...
- Customer have DataPower appliances in Active/Passive or Active/Standby. All DataPower appliances in any configuration must have unique IP address
- DPOD will be installed, maintained and configured twice (in v1.0.5 a new API was exposed to add a new DataPower to DPOD and it can be consumed from a script.). DPOD will be configured to monitor all DataPower (active, standby and passive).
Since both servers are up no replication can exist. - The customer will need to add devices to the standby DPOD and set the agents for each device, from the Device Management page in the web console or using the Device RES API, setting up the devices in the standby DPOD will not change anything on the monitored devices (no log targets, host aliases or configuration changes will be made)
When the DPOD installation is in DR Standby mode, a message will appear next to the environment name (press F5 to reflect recent changes if you just changed DPOD from active to standby or vice versa)
- All DPOD network services (NTP, SMTP, LDAP ..) must have the same IP address (otherwise a post configuration script is required to be run by the DR software)
- Customer is required to have a 3rd party software tool or scripts that can provide:
...