...
- Inside DPOD's Web Console, navigate to Monitored Devices [Manage->Devices->Monitored Devices] and click on “Add Device”
- Enter the information required. (Consult Device Management for details)
Note that the device name must be identical to the System Identifier/Appliance Name of the DataPower Gateway as set in the IDG itself, and must meet the requirements detailed in http://www-01.ibm.com/support/docview.wss?uid=swg21668456.
- Click “Add”
- DPOD will add the device. (Verify by locating the new device in the list of monitored devices)
| Info |
|---|
When updating the "Log Target Source Address" after the device was added and syslog was setup for the device , the user must setup the syslog for device again in order for the change to take effect on the monitored device (see next item "Setup Syslog For The New Monitored Device" ). |
Configure The New Monitored Device
...