Versions Compared

Version Old Version 19 New Version 20
Changes made by

Former user

Hanan Kenan

Saved on

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

On the OS launch screen, choose “Install Appliance” to start the automatic OS installation for Standard Edition.
: Image Removed cImage Added

The required packages will now be installed. Wait for the installation to complete before proceeding.

Image Added

(This should take a few minutes)Image Removed

Note

Light Edition should have different launch screen that state this is a Light Edition. Rest of the steps are the same


Network Configuration

When the OS installation completes, you will be presented with the Network Configuration screen, used to provide DPOD with the network information it requires.

 

Image Removed

  1. Enter DPOD's host name, e.g.  DPOD-2
    Image Added
    (You may add this name to your organization's DNS)
  2. Enter the IPv4 address, e.g. 192.168.65.170
  3. Enter the network netmask, e.g. 255.255.255.0
  4. Enter the default gateway: e.g. 192.168.65.2
  5. Enter primary and secondary DNS server IP addresses (not mandatory)

...