The Filters Stripe comprises a set of filter elements that let you control the attributes of the information displayed in the main window.
The Filters Stripe is displayed at the top of the main window, for all views except the Reports view.
Using the Filters Stripe
To filter the information displayed, click on the filter element required. Performing this action will open a list containing the filter options.
You may then click the filtering option you want to apply. Alternatively, you may type in a value (e.g. a specific interval in the Time filter
or a specific device name in the Device filter) and click ‘Apply’. (You do not need to click ‘Apply’ if you select one of the options already displayed).
...
You may combine several filters simultaneously. DPOD will alter the displayed information to reflect it.
Active filters will show the
icon next to them, inactive filters will change show the color of the 
icon next to their name.
Additionally, the filter’s name and value will be added to the active filters display – a line of text immediately underneath the filter elements.
...
To disable a filter, click its filter element and select ‘clear’ from the bottom of the list. Alternatively use the ‘Reset Filters’ link found at the far right of the active filters display.
This will reset the display to the default filter which is Time [Last 24 Hours].
Tools
Three tools are available in the bottom-right side of the filters stripe, from left to right:
Share - allow to share the current page, including any active filters
Favorite Filters - allow to save the current set of active filters and run saved sets
Reset Filters - reset all the filters to their initial state