Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

DPOD software updates are available from time to time and include enhancements, security updates, component upgrade, bug fixes etc.

The following sections describe the process of upgrading an existing installation. 

To upgrade for v. 1.0.9.0 you must be at version v11.0.8.5.

You should consider performing a full backup.

RPM Prerequisites

Additional RPM packages need to be installed when upgrading a non appliance DPOD installation.
Please make sure the following packages are installed before upgrading: fontconfig

Obtain the software update

DPOD software updates are available through IBM fix central.

...

  1. The update file in the format of : DPOD-fixpack-<version number>.sfs (for example: DPOD-fixpack-1_0_9.sfs)
  2. The md5 hash calculation of the update file : DPOD-update-<version number>.md5

Copy the software update to the DPOD server

Copy the update files to the following directory on the DPOD server :

...

Code Block
themeRDark
mkdir -p /installs/update/fix/TODO

Install the software update

Run the following command from the location you downloaded the update files to.

...

Code Block
themeRDark
MonTierUpdateInstaller.sh -u DPOD-update-1_0_9.sfs -s DPOD-update-1_0_9.md5

Data Migration Tool

The upgrade process checks the existence of Store indices that were created in early versions of the product.
In case that early version indices exist, the upgrade process will stop and notify you of a manual step that you will need to run :

Code Block
themeRDark
Some of the stored application data cannot be migrated to the latest version of the Store service.

A data migration tool has been deployed in /installs/data-migration-tool.

You may run it using the following command:

/installs/data-migration-tool/data-migration-tool.sh

Further information can be found in the documentation at:

Admin Guide -> Installation and Upgrade -> Upgrade -> Upgrade to 1v1.0.109.0 - Special Steps

Configuring the Data Migration Tool

You may edit the configuration file /installs/data-migration-tool/data-migration-tool.conf before running the tool. There are two entries of interest:

  • duration.limit (default: 999999) - limits the execution time in minutes.
    This option is useful if you want to schedule the tool to run during off-peak time. In such a case, you can limit the tool to run for a few hours each time and schedule it to start when off-peak time starts, so performance will not be impacted during peak time hours.
  • delete.kibana_indices (default: true) - determined whether Kibana indices should be deleted or not.
    true - delete old Kibana indices - all exiting Kibana dashboards and other settings will be deleted.
    false - keep and migrate Kibana indices to the new store version - however Kibana version that comes with DPOD 1.0.9.0 is unable to read the old indices format, so it is up to you to fix the indices manually according to Kibana's documentation.
  • Leave the other settings in data-migration-tool.conf as they are, unless advised otherwise by support.

Running the Data Migration Tool

To run the data migration tool manually:

...

Code Block
themeRDark
Data migration tool finished successfully

Interrupting the Data Migration Tool

Pressing Ctrl+C or setting duration.limit in the configuration file will stop the tool during the migration process.
Stopping the tool will cause it to re-process the last index that was migrated on the next run.

While this is usually not an issue, note that on some cases it may cause complications, for example:
1. The user wants the tool to run during a nightly maintenance window, between 2-4 AM.
2. The tool is scheduled using cron to 2 AM and the duration.limit setting is set to 120 minutes.
3. For this specific user, depending on its hardware and data sizes, processing of each index takes about 3 hours.
4. Since the tool is interrupted after 2 hours, on the next night, the tool will try to migrate the same index again and will never advance to the next index.

Resuming Software Update

To proceed with the software update, you can rerun the software update command:

...

Please review the upgrade log file if the console displays any error messages.


Update Store Allocation

Open the DPOD admin console on your favorite browser:

...