Page Comparison

...

1. Stop the DPOD virtual machine.
2. Select Edit virtual machine settings
3. Select Add > Hard Drive
4. Ensure to configure the new hard drive as Thick Provision Eager Zeroed
5.  Wait for the increase process to finish.
6. Start the DPOD virtual machine
   
   
   

Anchor
configure new disk configure new disk

Configure

...

the new disk at the OS Level

1. Verify the current size of the /data mount point:

   Code Block
   df -h /data

   The system output should resemble the following:
   

2. Verify the new disk size:

   Code Block
   fdisk -l |grep /dev/sdd

   The system output should resemble the following:
   

3. Create a new partition with the new size:

   Code Block
   fdisk /dev/sdd

   
   

   1. Press p to print the partition table and ensure there are no existing partitions. 
      
   2. Press n to create a new primary partition.
   3. Press p for primary.
   4. Press 1 for the partition number
   5. Press Enter twice
      
   6. Press t to change the system's partition ID.
   7. Type 8e to change the Hex Code of the partition for Linux LVM.
   8. Press w to write the changes to the partition table.
      

   9. Reboot the system:

      Code Block
      reboot

      
      

   10. When the system is back up, ensure the new partition is created:

       Code Block
       fdisk -l |grep /dev/sdd

        The system output should resenble the following:
       

   11. Stop the application by running app-util.sh and selecting option 2 (stop all)

   12. Create a new LVM Physical Volume (PV):

       Code Block
       pvcreate /dev/sdd1

       
       

   13. Extend the LVM Volume Group (VG):

       Code Block
       vgextend vg_data /dev/sdd1

       
       

   14.  Extend the LVM logical volume (LV) : 

       Code Block
       lvextend -l +100%FREE /dev/vg_data/lv_data

       
       

   15.  Identify the /data file system type (for CentOS 7.2 based appliances the type is xfs): 

       Code Block
       cat /etc/fstab |grep /data

        The system output should resemble the following:
       
       
       

   16.  Resize the file system. Select the correct command below for your file system type:

       Code Block
       title ext4
       resize2fs /dev/vg_data/lv_data

       
       

       Code Block
       title xfs
       xfs_growfs /dev/vg_data/lv_data

       The system output should resemble the following:
       
       
       

   17. To display the new  size of the /data mount point:

       Code Block
       df -h /data

       The system output should resemble the following:
       

 

Anchor
Update Configuration File Update Configuration File

Update the Store Configuration File

Starting with v1.0.4.0, DPOD is shipped with a script that performs all the necessary steps to update the Store configuration file.

...

...