Versions Compared

Old Version 4

changes.mady.by.user Assaf Cohen

Saved on

compared with

New Version Current

changes.mady.by.user Sara Weisz

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

The source gateway needs to be an existing gateway, which was already configured to DPOD (via the Manage→Devices→Gateway)
Admin Password (Only appears if the user DPOD uses a gateway user which is not "admin") - see "Changing the Admin Password" later on this page
Source Gateway -  the name of the source gateway.
Certificate Name - the certificate that will be used for the Secure-Backup process

Warning

The Secure-Restore step will require you to create a Crypto Identification Credentials object on the target gateway.
The Certificate you provide at this on the basic details step and the Crypto Key will be required for you to create this object.
Do not start the process unless you have both of them available and at reach.

Quiesce - Whether to a quiesce should be performed before the Secure-Backup beginsstarts.

Target Gateway

Info
The target gateway details are the details of the gateway before the Secure-Restore, and not the future post-restore details.

Target Gateway - If the target gateway is configured to DPOD, choose "Existing Monitored Gateway", and choose the gateway name from the device filter.
If the target gateway was not configured in DPOD choose "New gateway" and enter the gateway details:

  • Name - the appliance gateway name ("Appliance Name" in the gateway's system settings)
  • SOMA Address and Port - address and port of the gateway's XML Management InterfaceSOMA
  • ROMA Port - port of the gateway's REST Management Interface
  • User and password - the user and password that will be used to issue commands to the gateway

Crypto IC - the name of the Crypto Identification Credentials object, you will need to create this object on the target gateway before the Secure-Restore runsstarts.
Quiesce - Whether to a quiesce should be performed before the Secure-Restore beginsstarts..

Changing the Admin Password

After Secure-Restore is run on the target gateway, the admin user's password will always be changed back to "admin"
If DPOD is already using the admin user for the source gateway, the migration process will automatically change the admin password on the target gateway to the old source gateway's admin password.
If DPOD is using a different user, the migration process will change the admin password to the password you entered on in the "Admin Password" field (in of the Source Gateway details).


Next: Pre-Backup validations

...