Page Comparison

...

1. Stop DPOD components 

2. Ensure all components are down

3. Disable all DPOD services except Derby, UI and Reports

   1. Edit (with vi) /etc/sysconfig/MonTier and find the line starting with

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby MonTier-es-raw-trans-Node-1"

      and remove all components except for MonTier-Derby:

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby"

      
      

   2. Comment out the following lines:

      Code Block
      SERVICES_SECOND_GROUP="MonTier-es-raw-trans-Node ..." SERVICES_THIRD_GROUP="MonTier-HK-ESRetention" ... SERVICES_FORTH_GROUP="MonTier-AggAgent- ..." SERVICES_FIFTH_GROUP="MonTier-BalancerAgent ..." SERVICES_SIXTH_GROUP="MonTier-WsmAgent-1 ..."

      
      

   3. Change 

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports MonTier-HK-WsmKeepalive MonTier-HK-SyslogKeepalive"

      to remove all components except MonTier-UI and MonTier-Reports
      

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports"

      
      

4. Change DPOD's Elastic Search alias entry in /etc/hosts to direct to the internal console:

   Code Block
   vi /etc/hosts

   Change the line that directs montier-es and montier-es-http to point to the internal Console IP Address (1.1.1.1 in the example below)

   Code Block
   1.1.1.1 montier-es

   Edit DPOD UI configuration file:

   Code Block
   vi /app/ui/MonTier-UI/conf/MonTierUI.conf

   and change the port on the following line

   Code Block
   elasticsearch.discovery.zen.ping.unicast.hosts=montier-es:9300

   to the new port

   Code Block
   elasticsearch.discovery.zen.ping.unicast.hosts=montier-es:9302

   Comment out the following lines:

   Code Block
   elasticsearch.node.name=MonTier-UI elasticsearch.network.host=montier-es-http elasticsearch.transport.tcp.port=9320 elasticsearch.http_node.host= 1.1.1.1 montier-es-http elasticsearch.http_node.port=9200

   
   

5. Start configuration database service

   Code Block
   start_services.sh -o derby

   Enter ij to issue SQL commands

   Code Block
   language bash linenumbers true
   ij ij

   
   

6. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name='agents.management.enabled';

   
   

7. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name = 'system.internal_self_service.is_internal';

   
   

8. If you wish to let the external self service users access the DevOps Services Portal, change the following system parameters in the external self service console (you can do that from Manage → Customize → System Parameters after the web console starts):
   a. Internal Self Service Address - enter the address of the internal self service portal
   b. Internal Self Service User Name - the DPOD user name that will be used to access the internal portal - it is recommended to create a new user for this purpose
   c. Internal Self Service Password - the password for the user that will be used to access the internal portal
   d. Internal Self Service Webserver Port - (defaults to 443) the webserver port for the internal self service portal - change this value only if advised.

...

1. Stop DPOD components

2. Ensure all components are down :

3. Change DPOD ElasticSearch alias entry in /etc/hosts to bind to external IP address

   Code Block
   vi /etc/hosts

   and change the line 

   Code Block
   127.0.0.1 montier-es

   to DPOD's internal console IP address (e.g. 1.1.1.1)

   Code Block
   1.1.1.1 montier-es 1.1.1.1 montier-es-http

   
   

4. Start DPOD components

5. Ensure all components are up and running

   Code Block

   app_status.sh #Output Example: MonTier-AppAdmin (pid 17836) is running... MonTier-Derby (pid 17940) is running... MonTier-es-raw-trans-Node-1 (pid 18125) is running... MonTier-es-raw-trans-Node-2 (pid 21122) is running... MonTier-es-raw-trans-Node-3 (pid 21103) is running... MonTier-es-raw-trans-Node-4 (pid 21120) is running... MonTier-SyslogAgent-1 (pid 27350) is running... MonTier-SyslogAgent-2 (pid 27286) is running... MonTier-SyslogAgent-3 (pid 27177) is running... MonTier-SyslogAgent-4 (pid 27075) is running... MonTier-WsmAgent-1 (pid 27002) is running... MonTier-WsmAgent-2 (pid 26921) is running... MonTier-WsmAgent-3 (pid 26881) is running... MonTier-WsmAgent-4 (pid 26773) is running... MonTier-HK-ESRetention (pid 24012) is running... MonTier-HK-WdpDeviceResources (pid 27590) is running... MonTier-HK-WdpServiceResources (pid 27447) is running... MonTier-HK-SyslogKeepalive (pid 1976) is running... MonTier-HK-WsmKeepalive (pid 1932) is running... MonTier-UI (pid 1635) is running... MonTier-Reports (pid 1830) is running... MonTier-AgentNode (pid 1736) is running...

DPOD External Self-Service post installation checks

...

1. .

...

1. Start DPOD components

2. Ensure all required components are up:

   The following components must be running:

3. MonTier-Derby
4. MonTier-UI
MonTier-Reports
Enure the UI components is up using ElasticSearch Client mode connection

.


Inside the UI log file at /logs/ui/ MonTier-UI.log  locate the following line:

Code Block
04/04/2016 06:55:53,941- DEBUG o.m.c.u.e.ElasticSearchClient [montier-ui-server-startStop-1] Connecting to ElasticSearch as transport client

Basic Installation Verification
5. Start DPOD's console and sign in: http://<DPOD Server>/
6. Ensure the System Overview dashboard contains data
Ensure the Investigate screen contains data

.