Page Comparison

...

1. Verify the current size of the /data mount point:

   Code Block
   df -h /data

   The system output should resemble the following:
   

2. Verify the new disk size:

   Code Block
   fdisk -l |grep /dev/sdd

   The system output should resemble the following:
   

3. Create a new partition with the new size:

   Code Block
   fdisk /dev/sdd

   
   

   1. Press p to print the partition table and ensure there are no existing partitions. 
      
   2. Press n to create a new primary partition.
   3. Press p for primary.
   4. Press 1 for the partition number
   5. Press Enter twice
      
   6. Press t to change the system's partition ID.
   7. Type 8e to change the Hex Code of the partition for Linux LVM.
   8. Press w to write the changes to the partition table.
      

   9. Reboot the system:

      Code Block
      reboot

      
      

   10. When the system is back up, ensure the new partition is created:

       Code Block
       fdisk -l |grep /dev/sdd

        The system output should resenble the resemble  the following:
       

   11. Stop the application by running app-util.sh and selecting option 2 (stop all)

   12. Create a new LVM Physical Volume (PV):

       Code Block
       pvcreate /dev/sdd1

       
       

   13. Extend the LVM Volume Group (VG):

       Code Block
       vgextend vg_data /dev/sdd1

       
       

   14.  Extend the LVM logical volume (LV): 

       Code Block
       lvextend -l +100%FREE /dev/vg_data/lv_data

       
       

   15.  Identify the /data file system type (for CentOS 7.2 based appliances the type is xfs): 

       Code Block
       cat /etc/fstab |grep /data

        The system output should resemble the following:
       
       
       

   16.  Resize the file system. Select the correct command below for your file system type:

       Code Block
       title ext4
       resize2fs /dev/vg_data/lv_data

       
       

       Code Block
       title xfs
       xfs_growfs /dev/vg_data/lv_data

       The system output should resemble the following:
       
       
       

   17. To display the new  size size of the /data mount point:

       Code Block
       df -h /data

       The system output should resemble the following:
       

...