...
DPOD can be installed both a Virtualized Environment (Hypervisors) or Physical server (Intel(C) Based based CPUs and supporting CentOS 6.x OS). consult the following table for decision.
...
DPOD offers 5 basic configuration setups for All-In-One (AIO) Edition: TODO hk - do we need to say this here?- we need to have to ISOs.
One configuration setup for development that will exists only in Development ISO file
Four configuration setups that exists for all other common setups .
The table below lists the typical usage characteristics of each edition, and the physical or virtual resources it requires.
Load Type | Goal | TPS Limits recommended | Supports Virtual Env | Cores (1) | Memory (3) | Storage (GB) |
|---|---|---|---|---|---|---|
Developer (Dev Edition Only) | To support evaluation, POCs and DPOD development | 5 | Yes | 2 | 4.5 GB | OS: 9 |
Low | Environment with low load levels | 40 | Yes | 6 | 48 GB | OS: 40 |
Medium | Environment with Moderate load | 80 | Yes | 8 | 128 GB | OS: 40 |
High | Environment with High load | 120 | Yes, but not recommend | 12 | 176 GB | OS: 40 |
High_20dv | Environment with High load with ~ 20 physical appliance | 200 | No. required to be install on a physical server | 20 | 192GB | OS: 40 |
...
This normally requires creating a custom architecture based on a sizing process.
Storage Recommendation
DPOD serve as database and should have, as such, very fast disks otherwise it will impact the delay of time between the transaction and its display on dashboards.
For Physical HW installation
Network Requirements
DPOD requires at least one network interface for accessing DPOD's User Interface and communications with DataPower Management Interface.
...