR-3353 MNTR-3384 MNTR-3385	Fixed bugs and improved detection of front-end response code.
API Connect Integration	MNTR-3448 MNTR-3467	Using policy type when title is not set.
API Connect Integration	MNTR-3445	Mismatch of successful APIs and activity by API name numbers in Recent Activity.
API Connect Integration	MNTR-3446	No data for DataPower API Gateway transactions in Recent Activity in Gateway view.
API Connect Integration	MNTR-3386 MNTR-3428	Unable to see transaction when URL is long.
API Connect Integration	MNTR-3404	API Gateway mode - distinguish between pre and post processing within the flow diagram.

Release Notes 1.0.10.1

Fix List

Component	Issue	Description
Security	MNTR-2759 MNTR-2760 MNTR-2765 MNTR-2768 MNTR-2769 MNTR-2770 MNTR-2772 MNTR-2777 MNTR-2779 MNTR-2780 MNTR-2781 MNTR-2791 MNTR-2798	Deprecated SSH cryptographic settings, HTTP security header not detected, vulnerable Javascript library (CVE-2019-11358, CVE-2015-9251)

Release Notes 1.0.10.0

New Features

Component	Issue	Description
API Connect Integration Improvements	MNTR-2377	Support for DataPower API Gateway.
API Connect Integration Improvements	MNTR-2686	Extended transactions page now shows API Connect transactions (when extended transactions are enabled).
API Connect Integration Improvements	MNTR-1844	Reworked API Connect transaction drill-down page to show more accurate transaction flow and latency information.
LDAP Integration	MNTR-2304	Improved integration with LDAP to allow more flexibility and simplicity in the LDAP registry configuration.
LDAP Integration	MNTR-1751	Better support for secure LDAP (LDAPS) using TLSv1.2 and host name verifier.
Objects Down Monitor	MNTR-2714	Enabled but Down list of monitoring classes' can now be altered via a system parameter.
Reports and Alerts	MNTR-2158	New report - latency statistics grouped by gateway/domain/service name.
Reports and Alerts	MNTR-2641	Support TLSv1.2 for SMTP with STARTTLS
UI	MNTR-2662	New Device Information panel under Manage→Gateways, showing summarized information about the gateway, such as firmware level and device type

Fix List

Component	Issue	Description
API Connect Integration Improvements	MNTR-1841	API Policies dashboard are now sorted by API Name + Policy Name + Version
API Connect Integration Improvements	MNTR-2377	API Connect URI and URL calls dashboards can now be filtered by API attributes.
Objects Down Monitor	MNTR-2705	Speed up the Objects Monitor sampling
Support for IDG 2018	MNTR-2275	SOMA messages containing errors where not parsed correctly for IDG 2018.4.1.X
Support for IDG 2018	MNTR-2273	Some DPOD functionality, such as backup and DevOps portal operations, failed on IDG 2018.1.6
Restart Analysis	MNTR-1906	Out of memory when reading audit log files. Added support for reading more than 3 audit log file generations.
Syslog Agents	MNTR-2154 MNTR-2587	Extended latency message was not parsed correctly in some cases.
UI	MNTR-2695	Add "Copy to Clipboard" button to the Manage->Debug Log page
UI	MNTR-2722	Reworked EULA/License page
General	MNTR-2177	Remove ES deprecation warnings from the UI and reports servers
DPOD Admin Interface	MNTR-2653	AppAdmin fails to parse available services when the customer has a custom message in /etc/profile
Documentation	MNTR-1921	Better documentation for the Cell environment upgrade process
Stability	MNTR-1388	Show an internal alert if DPOD's log targets are not configured correctly.
Security	MNTR-2711	Upgraded CentOS to 7.7
Security	MNTR-2591	Upgraded TomEE server to 8.0.0 Upgraded Java to OpenJDK 11.0.5+10
Security	MNTR-2243	Upgraded ElasticSearch to 6.8.1

Release Notes 1.0.9.0

New Features

Component	Issue	Description
Appliance Migration Wizard	MNTR-1903 MNTR-1910	A step by step wizard to backup and restore configuration between gateways. The wizard backs up a source gateway, performs validation on both source and target, and restore the backup to the target gateway.
Services Configuration Changes Analysis	MNTR-1849 MNTR-1850 MNTR-1929	A new dashboard showing all recent configuration changes for a service and a latency or number of errors around the time of change thus assisting to evaluate the run-time effect of change. The transaction drill-down page shows whether a recent configuration change was made.
Reports and Alerts History Portal	MNTR-1793	A new portal for reports and alerts executions that allows you to view past alerts or reports or even download reports.
Reports and Alerts Improvements	MNTR-1411	More filter types are now available for API Connect reports and alerts, as reports and alerts are now bound to a product (Gateway or API Connect).
Reports and Alerts Improvements	MNTR-1771	New alert and system health metric for monitoring MQ Connection Utilization
Reports and Alerts Improvements	MNTR-862	New alert for monitoring services that did not run in the last X minutes.
Reports and Alerts Improvements	MNTR-1955	New alert for monitoring API Connect transactions that ended with a specific HTTP status code
Reports and Alerts Improvements	MNTR-2158	Added a new Transactions Latency Statistics report.
API Connect Integration Improvements	MNTR-1843	Added context variable capturing to the policy variables capture
API Connect Integration Improvements	MNTR-859 MNTR-1673 MNTR-1791 MNTR-1820 MNTR-1827	Handle more cases of early failed transactions (OAuth, 403, etc) Improved error analysis Improved payload recording
New DPOD Admin Interface	MNTR-1927 MNTR-1236 MNTR-1831	Most of DPOD's admin functionality, such as stopping or starting DPOD's services, is available through a new Web UI
New Gateway MQ Objects Dashboard	MNTR-1771	A new dashboard that shows Gateway's MQ objects stats such as number of idle and active connections
Support for IDG 2018	MNTR-1768	Support sync and firmware upgrade for IDG 2018.x firmwares
REST API	MNTR-1909	New REST API for updating gateway's details

Fix List

Component	Issue	Description
Syslog agents	MNTR-1774	Fix - removed or disabled log targets are reconfigured and enabled when setting up syslogs again
Transactions Dashboard	MNTR-2154	Transactions with non-standard Global Transaction ID are not showing correctly in the transaction drilldown page
Transactions Dashboard	MNTR-2085	Fix a problem with parsing and showing WSProxy URIs that contain plus signs
Transactions Dashboard	MNTR-1968	Fix - some transactions stay in Inprocess status when analysis level is Max TPS
API Connect Integration	MNTR-1692	Add HTTP FE response code to API-C total transactions report
UI	MNTR-1773	Show "Gateway" instead of "IDG" in the top menu product view selection
UI	MNTR-1714	Charts and graphs are now more accurate
UI	MNTR-1836	Transaction page - remove duplicate errors from error analysis
UI	MNTR-1785	Favorite filters display shows current filters instead of saved ones in the description
UI	MNTR-1718	Buttons in maintenance screens are not visible on low screen resolutions
UI	MNTR-1821	Filters does not work in the extended transactions page
UI	MNTR-1871	In change audit - the "time" title is not "time sampled"
UI	MNTR-1916	Autocomplete filter not updating when selecting the last value in multi-select
UI	MNTR-1437	Fix wrong wording on system parameter name
UI	MNTR-1454	Fix - don't change product view in the Transaction Debug Log/Purge pages
UI	MNTR-1642	Favorite filters should not save product view parameter
UI	MNTR-1745	"Theme" system parameter options should include the "Elegant" theme
UI	MNTR-1762	In API Connect transaction page, show "No Data" when no data exists
UI	MNTR-1838	Allow text selection for the JSON field in built-in reports/alerts edit page
LDAP	MNTR-854	When using LDAP with group properties for roles, adding a custom role to a group did not work
LDAP	MNTR-1901	Better Handling of DNs with commas and parentheses in the UI and utilities
Reports and Alerts	MNTR-1812	System error report did not show the error message
Reports and Alerts	MNTR-1721	Objects Down alert should have the object name in the alert subject
Reports and Alerts	MNTR-1912	Alerts created from the Service URI/URL calls pages are missing the index fields and document type fields
Reports and Alerts	MNTR-1817	Fix a bug in alert's equal and non-equal comparators
Maintenance	MNTR-1825	Long running maintenance sync tasks were not always canceled automatically
Maintenance	MNTR-1937	Backup tasks support longer lists of domains
Installation	MNTR-1795	Added more validations to federation installation scripts
Installation	MNTR-1896	Allow to create a cell environment on virtual platforms
Installation	MNTR-1899	Better free space checking before starting DPOD update
Stability	MNTR-1882	Upgrade ElasticSearch to 6.6
Stability	MNTR-1601 MNTR-1697 MNTR-1730 MNTR-1775 MNTR-1815 MNTR-1816 MNTR-1894 MNTR-1932	Internal stability fixes
Stability	MNTR-1826	Changed database compression logic to prevent issues with bloated database size
Security	MNTR-1102	Upgrade Java to OpenJDK 11.0.2
Documentation	MNTR-1777 MNTR-1921	Added more documentation about delivery options for reports. Better documentation of Cell environment upgrade.

Release Notes 1.0.8.6

New Features

Component	Issue	Description
Custom Dashboards	MNTR-1694 MNTR-1741	Admins can design custom dashboards containing DPOD widgets. Custom dashboards are available to all users from the Dashboards menu.
API Connect Integration	MNTR-1698 MNTR-1705 MNTR-1710 MNTR-1716	New option to trace and view policy variables for specific API Connect transactions (by Catalog and API Name).
API Connect Integration	MNTR-1707	Improved API Connect side calls analysis.
Monitoring	MNTR-1701	Support for monitoring transactions in the default domain.
Management	MNTR-1534	When removing a monitored device from DPOD - all DPOD's log targets can be removed from the monitored device.

Fix List

Component	Issue	Description
UI	MNTR-1702	Fix column width in API Connect HTTP Response Codes Count chart
UI	MNTR-1581	Page is scrolled back all the way up when navigation occurs
UI	MNTR-1744	Old deprecated Extended Transaction setup buttons are collapsed and not visible by default
UI	MNTR-1757	Restarts dashboard Domain filter fix
API Connect Integration	MNTR-1761	Early Failed grid shows empty Client ID field
System	MNTR-1726	Fix an issue where multiple indices were created for DPOD's static data - CRITICAL
APM Integration	MNTR-1738	Provide external links for APM
Cell Environment	MNTR-1706	Fixes for the cell configuration utility
LDAP	MNTR-1736	Better LDAP error messages
LDAP	MNTR-1746	LDAPS fails if the certificate CN does not match host name
Security	MNTR-1739	Updated Java to 8u192
Stability	MNTR-538	Add additional GC logs in Flume agents

Release Notes 1.0.8.5

New Features

Component	Issue	Description
API Connect Integration	MNTR-1638 MNTR-1640 MNTR-1643 MNTR-1644 MNTR-1646 MNTR-1647 MNTR-1666 MNTR-1682	Many new dashboards in the API-C product view, including APIs activity, latency, HTTP response codes and consumers.
API Connect Integration	MNTR-1645	New dashboard for comparing latency between API versions.
API Connect Integration	MNTR-1648	New dashboard for comparing API assembly policies between APIs or versions.
API Connect Integration	MNTR-1117 MNTR-1636 MNTR-1637 MNTR-1668 MNTR-1670 MNTR-1674	Several filters have been added to API-C pages with auto-complete, such as catalog, space, product, plan, API name, API version and consumer application name.
API Connect Integration	MNTR-1452	Analyze API Connect Early Failed Transactions
Cell Environment	MNTR-1532	DPOD's processing can now be distributed across different federated servers in order to handle high transaction loads (thousands of tx per second)
DevOps Services Portal	MNTR-1512	New functionality to import service into multiple devices
DevOps Services Portal	MNTR-1091	New functionality to read custom JSON from the service comment and populate a searchable description in DPOD's Services portal page
B2B	MNTR-1365	Raw messages can now be filtered by From/To B2B Partner Profiles
Reports and Alerts	MNTR-1549	Reports and alerts' JSON can have named parameters
UI	MNTR-1104	Add "Yesterday", "Last Week" and "Last Month" to dashboards and reports time filter
UI	MNTR-1641	New "Elegant" UI theme

Fix List

Component	Issue	Description
Reports	MNTR-1497 MNTR-1549	New reports on average service latency, average request size and services above specific elapsed time
Reports	MNTR-1680	Domain Request Size report shows wrong value in the "Transactions Count" column
Alerts	MNTR-1465	New alert on message code count that exceeds a threshold value
UI	MNTR-1620 MNTR-1662	Add request and response sizes to transactions list and transaction details pages
UI	MNTR-1526	Keep Device and Domain filter selections when navigation through the System Health dashboard
UI	MNTR-1465	In the System Health dashboard - the "Devices Memory" analyze link should open the Device Resources dashboard
UI	MNTR-1516	Tx with Probes dashboard - measured units are now "Policy Rules" instead of "Number of Transactions"
UI	MNTR-1459	Show correct latency analysis for some XML Firewall services
UI	MNTR-1296	Add a warning when removing Device Resources sampling from a monitored device
UI	MNTR-2139	The Time Picker widget is sometimes hidden by the top menu bar
Syslog Agents	MNTR-1551	Show correct time for syslogs coming from a timezone different than DPOD/user browser
Auto Setup Domains	MNTR-1377	When automatically setting up a domain that was reset - use its original analysis level
Maintenance Plan	MNTR-1431	Backup, Sync and Firmware upgrade plans can now be canceled before they start to execute Stop all scheduled executions after a maintenance plan was deleted
API Connect Integration	MNTR-1206	API Connect reports and alerts - filters does not work
API Connect Integration	MNTR-1523	Empty API names are now shown as "Unknown" instead of a blank name, so they can be searched
API Connect Integration	MNTR-1525	UI shows an error for some API Connect transactions
Security	MNTR-1509	Non-admin users can no longer view the internal alerts page
Security	MNTR-1320 MNTR-1476 MNTR-1475 MNTR-1477 MNTR-1514 MNTR-1521 MNTR-1528 MNTR-1530 MNTR-1583	Upgrade ES to 5.6
APM Integration	MNTR-1361 MNTR-1372 MNTR-1436 MNTR-1453	Improved stability
Stability	MNTR-1574 MNTR-1555 MNTR-1591	Fix internal metadata rebuilds errors
Stability	MNTR-1569	Don't use internal metadata if it is more than one hour old
Stability	MNTR-1566	Rotate GC logs after 5 generations to save disk space
Stability	MNTR-1554	Add channel utilization and free memory graphs to syslog and WS-M agents drill-down pages
Stability	MNTR-1331	Print error UUID in the logs for failed internal alert publishing
Performance	MNTR-1681	Reduced the size of the stored messages

Release Notes 1.0.8.0

New Features

Component	Issue	Description
Non Intrusive Extended TX	MNTR-1271 MNTR-1279 MNTR-894	Extended Transactions, which are transactions that span more than one monitored devices/services, are now being tracked in a non-intrusive way over HTTP protocol, without the need for processing policy instrumentation. This feature is not enabled on systems upgraded to version v1.0.8.0 from older versions. The pre v1.0.8 intrusive Extended Transaction functionality will be deprecated in the near future
APM Integration	MNTR-1304 MNTR-1266	Provide built-on TCP connector to Splunk, provide DPOD application for Splunk as implementation reference.
System Health	MNTR-1248 MNTR-1232 MNTR-1235 MNTR-1237 MNTR-1243 MNTR-1273 MNTR-1295 MNTR-1300	An overall health overview for all gateways according to user defined metrics. Drill-down to view the device's health in the last 60 minutes
System	MNTR-310	Fixes for DataPower Firmware Level 7.7 Support for API Connect version 2018.04
Privacy Tool	MNTR-1140	Added an option to disable local user repository (since DPOD v1.0.7.1)
Privacy Tool	MNTR-1146	Added an option to automatically delete WS-M payloads after a day or a week
Privacy Tool	MNTR-1177	New admin page for deleting DPOD logs of a specific transaction
UI	MNTR-906 MNTR-1195	All dashboards can now be exported to CSV
UI	MNTR-1057 MNTR-1205 MNTR-1229	Domain filter now support asterisk wildcard
Performance	MNTR-1110 MNTR-1240	User can choose between supporting more TPS but gathering less data per transaction, or collecting more data and supporting less TPS. This option is available during log target setup.
DevOps Services Portal	MNTR-1227	New functionality to stop or start a service based on custom role permissions
Alerts	MNTR-1269	New alert on Ethernet interfaces Tx/Rx Errors
Alerts	MNTR-1312	New alert on device restart/reload
API Connect Integration	MNTR-1103	Add API Connect fields to DPOD custom roles - API Name, Catalog Name, Space Name, Plan Name, Product Name, Consumer Org Name, Client ID
API Connect Integration	MNTR-1075	Let the user choose the default API Connect homepage
API Connect Integration	MNTR-1099	New alert - more than 5 APIs with latency above X ms.
API Connect Integration	MNTR-1164	Service URL/URI Calls dashboards are now available in API Connect view.
API Connect Integration	MNTR-1290	New filters in the transactions page for Product Name and Consumer Org Name
Internal Health	MNTR-1089	Provide retry functionality for failed publishing via SMTP or syslog of alerts, internal health and maintenance jobs
Device Resources	MNTR-1231	Device Resources page now shows Ethernet Interfaces statistic graphs
REST API	MNTR-1274	New REST API to create WS-M subscriptions
REST API	MNTR-943	New REST API for executing reports

Fix List

Component	Issue	Description
API Connect Integration	MNTR-1206	API Connect reports and alerts - filters does not work
API Connect Integration	MNTR-1247	Mark web-api transactions as internal transactions so they won't show when filtering successful transactions
API Connect Integration	MNTR-955	Change "OAuth Valid From" and "OAuth Valid Until" filters to time picker
API Connect Integration	MNTR-1149	Transaction details page - policy graph - Mark the apim.security policy as internal policy and not user policy
API Connect Integration	MNTR-1138	Auto Setup Domains - domains are setup again in DPOD when no logging target stats exists
Store Retention	MNTR-1053	Handle closed ES indices correctly
UI	MNTR-1207	False warning about device locale not set to EN
UI	MNTR-1121	Product View button sometimes doesn't respond
UI	MNTR-179	When navigating between raw messages and transactions page - copy the service name filter to the object name filter
UI	MNTR-773	Schedule expression should not accept two asterisks in a row
UI	MNTR-1185	Monitored devices settings tab - domains filter is not working properly
UI	MNTR-1202	Minor changes to dark theme colors
UI	MNTR-1051	When user is not allowed to see raw messages and payloads, the transaction page should focus on the ext latency tab
UI	MNTR-1135	Device Management → Settings → Temp domain filter should be dependent on the device filter
UI	MNTR-1155	Early Failed dashboard - font size is different than other dashboards
UI	MNTR-998	Reports page new look
Maintenance - Sync	MNTR-1199	Domain Sync doesn't always exclude DPOD's log targets
DevOps Services Portal	MNTR-1137	When using external self service portal, the DevOps portal executions page does not honor custom roles
DevOps Services Portal	MNTR-1133	Add System parameter for setting local WSDL upload size limit
Device Resources	MNTR-1244	Domain restart is not identified in some cases
Device Resources	MNTR-1245	Device Resources fails when sampling Docker resources
APM Integration	MNTR-1268	Add gtid parameter to transaction page
Alerts	MNTR-1284	Empty Email sometimes being sent when alert finished with no results
Alerts / Reports	MNTR-1015	Service filter does not always work
Alerts / Reports	MNTR-1196	Various reports and alerts definition fixes
Reports	MNTR-1119	White Space in report filters may cause wrong results.
Reports	MNTR-648	Empty ES Headers field in report setup causes an exception to be printed to the logs
Performance	MNTR-1283	Alerts and Reports should use internal indices metadata
Performance	MNTR-1261	Prepare for future ES upgrade
Performance	MNTR-1127 MNTR-525 MNTR-968 MNTR-1122 MNTR-1213 MNTR-1126	Improving internal database performance and stability Applying O/S performance profile Include performance monitoring tool Delete old database records if the database size reaches a certain configurable threshold
Security	MNTR-1043 MNTR-1024 MNTR-1025	Upgraded openSSL 1.1.0g to 1.1.0h (appliance installation only) Upgraded openSSH to 7.4 (appliance installation only) Upgraded httpd version to 2.4.6.67 (appliance installation only)
Security	MNTR-1272	Add audit logger to UI service
Install	MNTR-1134	Upgrade OS to CentOS 7.4 (appliance installation only)
Install	MNTR-869	Fix bug in product removal
Stability	MNTR-983 MNTR-1233	Limit dynamic port allocation range Improving product stability

Release Notes 1.0.7.0

New Features

Component	Issue	Description
UI - Transaction Dashboards	MNTR-1067	DataPower and API Connect transactions lists may be exported to a CSV file (applicable for Firefox 57+ and Chrome latest version only)
Maintenance Plan - Firmware Upgrade	MNTR-895	Add Firmware upgrade plan (virtual and physical) Requires firmware 7.5+
Payload Capture	MNTR-865	Payload capture can be enabled on multiple devices or domains at once
Tenant Support	MNTR-896	Added the ability to monitor transactions' information on appliance with Tenants
API-C Integration	MNTR-1036	The Early Failing Requests Dashboard in now also available in API Connect view
API-C Integration	MNTR-1038	New API Connect Recent Activity dashboard that displays a high-level overview of APIs activity
Reports	MNTR-982	New URI Summary Latency report New URI Detailed Latency Report
UI - APIs	MNTR-995 MNTR-996	Added latency percentile data to Service URL/URI Calls dashboards. Add a menu item that allows to create a new latency alerts based on percentile.
UI	MNTR-1037	Columns can be hidden or reordered in the Transactions, Raw Messages and API Connect Transactions pages
UI	MNTR-1014	The transaction error analysis now indicates whether a probe was enabled during its execution
UI	MNTR-731	New widget for generating schedule expressions (for scheduling reports, alerts and appliance maintenance plans)
Devops	MNTR-1030	Support automation of domains configuration in DPOD for domains that were previously configured but were reset by API-C or by Admins
Internal Health Alerts	MNTR-597 MNTR-938	New Internal Monitoring page that shows DPOD's components status and recent alerts to assist monitoring DPOD internal health. Add Internal Alerts to user notifications widget
Install / Security	MNTR-1136	Add Support for user supplied (pre installed) CentOS 7.4.0 / RHEL 7.4.0 OS when installing the product in a Non Appliance mode.
Security	MNTR-1140/1	Add ability to disable management of local user registries for better security regulations requirements compliance.

Fix List

Component	Issue	Description
UI	MNTR-468	Agents page - the message column is too narrow Reports/Alerts view page - the schedule column is too narrow
UI	MNTR-992	Show which view is selected (IDG or API Connect)
UI	MNTR-993	When using auto refresh, the time filter is showing incorrect time
UI	MNTR-640	In Add/Edit device page - a validation of IPV4/IPV6 was added to the log target source address input In Node edit page - a validation of IPV4/IPV6 was added the IP address input
UI	MNTR-701	The top navigation bar is not displayed correctly for small screen resolutions
UI	MNTR-1029	A message was added to agent page when the monitored device's time is later than DPOD's agent time
UI	MNTR-1042	Service URI/URL dashboards shows only the first 10 results while more exists.
UI	MNTR-521	Limit the number of displayed raw messages per transaction to 2500 as it was causing some browsers to hang
UI	MNTR-924	XML Firewall service transactions do not appear in the transactions page for monitored devices with firmware 7.6
UI - Filters	MNTR-961	On Transaction List page, the combination of Domain and Payload filters does not work (fixed for IDG 7.6+)
UI - Filters	MNTR-853	Domain filter shows duplicate domain names
UI - Filters	MNTR-871	Add URI Filter to Service URL Calls dashboard
UI - Filters	MNTR-919	Favorite filters widget - a missing confirmation dialog was added before deleting a saved filter
UI - Free text search filter	MNTR-936	In logical transaction mode, a missing free text filter was added to Transactions List page
REST API	MNTR-776	Device REST API - correct prefix was added to the agent names when adding a device
REST API	MNTR-815	Add new REST API calls to show all available Reports, Alerts and Appliance Maintenance API calls
DevOps Services Portal	MNTR-945	Allow to setup a separate temporary domain (for WSDL validation and promotion) for each device
DevOps Services Portal	MNTR-1023	Truncate error messages that are longer than 5000 characters
DevOps Services Portal	MNTR-1039	Errors while navigating to services list after DPOD starts
DevOps Services Portal	MNTR-1085	Allow access to DevOps services portal from external self-service DPOD installation
Payload Capture	MNTR-994	Show correct message when trying to start payload capture while the DataPower Web Services Management Agent is disabled
Maintenance Plans	MNTR-767	When scheduling a maintenance plan - show message to the user about entering Cron schedule expression 1 minute before the scheduled time
Maintenance Plans	MNTR-1010	Show the start time of each maintenance plan and task Replace the email recipient widget in the plan edit page with a newer widget
Maintenance Plans - Backup	MNTR-910	When backup could not access the device, show a meaningful message instead of "No Domains Found"
Maintenance Plans - Sync	MNTR-765	Sync activity edit page - keep user selection of the sync activity type, do not change "Specific Domain" to "Domain by Pattern"
Maintenance Plans - Sync	MNTR-‎1098	In some cases DPOD may remove password map aliases during sync
Restart Analysis	MNTR-691	Get monitored devices' audit logs as binary files and not text files
UI	MNTR-1003	When drilling down to the transaction details in the Early Failed dashboard, highlight the early failed tab and generate correct breadcrumbs
UI	MNTR-1011	Show store status message with the earliest stored syslog document to administrators
UI	MNTR-1034	Raw messages page - replace the Global Transaction ID column with Message Code column
UI	MNTR-446	Cron schedule expression - Don't allow * value for seconds
UI	MNTR-833	Device resource agent page - number format exception
UI	MNTR-923	Dropped Syslog Messages graph - show curve instead of spikes when zomming in
UI	MNTR-942	Use a newer email recepient widget instead of the old one in the alerts and maintenance plans pages
UI	MNTR-978	Monitored device setup page - For monitored devices with no domains, the "Domains syslog status" button should be disabled
UI	MNTR-997	The sidebar arrow sometimes doesn't disappear
UI	MNTR-1005	Internal Health → Agents page - Resources agent should not show Red status if there are no monitored devices
UI	MNTR-1019	When showing endpoints in the mange devices page, there is an error when showing B2BGW endpoints
UI	MNTR-134	Add paging to security dashboards
Performance / Security	MNTR-1026 MNTR-1047 MNTR-1050 MNTR-1022	Upgraded Derby to 10.14.1.0 Upgraded TomEE to 1.7.5 Upgraded Java to 8u152 Upgraded openSSL 1.1.0f to 1.1.0g
Logical TX	MNTR-1061	Add ES Plugin installation for event forwarding to minimize manual steps
Developer Edition	MNTR-1052	Provide user notification on the use limit of days for DPOD Developer edition on Docker (7 days) and the existon OVA files for Developer Edition (30 days)
Alerts	MNTR-1122	Clean old records from internal configuration database when exceeds certain size

Release Notes 1.0.6.0

New Features

Component	Issue	Description
DevOps Services Portal	MNTR-885/889 MNTR-941/929 MNTR-852/879 MNTR-911	A new Services Portal displays a list of all traditional services of the monitored devices for developers self-service maintenance (a DevOps portal). The first 2 actions available for end users are refreshing remote or entirely local WSDLs, based on security policies (custom roles). The Refresh WSDL action will validate the new WSDL and schema files (for Local WSDL) or WSDL URL (for remote WSDL) to be validate and if valid, the action will let the user to promote the new version.
UI - Early failing requests dashboard	MNTR-944	Add a new dashboard for early failing requests (such as SSL failures) - Requires firmware 7.5.2.4+
UI - APIs dashboards	MNTR-912/891 MNTR-661/719	Add a new activity dashboard per service URI / API. Users can view the number of invocations and response time per URI or by service name.
UI - Filters	MNTR-861 MNTR-828 MNTR-829	Add multi-selection to applicable filters and add auto-complete for the Service filter. Add an ability to save favorite filters for later use. Add more values to time range filters: last 10 minutes, start of day, start of week, this month. Add validation for numeric type values in applicable filters.
UI - Free text search filter	MNTR-913	Add a free text search filter to the transactions list page where the user may enter a single value that will be searched across various data fields
UI - Sharing	MNTR-877	Add a new "Share" button that allows sharing the current page (including filters, transaction ID etc.) by copying/pasting the current URL or by sending it via email
UI - Notifications	MNTR-652	Add recent notifications panel that displays recent UI notifications for the user (not persisted)
UI - Charts	MNTR-827	Allow users to change the size of the series (number of values) that is displayed in charts of type "top N"
Install	MNTR-899	Provide procedure and tools for customers to migrate an existing DPOD Store data to a new DPOD installation (for the following scenarios: upgrading DPOD v1.0.0 or v1.0.1 CentOS, upgrading DPOD HW, moving from Appliance to Non-Appliance mode)

Fix List

Component	Issue	Description
UI	MNTR-703	Wrong object class name on "Failed objects" object filter
Config Sync	MNTR-908 MNTR-841	Add additional limitations to sync documentation Fix wrong URL in sync task completion email link
UI - APIs	MNTR-935	SFTP transactions stay in "INPROCESS" state
Integration	MNTR-926	Custom Transaction is not working properly with IDG FW 7.6.0.1
UI	MNTR-190	Consistent table drill-down and filter in transaction list screen
Security	MNTR-605 MNTR-855	Upgrade Java to 8u144 Update cURL and openSSL libraries (OpenSSL -> 1.1.0f, cURL -> 7.55.1) - For Appliance Mode installations only with CentOS 7.2+.
Security - LDAP	MNTR-656 MNTR-804 MNTR-878	Improve functionality of app_ldap_utilities.sh Improve LDAP traces
Management	MNTR-698 MNTR-736 MNTR-870 MNTR-939 MNTR-856	Enrich must-gather data collection
DR	MNTR-783	Add Script that calls DR REST API to set DPOD installation as a standby machine
Install	MNTR-819	Fix validation of NTP configuration
Security	MNTR-866	Add procedure for SSL client authentication to IDG XML management interface
UI	MNTR-867	Add minimum value of 10 seconds to auto_navigation_to_home.interval in user preferences
history Alerts	MNTR-907	Syslog_Errors_MessageCode alert does not find all message codes
UI	MNTR-915	After adding a device redirect the user to the setup tab
Management	MNTR-917	Add additional files to system backup and restore
UI	MNTR-642	Fix duplicate key exception while adding a new device and quickly navigating to the device panel

Release Notes 1.0.5.0

New Features

Component	Issue	Description
Maintenance Plan - Backup	MNTR-654 MNTR-693/5 MNTR-714 MNTR-737 MNTR-743/5/7 MNTR-762/3	Add backup plan (secure backup, domain / device export) Requires firmware 7.1+
Maintenance Plan - Sync	MNTR-664 MNTR-693/5 MNTR-714 MNTR-732/7/9 MNTR-740/1/2/4/5/7 MNTR-762/3/8 MNTR-774/6 MNTR-753	Add synchronization plan to synchronize device / domain configuration. Requires firmware 7.1+
API-C integration	MNTR-665/7 MNTR-711/2/3 MNTR-758/9 MNTR-601 MNTR-705/7 MNTR-785/9 MNTR-792	Add special view to search and analyze a transaction across two different perspectives, both adjusted to API-C or DataPower terms and metrics Requires API-C v5.0.7.2+
UI - Side Call Analysis	MNTR-52 MNTR-662 MNTR-724	Add detailed and summary views of latency inside a transaction when calls are done to WMQ, DB, LDAP or HTTP with openUrl . Requires firmware 7.6+
UI -B2B	MNTR-463	Add filter to search logs by message id or partner id
UI - APIs	MNTR-661 MNTR-719	Add new activity Dashboard per service URL / APIs. Users can view number of invocations and response time per URLs or only by service name
Logical Transaction	MNTR-734 MNTR-790 MNTR-624	Aggregate most of a transaction's information into a single flat record that can be used to save space, provide more history, export to an external analytics platform or integrate with other existing APM products Requires firmware 7.6+
APM Integration	MNTR-779	Export each logical transaction as a syslog record to support integrations with Enterprise APMs or Cloud based alert systems Requires firmware 7.6+
Install	MNTR-587 MNTR-749	Add environment name and Nodes screen to manage node in order to assist multi nodes installation. All agents will use the node host/ip. Support a single DataPower report to two separate DPOD installations.
Alerts	MNTR-780	Alerts are now fully supported (after being introduced in v1.0.2 as tech preview). New Alert added when a DP service has an error (as defined in DPOD: direction=error and severity=error exist in a transaction)
UI - Error Analysis	MNTR-191	Add about a dozen built-in common recommendations to assist with SSL issues in transactions.
Devops	MNTR-601 MNTR-704 MNTR-754	Support automation of new domains configuration in DPOD by setting a name prefix.
DR	MNTR-721 MNTR-761 MNTR-782 MNTR-657	Add support to Active/Standby mode with no history. Introduce 4 APIs and a step by step scenario procedure. Suitable for customers that can not replicate storage or do not have an Active / Passive software solution.
Reports	MNTR-778	New reports that export all sampled configurations per service
WS-M	MNTR-629	Add a new Dashboard for each WS-M Agent that shows statistics for dropped WS-M events. Requires firmware 7.5.2.4+

Fix List

Component	Issue	Description
Performance / Security	MNTR-403 MNTR-649	Upgraded ES to 2.4.4 Upgraded TomEE to 1.7.4
Performance	MNTR-660 MNTR-659 MNTR-699 MNTR-733	Removed Optimizer script introduced in (1.0.4) and implemented all its improvements as built inside the new ISO file / upgrade procedure.
Install	MNTR-432 MNTR-447 MNTR-668 MNTR-696 MNTR-727 MNTR-751	Developer Edition - version data is incorrect 1.02 ISO generated wrong string in version.txt installation failure for Non Appliance if kibana is not installed
Security	MNTR-658	When LDAP is enabled, built-in roles shouldn't display users and groups
Security	MNTR-708	LDAP not working with custom group attribute
Install	MNTR-723	License generation failed
Performance	MNTR-750	Under high load some syslog events might have a wrong time causing some transactions to stay in "In Process" state- CRITICAL
Install	MNTR-340	Different active MQ installations used the same path to persist messages
Alerts	MNTR-466	Minor UI defects
UI	MNTR-510	An MPGW transaction with invalid json request might not appear in the UI
UI	MNTR-511	Transaction not listed when message rejected by filter which is the first action
Config Sample	MNTR-490	Added a new filter (object type) to "enabled but down dashboard"
UI	MNTR-725	When a login is required again, the user is not directed to the same page they were on
UI	MNTR-729	Notify users to run removal scripts (as mentioned in documentation) to complete the removal of a monitored device from DPOD.
Alerts / Reports	MNTR-748 MNTR-755	Syslog / Email sender was not thread safe and caused unwanted behavior under load
UI	MNTR-769	Filter out Internal transactions (transactions the are lower than 1000 or like "webapi-internal") from the Transaction List panel. These transactions will be counted as transactions in dashboards
UI	MNTR-224	When a transaction failed on backend connection add the BE URL to the Error analysis summary.
Management	MNTR-823	Application services may fail if started using app-util and SSH session is terminated

Known Issues

Component	Issue	Description

Release Notes 1.0.4.0

New Features

Component	Issue	Description
Alerts	MNTR-589 MNTR-599 MNTR-598	Add new alert based on any Gateway syslog error code. Error code can be edited by user. Add new alerts to notify when 1000 transaction in the last 10 min ean with open probes. Add new alert to notify on Certificate that are going to be expired in the next 30 days and are already expired in the last 7 days - Daily alerts
HA	MNTR-586 MNTR-584	Add documentation to describe HA deployment options - See documentation. Change IP address for all registered DataPower Gateways' Log Target created by DPOD to send information to secondary DPOD installation.
Management	MNTR-118	DPOD installation configure with built-in user repository allows its users to change their own passwords.
Internal Health Alerts	MNTR-537 MNTR-633 MNTR-645 MNTR-641	Add internal health alert component. For more details read here.
Performance	MNTR-539 MNTR-578 MNTR-580 MNTR-581 MNTR-583	Improve DPOD performance to support up to 1500 TPS in one single dedicated server with specific HW configuration as described in Hardware and Software Requirements. To reach this level of capacity a special step is required when an Optimizer script must run after install.
B2B	MNTR-556	Show AS2 FSH in down objects but enabled Dashboards.
Install	MNTR-568 MNTR-553 MNTR-475	Support Docker containers for Developer Edition only - removed in v1.0.5. used for internal product development only
Presale	MNTR-596	Providing Sizing tool to run in customer device and gather statistics
Security	MNTR-590 MNTR-533 MNTR-612 MNTR-606	Provide assisting script to configure LDAP - LDAP Configuration Script.
WS-M Agent	MNTR-636	Limit payload capture size when collected by DP Gateway (default to 10MB) - requires firmware 7.5.2.4
UI	MNTR-557	Add a new API to add a monitored device to DPOD to assist integrate DPOD in a DevOps implementation.

Fix List

Component	Issue	Description
Performance	MNTR-577 MNTR-567 MNTR-534 MNTR-526 MNTR-535 MNTR-583	Store performance improvements
HA	MNTR-585	Sync Store and DB with new Attached Gateway after move from Primary to Secondary DPOD installation in Active/Passive Scenario
UI	MNTR-625 MNTR-635	Transaction with callable rule invocation might appear several times on Transaction List screen. Requires firmware 7.5.2.4
UI	MNTR-89	Add last /first buttons to transaction list (limited to 10K results).
Performance	MNTR-438	Static / Cache data was flushed under load causing temporary data loss
UI	MNTR-284	Filter internal DPOD keep alive message from Raw messages panels
Performance / Security	MNTR-252 MNTR-210	DPOD was upgraded to be compiled and run with Java 8 u121
Restart Analysis	MNTR-494	On an unexpected device restart the down time displayed is too long
UI	MNTR-189	Extended Latency tab moved to transaction page to support customer's with small resolution screens
UI	MNTR-297	Add validation of IPv4/IPv6 format to monitored device host and log target source address properties .
WS-M Agents	MNTR-528	Bind a WS-M agent to a domain was persisted.
Performance	MNTR-540	Static data on an index should be persist once index is no longer active.
Store Retention	MNTR-569 MNTR-639 MNTR-562 MNTR-613	Provide script to adjust store size after a change of capacity was performed to /data filesystem
Performance / Agents	MNTR-591 MNTR-593 MNTR-594 MNTR-567	Add cache to parsing patterns. Improved performance and logging for Interceptor. Improve logging to identify bottlenecks as they occurred.
UI	MNTR-572	Prevent Extended transaction to be configure on API-C domains
UI	MNTR-619 MNTR-199	Trim filters such device , domain to enhance user experience
Security UI	MNTR-294	Prevent deletion of the last user with administrative rights.
Performance	MNTR-622	Under high load some syslogs events might have a wrong time causing some transactions to stay in "In Process" state- CRITICAL
Performance / Agents	MNTR-623 MNTR-617 MNTR-632	Improve records order in Raw Messages inside a single Transaction screen based on a microsecond precision. Requires firmware 7.5.2.4
Security	MNTR-628	Add LDAP password encryption.
Sample Config	MNTR-630	Increase Object's Name size limit to support B2B object with long names.
UI	MNTR-482	MPGW HTTP GET transaction not displayed when "Process Messages Whose Body Is Empty" is off. Requires firmware 7.5.2.4
Alerts	MNTR-428	After executing an alert, the execution history record was not fully complete in Store.
Reports	MNTR-157	When the report has 0.0 - the value is left aligned in the cell
WS-M Agent	MNTR-527 MNTR-618	Fail processing WSM Payload with two backend-message elements
Install	MNTR-460	Fix documentation on how to add a second network card to DPOD as described at Scenario 2 : All-In-One with two network interfaces
UI	MNTR-456 MNTR-254	Improve error messages Improve logs
Install	MNTR-524 MNTR-536	Create REST API for registering WSM and SYSLOG agents. Add automation support for multi server topology.
UI / Agents	MNTR-5 MNTR-621	Transactions starting with MQ were not always displayed in Transaction lists.
Install	MNTR-547	Add documentation on how change the default agents port in AIO installation
Syslog Agents	MNTR-637 MNTR-641	When system reach its Store throughput capacity all new syslog request were blocked causing dropped events on Gateway syslog targets. Now this events will be discarded and an new counter and dashboard is added for each agents to manage this dropped events scenario.
Install	MNTR-325 MNTR-532 MNTR-561 MNTR-544	Improve must gather and process diagnostics

Release Notes 1.0.3.0

New Features

Component	Issue	Description
UI	MNTR-67	Allow non-admin users with an explicit custom role to start a WS-M subscription for a limited amount of time from the investigate menu.
Sample Config	MNTR-369	Added support for collecting service configuration data about B2B Gateway, B2B Partners and Partner Destination.
UI	MNTR-260	Added "request URL" to Transaction screen for REST/HTTP services.
UI / Reports	MNTR-188 MNTR-517	Provide Kibana 4.5.1 for user custom queries. Available from Internal Health .
Sample Config	MNTR-474 MNTR-501	Service change audit will show changes for all service attributes. Show configuration details of all the front-side handlers for MPGW services .
UI	MNTR-467	New dashboard to show all DataPower objects that are enabled but in op. state down.
Alerts	MNTR-493	Add a 4th alert type - "LIST" that sends an alert if a query result is in a predefined user list (whitelist or blacklist).

Fix List

Component	Issue	Description
Alerts	MNTR-417	Removed usage of alert internal id in the REST API.
UI	MNTR-367	In the Transaction details page - the payload tab should be focused if it's the only tab.
General	MNTR-465	Connect to ES as transport client failed.
Must gather	MNTR-447 MNTR-476	Add timeouts to store stats requests. Add version_history.txt file to must gather.
Install	MNTR-160	Add scripts to assist with product removal from DataPower Gateway.
UI	MNTR-471	Service with loopback shows as IN PROCESS in Transactions page.
Performance	MNTR-472 MNTR-484	Performance issue to get min/max of dates of documents in the store - CRITICAL.
Documentation	MNTR-480 MNTR-475	Update doc regarding MPGW WSM payload capture. Add to documentation kernel parameters best practice.
Reports	MNTR-481	Sending reports using SMTP failed to some MS Exchange customers.
Security	MNTR-474-3	Upgrade reports using SMTP to work by default with TLS. Existing customer will require to change port. Backward compatibility will require manual steps.
Install	MNTR-492	System startup failed in some cases and require manual restarting - CRITICAL.
UI	MNTR-495	XMLFirewall services don't show in Transactions Page.
Internal Health	MNTR-497	Under heavy load rolling an index can cause 1-4 seconds delay in data streaming.
Install	MNTR-498	Initial size allocation for transaction in store is small due to OS function response changes.
Reports	MNTR-500	Add default reports directory.
UI	MNTR-502	Cannot add monitored device that is configured to use TLSv1.2 in XML Management Interface.
Security Performance	MNTR-504	Upgrade all components to java 8u101.
Sample Config	MNTR-352	Add URI field to the service configuration table.
Sample Config	MNTR-326	Show the service user comments in the service configuration page.

Release Notes 1.0.2.0

New Features

Component	Issue	Description
UI / Security	MNTR-261	Add ability to restrict logins of a user with admin privilege to specific IP / subnet
UI	MNTR-197	Add global transaction id to filters in the Raw messages and Extended transactions screens.
Analytics	MNTR-6	Add a new dashboard that shows reboots/reloads of devices / domains and some other characteristics of the event.
UI Sample Config	MNTR-296	Add support for SSLProxy and TCPProxy Objects.
Internal Health	MNTR-178	New Internal Health Dashboard Provides information about Store Performance
UI	MNTR-336	DPOD Administrator is prevented from creating duplicate WS-M subscriptions.
Install	MNTR-333	Add a minimal configuration option to Standard Edition requiring only 16GB of Memory
WS-M Agent	MNTR-272	Capture JSON Payload from WS-M Events. (Requires IDG firmware 7.5.2)
Install	MNTR-229	Add Support to install the product in a Non Appliance mode on a Pre-installed fresh CentOS 7.2.0 / RHEL 7.2.0 (Current limitation: This can be achieved for the with a fresh install only. The upgrade procedure will not upgrade OS level)
New Alerts components	MNTR-9 MNTR-386	Technology Preview - provide alerts on Gateway's resources issues , Gateway's Objects in operational state down and system errors observed. Alerts can be pushed by syslog or emails but can also be pulled via REST APIs.
Custom Log as Logical Transaction	MNTR-16	Technology Preview - allow to send custom one record sysloc in a defined format that will be presented in some dashboards and supports customer own business name for service, custom partner identification and other custom fields.

Fix List

Component	Issue	Description
UI	MNTR-370	Add an alert to the user before invoking Extended Transaction configuration about its intrusive nature
UI	MNTR-48	Devices filter does not contain recently-added devices. Fix most common situations of known bug MNTR-175
REPORTS UI	MNTR-24	Trim inputs fields across UI screens.
Internal Health	MNTR-301	Enhance product must gather.
Reports	MNTR-155	Add a header to all reports that includes all the report's filters.
Reports	MNTR-154	Report headers will now contain actual time range instead of relational (e.g last hour) Change this to have the actual range.
Reports	MNTR-316	Clean internal sort values from reports
UI	MNTR-336	WS-M subscription can be created only once from DPOD Web Console.
UI Reports Sample Config	MNTR-334	Provided workaround to issues that stopped UI, Reports, and other components from restarting, throwing an XADUPID Exception.
Sample Config	MNTR-309	Long configuration sampling caused timeouts. Increased default timeout to 90 minutes.
Internal Health	MNTR-241	Store HeapDump directed to directory /log to avoid using up the Store.
Internal Health	MNTR-257	Stop all services from the CLI may create issues with pid files left behind.

Release Notes 1.0.1.0

New Features

Component	Issue	Description
UI	MNTR-200	Added support to disable/enable log targets. Used to disconnect DPOD for planned outages or uninstall procedure of a Device from DPOD
Install	MNTR-204	Reduce system requirements for Dev ISO to 1 Disk 15GB , 3.5 GB Mem
Reports	MNTR-223 MNTR-233	Add system parameter to disable SMTP authentication when sending reports by e-mail. Add system parameter to disable SMTP TLS/SSL when sending reports by e-mail
Presale	MNTR-222	Generate syslog and WS-M data for presale demonstration
UI	MNTR-136, MNTR-258	Provide new Dashboard to let the administrator detect missing data in situations where syslogs or WSM events are dropped.
UI	MNTR-266	Expose WSM subscription parameters as system parameters
B2B	MNTR-303	Transactions screen now supports presenting of B2B transactions.
Reports	MNTR-157	Allowing users to add a dictionary for ES terms translation to be used as headers , e.g. for value "{"doc_count":"# Results", "key": "Service Name on DP"}".

Fix List

Component	Issue	Description
Security	MNTR-213	Improve HTTP protocol security
Install	MNTR-209 MNTR-249	IDG prerequisites changes: Remove prerequisites for IDGs with firmware V7.x to enable the "SOAP Configuration Management v2004" and " SOAP management URI" in IDG WebGUI in XML Management Interface. Recommended IDG fix - http://www-01.ibm.com/support/docview.wss?uid=swg1IT14028
CLI	MNTR-215 MNTR-232 MNTR-239 MNTR-247 MNTR-251	Must gather script ignores destination directory and improve versioning information
UI	MNTR-203	Check in the UI that the difference between server time and browser time (GMT) is not greater than 10 minutes
UI	MNTR-216	Improved finding the correct time zone of the browser
WSM Agent	MNTR-246 MNTR-237	Bad grammar XML caused infinite parsing loop
UI	MNTR-230	When user adds a new IDG in DPOD, validate that device name does not contain spaces
UI	MNTR-226	Improve system messages during IDG setup issues in DPOD UI
Config Sample	MNTR-232	Change audit record doesn't always display
Security	MNTR-206	Add confirmation of password for SOMA requests credentials
Install	MNTR-172	Improve documentation for uninstall procedure
Install	MNTR-253 MNTR-256	Clarify ISO Edition: Light (Developer) Edition vs. Production (All-In-One) Edition, Clarify before installation the requirements of 3 disks for Production Edition
Upgrade	MNTR-231 MNTR-255	Fix in upgrade scripts - backup scripts for artifacts and software configuration, configuration data location.
Install	MNTR-227 MNTR-240	Remove unnecessary steps in installation
Syslog Agent	MNTR-302	Improve error handling when failed to identify messages object types when storing parsed messages.

Known Issues

Component	Issue	Description
General	MNTR-175	DPOD shows "Unknown" device or domain

Browser not supported