...
| Anchor | ||||
|---|---|---|---|---|
|
From | To | Ports (Defaults) | Protocol | Usage |
|---|---|---|---|---|
DPOD Cell Manager | Each Monitored Device | 5550 (TCP) | HTTP/S | Monitored device administration management interface |
DPOD Cell Manager | DNS Server | TCP and UDP 53 | DNS | DNS services. Static IP address may be used. |
DPOD Cell Manager | NTP Server | 123 (UDP) | NTP | Time synchronization |
DPOD Cell Manager | Organizational mail server | 25 (TCP) | SMTP | Send reports by email |
DPOD Cell Manager | LDAP | TCP 389 / 636 (SSL). TCP 3268 / 3269 (SSL) | LDAP | Authentication & authorization. Can be over SSL. |
| DPOD Cell Manager | Each DPOD Federated Cell Member | 443 (TCP) | HTTP/S | Communication (data + management) |
| DPOD Cell Manager | Each DPOD Federated Cell Member | 9300-9305 (TCP) | ElasticSearch | ElasticSearch Communication (data + management) |
NTP Server | DPOD Cell Manager | 123 (UDP) | NTP | Time synchronization |
Each Monitored Device | DPOD Cell Manager | 60000-60003 (TCP) | TCP | SYSLOG Data |
Each Monitored Device | DPOD Cell Manager | 60020-60023 (TCP) | HTTP/S | WS-M Payloads |
Users IPs | DPOD Cell Manager | 443 (TCP) | HTTP/S | DPOD's Web Console |
Admins IPs | DPOD Cell Manager | 22 (TCP) | TCP | SSH |
| Each DPOD Federated Cell Member | DPOD Cell Manager | 443 (TCP) | HTTP/S | Communication (data + management) |
| Each DPOD Federated Cell Member | DPOD Cell Manager | 9200, 9300-9400 | ElasticSearch | ElasticSearch Communication (data + management) |
Each DPOD Federated Cell Member | DNS Server | TCP and UDP 53 | DNS | DNS services |
Each DPOD Federated Cell Member | NTP Server | 123 (UDP) | NTP | Time synchronization |
NTP Server | Each DPOD Federated Cell Member | 123 (UDP) | NTP | Time synchronization |
Each Monitored Device | Each DPOD Federated Cell Member | 60000-60003 (TCP) | TCP | SYSLOG Data |
Each Monitored Device | Each DPOD Federated Cell Member | 60020-60023 (TCP) | HTTP/S | WS-M Payloads |
Admins IPs | Each DPOD Federated Cell Member | 22 (TCP) | TCP | SSH |
Cell Manager Installation
...
- DPOD cell manager should be installed in Non-Appliance Mode with Medium Load architecture type, as detailed in the Hardware and Software Requirements. The manager server can be both virtual or physical.
- Install the following software package (RPM): bc
Installation
Install DPOD as described in one of the following installation procedures:
...
- Install DPOD in Non-Appliance Mode: Installation procedure
...
- The four letter Installation Environment Name should be identical to the one that was chosen for the Cell Manager.
| Note |
|---|
As described in the prerequisites section, the federated cell member should have two network interfaces. When installing DPOD, the user is prompted to choose the IP address for the Web Console - this should be the IP address of the external network interface (although the FCM does not run the Web Console service). |
...
| Code Block | ||
|---|---|---|
| ||
/dev/vg_data2/lv_data /data2 xfs defaults 0 0 /dev/vg_data22/lv_data /data22 xfs defaults 0 0 /dev/vg_data3/lv_data /data3 xfs defaults 0 0 /dev/vg_data33/lv_data /data33 xfs defaults 0 0 /dev/vg_data4/lv_data /data4 xfs defaults 0 0 /dev/vg_data44/lv_data /data44 xfs defaults 0 0 |
Create directories for the new data mount points
| Code Block | ||
|---|---|---|
| ||
mkdir -p /data2 /data22 /data3 /data33 /data4 /data44 |
Example for the Final Configuration for 3 Store's nodes
...
| Code Block | ||
|---|---|---|
| ||
numactl -s Example output for 4 CPU server : policy: default preferred node: current physcpubind: 0 1 2 3 4 5 6 7 8 9 10 11 12 cpubind: 0 1 2 3 nodebind: 0 1 2 3 membind: 0 1 2 3 |
Alter Syslog agents
The services files are located on the directory /etc/init.d/ with name prefix MonTier-SyslogAgent- (should be 4 service files)
Look in the service file the string "numa" and make sure the numa variable definition is as follows :
| Code Block | ||
|---|---|---|
| ||
numa="/usr/bin/numactl --membind=0 --cpunodebind=0"
/bin/su -s /bin/bash -c "/bin/bash -c 'echo \$\$ >${FLUME_PID_FILE} && exec ${numa} ${exec}...... |
Alter Store's Node 2 and 3 (OPTIONAL - only if the server has 4 CPUs)
...