/
Log-in to DPOD

IBM DataPower Operations Dashboard v1.0.22.x

Log-in to DPOD

Prerequisites

  • A supported browser

  • The DPOD server IP address / DNS name (in case of a Cell environment, this would be of the Cell Manager)

  • Network access to DPOD server (in case of a Cell environment, this would be of the Cell Manager)

  • Valid username and password

Login to the Web Console

  1. Open your browser

  2. Enter the following URL into the address bar: https:/<DPOD server IP address>/

  3. DPOD's Web Console is shipped with a self-signed certificate. If the certificate has not been replaced, you might get a security exception in your browser.

  4. Log in with the username and password you have been provided with.

Login to the Admin Console

  1. Open your browser

  2. Enter the following URL into the address bar: https:/<DPOD server IP address>/admin

  3. DPOD's Admin Console is shipped with a self-signed certificate. If the certificate has not been replaced, you might get a security exception in your browser.

  4. Log in with the username and password you have been provided with.

 

It is highly recommended to replace the self-signed certificates.

 

 

Related content

Operating System Requirements for Non-Appliance Mode
Operating System Requirements for Non-Appliance Mode
Read with this
Log-in to DPOD
Log-in to DPOD
More like this
Replacing Certificates of the Store
Replacing Certificates of the Store
Read with this
Log-in to DPOD
Log-in to DPOD
More like this
Log-in to DPOD
Log-in to DPOD
More like this
Log-in to DPOD
Log-in to DPOD
More like this

Copyright © 2015 MonTier Software (2015) Ltd.