I In order for DPOD to be able to gather the information it requires, it enables various features and creates several objects in DataPowerthe gateway.
The table below details the objects and the methods you can use to undo these changes.
Object in Gateway | Action | Explanation |
---|
SOMA Configuration
(Device LevelUndoing the Change | ||
---|---|---|
XML Management Interface | Update | Upon a user request from the Web Console ( |
If the SOMA configuration is not fully aligned, then DPOD will set it correctly and make the following changes to the XML Management Interface
[Network → Management → XML Management Interface]
clicking the "Setup Syslog" on a device), the XML Management Interface configuration is updated to the same configuration described in Prepare your Monitored Devices:
|
|
Firmware 6.X only - Disable (uncheck) SOAP Configuration Management (v2004)
No.
To undo these changes, leave this checkbox unchecked when you install DPOD.
If a backup is performed as requested in the installation procedure, then this data can be extracted from the backup by restoring it to a temporary Gateway instance and viewing the exact configuration.
The specific scripts will then set appropriate values identified in the action above.
On the gateway's Web GUI, in “XML Management Interface” screen, change the configuration to the desired one. | ||
Statistics Settings | Update | Upon a user request from the Web Console |
No.
To undo this change, leave this checkbox unchecked when you install DPOD.
If a backup is performed as requested in the installation procedure, then this data can be extracted from the backup by restoring it to a temporary Gateway instance and viewing the exact configuration.
The specific scripts will then set appropriate values identified in the action above(clicking the "Setup Syslog" on a device), statistics are enabled. | On the gateway's Web GUI, in “Statistics Settings” screen, disable the statistics. | ||
Statistics Settings | Update | Upon a user request from the Web Console (clicking the "Setup Syslog" on a domain or for all domains), or when DPOD is set to automatically setup Syslog on new domains, statistics are enabled. | On the gateway's Web GUI, in “Statistics Settings” screen, disable the statistics. |
Host Alias |
default domain) | Add | Upon a user request from the Web Console |
(clicking the "Setup Syslog" on a device), the following host aliases are created:
|
|
|
|
| On the gateway's Web GUI, in “Host Alias” screen, select the host aliases and delete them. |
Log |
Category |
default domain) | Add | Upon a user request from the Web Console ( |
clicking |
the "Setup Syslog" on a device), |
Log Target
(Domain Level)the following log category is created:
| On the gateway's Web GUI, in “Log Categories” screen, select the log category and delete it. | |
Log Category | Add | Upon a user request from the Web Console ( |
clicking |
The log target banes are DPOD-MSC-<env name>-1 and DPOD-MSC-<env name>-2 (or montier-syslog-1 and montier-syslog-2 if the setup was done before DPOD v1.0.5)
Domains added subsequently will not have these 2 DPOD log targets configured automatically.
Yes, it can be removed with a script.
(Device Level)
the "Setup Syslog" on a domain or for all domains), or when DPOD is set to automatically setup Syslog on new domains, the following log categories are created:
| On the gateway's Web GUI, in “Log Categories” screen, select the log categories and delete them. | |
Log Target | Add | Upon a user request from the Web Console ( |
clicking the "Setup Syslog" on a device) |
, the following log target is created:
| When deleting a monitored device via [Manage → Devices → Gateways → Delete Gateway], make sure to check the option "Delete Syslog logs targets from device" in the confirmation window. Alternatively, on the gateway's Web GUI, in “Manage Log Targets” screen, select the log target and delete it. | |
Log Target | Add | Upon a user request from the Web Console (clicking the "Setup Syslog" on a domain or for all domains), |
No.
In order to undo these changes, leave this checkbox unchecked when you install DPOD.
If a backup is performed as requested in the installation procedure, then this data can be extracted from the backup by restoring it to a temporary Gateway instance and viewing the exact configuration.
The specific scripts will then set appropriate values identified in the action above.
Extended Transaction
Device Levelor when DPOD is set to automatically setup Syslog on new domains, the following log targets are created:
| Yes, when deleting a monitored device via [Manage → Devices → Gateways → Delete Gateway], make sure to check the option "Delete Syslog logs targets from device" in the confirmation window. Alternatively, on the gateway's Web GUI, in “Manage Log Targets” screen, select the log targets and delete them. | |
Log Target | Add | Upon a user request from the Web Console |
(clicking the "Setup WS-M" on a domain or for all domains), or when DPOD is set to automatically setup WS-M on new domains, the following log target may be created:
| Yes, when deleting a monitored device via [Manage → Devices → Gateways → Delete Gateway], make sure to check the option "Delete Syslog logs targets from device" in the confirmation window. Alternatively, on the gateway's Web GUI, in “Manage Log Targets” screen, select the log targets and delete them. | |
XSLT File | Update | Upon a user request from the Web Console |
Extended Transaction
Service &
Domain LevelNo, the checkpoint cannot be undone automatically.
Since an Extended transaction is intrusive by nature (as documented), DPOD adds Transform Action rule to the end of each rule for each Processing Policy for each WSP, MPG that exists in this domain. Since this is an Intrusive action, the appropriate alert will appear – see Appendix A for a reference to the documentation.
Partially.
If no new Actions were added after the Action was added by DPOD then a customer script can remove it but Support can not provide such functionality.
WS-M Agent definition
Device Level
For each domain in the device, DPOD modifies the Web Service Management Agent [Objects→Web Service Management Agent]:
- Change attribute "Maximum Memory Usage" to 102400
- Change attribute "Capture Mode" to All
DPOD doesn’t change the admin state of the objects, therefore DPOD changes the gateway configuration only if this feature is used.
To undo these changes, the state of this checkbox needs be kept before you install DPOD.
If a backup is performed as requested in the installation procedure, then this data can be extracted from the backup by restoring it to a temporary Gateway instance and viewing the exact configuration.
The specific scripts will then set appropriate values identified in the action above.
WS-M Agent definition
Domain Level
For a selected domain in the device, DPOD modifies the Web Service Management Agent [Objects→Web Service Management Agent]:
- Change attribute "Maximum Memory Usage" to 102400
- Change attribute "Capture Mode" to All
DPOD doesn’t change the admin state of the objects, therefore DPOD changes the gateway configuration only if this feature is used.
To undo these changes, the state of this checkbox needs be kept before you install DPOD.
If a backup is performed as requested in the installation procedure, then this data can be extracted from the backup by restoring it to a temporary Gateway instance and viewing the exact configuration.
The specific scripts will then set appropriate values identified in the action above.
This is a temporary object that is used for a predefined amount of time (default is 60 minutes) and when expired it is deleted by Gateway automatically
...
(clicking the "Setup Syslog" on a domain or for all domains), or when DPOD is set to automatically setup Syslog on new domains, the following XSLT file may be uploaded to the gateway:
| On the gateway's Web GUI, in “File Management” screen, delete the file. | ||
Certificate Monitor | Update | Upon a user request from the Web Console (clicking the "Setup Certificate Monitor" on a device), certificate monitor is enabled and set with the interval and reminder time. | On the gateway's Web GUI, in “Crypto Certificate Monitor” screen, disable the certificate monitor or change the configuration to the desired one. |
Web Services Management Agent | Update | Upon a user request from the Web Console (clicking the "Setup WS-M" on a domain or for all domains), or when DPOD is set to automatically setup WS-M on new domains, the Web Services Management Agent configuration is updated:
| On the gateway's Web GUI, in “Web Services Management Agent” screen, change the configuration to the desired one. Be aware that this may affect other WS-M Agent subscribers other than DPOD. |
WSM Agent Subscription | Create | Upon a user request from the Web Console (clicking the "Create" on the “Create WS-M Subscription” page), a temporary subscription will be created for a predefined amount of time (usually for a few minutes). | The subscription is automatically deleted by the gateway when expired. |