Page Comparison

...

• • Stop DPOD virtual machine.
  • Press “Edit virtual machine settings”
  • Choose “add” -> “hard drive”
    make sure you configure the new hard drive as “Thick Provision Eager Zeroed”
    
    
    
    
  • Wait for the increase process to finish.
  • Wait for the increase process to finish.
  • Start DPOD virtual machine.

Configure the

...

new disk on OS level

• 
  
  • Display the current size of mount point / data : df -h /data
    
    

• • Display the current size of the new disk size : fdisk -l |grep /dev/sdd
    
    Image Added
    
    
• Create new partition for the new size :
  • fdisk /dev/sdd
  • Press p to print the partition table and make sure there are no partitions.
    
    Image Added
    
    
  • Press n to create a new primary partition.
  • Press p for primary.
  • Press 1 for the partition number
  • Press Enter two times.
    
    Image Added
    
    
  • Press t to change the system's partition ID.
  • Type 8e to change the Hex Code of the partition for Linux LVM.

  • Press w to write the changes to the partition table.
    
    Image Added
    
    

  • Reboot the system : reboot
  • After the system is up, make sure you see the new partition : fdisk -l |grep /dev/sdd
    
    Image Added
    
    
  • stop the application using app-util.sh -> option 2 (stop all)
  • create new LVM physical volume (PV) : pvcreate /dev/sdd1
  • extend the LVM volume group (VG) : vgextend vg_data /dev/sdd1
  • extend the LVM logical volume (LV) :
    lvextend -l +100%FREE /dev/vg_data/lv_data
  • identify the /data file system type (for CentOS 7.2 based appliance the type is xfs) : cat /etc/fstab |grep /data
    
    Image Added
    
    
  • resize the file system according to the file system type :
  • ext4 : resize2fs /dev/vg_data/lv_data
  • xfs : xfs_growfs /dev/vg_data/lv_data
    
    Image Added
    
    
  • Display the new  size of mount point / data : df -h /data
    
    Image Added

Update the Store Configuration File

...