This page lists system parameters that are of interest in the appliance maintenance context. The parameters can be configured using the system parameters page.

Parameter	Description	Default Value
Enable Backups	Global flag to enable or disable all backups. No backups will run when this flag is set to false	true
Enable Syncs	Global flag to enable or disable all configuration syncs. No syncs will run when this flag is set to false	true
Enable Firmware Upgrades	Global flag to enable or disable all firmware upgrades. No upgrades will run when this flag is set to false	true
Maintenance User Scripts Source Path	Location of the user Plan/Task Pre/Post scripts in the file system	/app/custom/scripts
Maintenance User Scripts Working Path	The user scripts' execution path. This is normally the same as the source path above	/app/custom/scripts
Maintenance Window Start Time (HH:MM)	Global value for the maintenance window start time. This value may be overridden in a specific plan's settings	22:00
Maintenance Window End Time (HH:MM)	Global value for the maintenance window end time. This value may be overridden in a specific plan's settings	06:00
Maintenance Syslog Notifications Destination Hostname	The hostname or IP address where syslog records are sent to	No Default
Maintenance Syslog Notifications Destination Port	The port where syslog records are sent to	60000
Maintenance Error Syslog Severity Field Value	The severity of error operations syslog records (such as "Plan Failed")	error
Maintenance Success Syslog Severity Field Value	The severity of success syslog records (Such as "Plan Finished Successfully")	info
Maintenance - Timeout in Seconds for Quiesce Operations	The timeout (in seconds) sent to the Quiesce operation when a quiesce operation was requested in the activity. DPOD will add 3 minutes to this timeout and check if all domains quiesced within this period.	1800
Maintenance - Timeout in Seconds for Unquiesce Operations	The timeout (in seconds) for DPOD to wait until all domains unquiesce before marking the task as failed DPOD will add 3 minutes to this timeout	1800
Maintenance - Timeout in Seconds for Restart Operations	The timeout (in seconds) for DPOD to wait for a device to restart before marking the task as failed	1800
Backups - Destination Path	Destination path where DPOD saves its backup files. This path must be a new dedicated mounted filesystem (mount point). Backups may not be stored on existing mount point created during DPOD's installation. User can use the Linux command "df -h" to make sure the path entered is a mounted mount point	/data/backups/store
Backups - Backup Store Free Space Threshold (Percent)	Before starting any backup, DPOD ensures that the destination path has enough free storage available. When the percentage of free storage is less than this value, the backup will not proceed	10
Backups - DataPower Temp Free Space Threshold (Percent)	For Secure Backup - the backup will be first stored in the DataPower temp filesystem, Before starting a secure backup, DPOD ensures that the temp DataPower filesystem has enough free storage available. When the percentage of free storage is less than this value, the backup will not proceed	10
Maintenance - Max Minutes Before Marking Task as Canceled	The amount of time (in minutes) DPOD waits before marking a hung task as cancelled. This time is relative to the last status change on the task. When DPOD marks such tasks as cancelled, other tasks may start executing on the device. (The task itself will not be interrupted)	60
Syncs - Temp Files Path	Location where DPOD saves temporary exports and files used by the configuration sync tasks	/app/tmp/sync
Firmware Upgrade - Repository Path	Where DPOD should look for the firmware upgrade image files. It is recommended that you set up a mount point and point the parameter to it. Using the following DPOD paths and subfolders of those paths is not supported: /app /data /logs /installs /var	/tmp
Firmware Upgrade - Local Node IP Address	The network address of DPOD that monitored device can access using SSH	No Default
Firmware Upgrade - OS User Name	DPOD OS user name for SCP access	productuser1
Firmware Upgrade - OS User Password	DPOD OS user password for SCP access	*******
The HTTP Address of the UI	The URL prefix for your DPOD UI - for example: https://10.0.0.50 (everything before /op) it will be used in the maintenance result emails	No Default

Browser not supported