Page Comparison

...

1. Stop DPOD components 

2. Ensure all components are down

3. Disable all DPOD services except Derby, UI and Reports

   1. Edit (with vi) /etc/sysconfig/MonTier and find the line starting with

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby MonTier-es-raw-trans-Node-1"

      and remove all components except for MonTier-Derby:

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby"

      
      

   2. Comment out the following lines:

      Code Block
      SERVICES_SECOND_GROUP="MonTier-es-raw-trans-Node ..." SERVICES_THIRD_GROUP="MonTier-HK-ESRetention" ... SERVICES_FORTH_GROUP="MonTier-AggAgent- ..." SERVICES_FIFTH_GROUP="MonTier-BalancerAgent ..." SERVICES_SIXTH_GROUP="MonTier-WsmAgent-1 ..."

      
      

   3. Change 

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports MonTier-HK-WsmKeepalive MonTier-HK-SyslogKeepalive"

      to remove all components except MonTier-UI and MonTier-Reports
      

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports"

      
      

4. Change DPOD's Elastic Search alias entry in /etc/hosts to direct to the internal console:

   Code Block
   vi /etc/hosts

   Change the line that directs montier-es and montier-es-http to point to the internal Console IP Address (1.1.1.1 in the example below)

   Code Block
   1.1.1.1 montier-es 1.1.1.1 montier-es-http

   
   

5. Start configuration database service

   Code Block
   start_services.sh -o derby ij

   
   

6. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name='agents.management.enabled';

   
   

7. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name = 'system.internal_self_service.is_internal';

   
   

8. If you wish to let the external self service users access the DevOps Services Portal, change the following system parameters in the external self service console (you can do that from Manage → Customize → System Parameters after the web console starts):
   a. Internal Self Service Address - enter the address of the internal self service portal
   b. Internal Self Service User Name - the DPOD user name that will be used to access the internal portal - it is recommended to create a new user for this purpose
   c. Internal Self Service Password - the password for the user that will be used to access the internal portal
   d. Internal Self Service Webserver Port - (defaults to 443) the webserver port for the internal self service portal - change this value only if advised.

...