New Features v1.0.5
...
| Component | Issue | Description |
|---|---|---|
| Performance / Security | MNTR-403 MNTR-649 | Upgraded ES to 2.4.4 Upgraded TomEE to 1.7.4 |
| Performance | MNTR-660 MNTR-659 MNTR-699 MNTR-733 | Removed Optimizer script introduced in (1.0.4) and implemented all its improvements as built inside the new ISO file / upgrade procedure. |
| Install | MNTR-432 MNTR-447 MNTR-668 MNTR-696 MNTR-727 MNTR-751 | Developer Edition - version data is incorrect 1.02 ISO generated wrong string in version.txt installation failure for Non Appliance if kibana is not installed |
| Security | MNTR-658 | When LDAP is enabled, built-in roles shouldn't display users and groups |
| Security | MNTR-708 | LDAP not working with custom group attribute |
| Install | MNTR-723 | License generation failed |
| Performance | MNTR-750 | Under high load some syslog events might have a wrong time causing some transactions to stay in "In Process" state- CRITICAL |
| Install | MNTR-340 | Different active MQ installations used the same path to persist messages |
| Alerts | MNTR-466 | Minor UI defects |
| UI | MNTR-510 | An MPGW transaction with invalid json request might not appear in the UI |
| UI | MNTR-511 | Transaction not listed when message rejected by filter which is the first action |
| Config Sample | MNTR-490 | Added a new filter (object type) to "enabled but down dashboard" |
| UI | MNTR-725 | When a login is required again, the user is not directed to the same page they were on |
| UI | MNTR-729 | Notify users to run removal scripts (as mentioned in documentation) to complete the removal of a monitored device from DPOD. |
| Alerts / Reports | MNTR-748 MNTR-755 | Syslog / Email sender was not thread safe and caused unwanted behavior under load |
| UI | MNTR-769 | Filter out Internal transactions (transactions the are lower than 1000 or like "webapi-internal") from the Transaction List panel. These transactions will be counted as transactions in dashboards |
| UI | MNTR-224 | When a transaction failed on backend connection add the BE URL to the Error analysis summary. |
| Management | MNTR-823 | Application services may fail if started using app-util and SSH session is terminated |
Known Issues
| Component | Issue | Description |
|---|---|---|
...
| Component | Issue | Description |
|---|---|---|
Alerts | MNTR-589 MNTR-599 MNTR-598 | Add new alert based on any Gateway syslog error code. Error code can be edited by user. Add new alerts to notify when 1000 transaction in the last 10 min ean with open probes. Add new alert to notify on Certificate that are going to be expired in the next 30 days and are already expired in the last 7 days - Daily alerts |
| HA | MNTR-586 MNTR-584 | Add documentation to describe HA deployment options - See documentation. Change IP address for all registered DataPower Gateways' Log Target created by DPOD to send information to secondary DPOD installation. |
| Management | MNTR-118 | DPOD installation configure with built-in user repository allows its users to change their own passwords. |
Internal Health Alerts | MNTR-537 MNTR-633 MNTR-645 MNTR-641 | Add internal health alert component. For more details read here. |
| Performance | MNTR-539 MNTR-578 MNTR-580 MNTR-581 MNTR-583 | Improve DPOD performance to support up to 1500 TPS in one single dedicated server with specific HW configuration as described in Hardware and Software Requirements. To reach this level of capacity a special step is required when an Optimizer script must run after install. |
| B2B | MNTR-556 | Show AS2 FSH in down objects but enabled Dashboards. |
| Install | MNTR-568 MNTR-553 MNTR-475 | Support Docker containers for Developer Edition only. |
| Presale | MNTR-596 | Providing Sizing tool to run in customer device and gather statistics |
| Security | MNTR-590 MNTR-533 MNTR-612 MNTR-606 | Provide assisting script to configure LDAP - LDAP Configuration Script. |
| WS-M Agent | MNTR-636 | Limit payload capture size when collected by DP Gateway (default to 10MB) - requires firmware 7.5.2.4 |
| UI | MNTR-557 | Add a new API to add a monitored device to DPOD to assist integrate DPOD in a DevOps implementation. |
...
| Component | Issue | Description |
|---|---|---|
| Performance | MNTR-577 MNTR-567 MNTR-534 MNTR-526 MNTR-535 MNTR-583 | Store performance improvements |
| HA | MNTR-585 | Sync Store and DB with new Attached Gateway after move from Primary to Secondary DPOD installation in Active/Passive Scenario |
UI | MNTR-625 MNTR-635 | Transaction with callable rule invocation might appear several times on Transaction List screen. Requires firmware 7.5.2.4 |
| UI | MNTR-89 | Add last /first buttons to transaction list (limited to 10K results). |
| Performance | MNTR-438 | Static / Cache data was flushed under load causing temporary data loss |
| UI | MNTR-284 | Filter internal DPOD keep alive message from Raw messages panels |
| Performance / Security | MNTR-252 MNTR-210 | DPOD was upgraded to be compiled and run with Java 8 u121 |
| Restart Analysis | MNTR-494 | On an unexpected device restart the down time displayed is too long |
UI | MNTR-189 | Extended Latency tab moved to transaction page to support customer's with small resolution screens |
| UI | MNTR-297 | Add validation of IPv4/IPv6 format to monitored device host and log target source address properties . |
| WS-M Agents | MNTR-528 | Bind a WS-M agent to a domain was persisted. |
| Performance | MNTR-540 | Static data on an index should be persist once index is no longer active. |
| Store Retention | MNTR-569 MNTR-639 MNTR-562 MNTR-613 | Provide script to adjust store size after a change of capacity was performed to /data filesystem |
| Performance / Agents | MNTR-591 MNTR-593 MNTR-594 MNTR-567 | Add cache to parsing patterns. Improved performance and logging for Interceptor. Improve logging to identify bottlenecks as they occurred. |
| UI | MNTR-572 | Prevent Extended transaction to be configure on API-C domains |
| UI | MNTR-619 MNTR-199 | Trim filters such device , domain to enhance user experience |
Security UI | MNTR-294 | Prevent deletion of the last user with administrative rights. |
| Performance | MNTR-622 | Under high load some syslogs events might have a wrong time causing some transactions to stay in "In Process" state- CRITICAL |
| Performance / Agents | MNTR-623 MNTR-617 MNTR-632 | Improve records order in Raw Messages inside a single Transaction screen based on a microsecond precision. Requires firmware 7.5.2.4 |
| Security | MNTR-628 | Add LDAP password encryption. |
| Sample Config | MNTR-630 | Increase Object's Name size limit to support B2B object with long names. |
| UI | MNTR-482 | MPGW HTTP GET transaction not displayed when "Process Messages Whose Body Is Empty" is off. Requires firmware 7.5.2.4 |
| Alerts | MNTR-428 | After executing an alert, the execution history record was not fully complete in Store. |
| Reports | MNTR-157 | When the report has 0.0 - the value is left aligned in the cell |
| WS-M Agent | MNTR-527 MNTR-618 | Fail processing WSM Payload with two backend-message elements |
| Install | MNTR-460 | Fix documentation on how to add a second network card to DPOD as described at Scenario 2 : All-In-One with two network interfaces |
| UI | MNTR-456 MNTR-254 | Improve error messages Improve logs |
| Install | MNTR-524 MNTR-536 | Create REST API for registering WSM and SYSLOG agents. Add automation support for multi server topology. |
| UI / Agents | MNTR-5 MNTR-621 | Transactions starting with MQ were not always displayed in Transaction lists. |
| Install | MNTR-547 | Add documentation on how change the default agents port in AIO installation |
| Syslog Agents | MNTR-637 MNTR-641 | When system reach its Store throughput capacity all new syslog request were blocked causing dropped events on Gateway syslog targets. Now this events will be discarded and an new counter and dashboard is added for each agents to manage this dropped events scenario. |
| Install | MNTR-325 MNTR-532 MNTR-561 MNTR-544 | Improve must gather and process diagnostics |
...