IBM DataPower Operations Dashboard contains an extensive set of parameters that let administrators fine-tune the system's behavior to the installation requirements.
The following sections describe these parameters in detail.
...
| Parameter | Category | Default Value | Description |
|---|---|---|---|
| Enable Queries Emails SMTP | Alerts | true | Enable / Disable publishing alerts via SMTP server |
| Enable Queries Emails SMTP WS | Alerts | false | Enable / Disable publishing alerts via Web Service |
| Fields to Ignore in ElasticSearch Response in Alerts | Alerts | doc_count_error_upper_bound,sum_other_doc_count | Field to omit from alert description |
| Enable Queries Output File | Alerts | false | Enable / Disable publishing alerts as file in local file system |
| Syslog Severity Field Value | Alerts | info | Syslog record message level. Possible values: debug, info, notice, warning, err, crit, alert, emerg |
| Alerts Syslog Server Hostname | Alerts | 172.77.77.7 | Syslog server hostname or IP address. |
| Alerts Syslog Server Port | Alerts | 60031 | Syslog server listening port. |
...
Parameter | Category | Default Value | Description |
|---|---|---|---|
From Address | from@example.com | The from address used for the report email. | |
SMTP Host | Email SMTP | smtp.example.com | Destination SMTP host |
SMTP Password | Email SMTP | ******** | Password for logging in to the SMTP host. If no authentication required leave this field empty. |
SMTP Port | Email SMTP | 465 | Destination SMTP host port |
SMTP User | Email SMTP | mailer@example.com | Username for logging in to the SMTP host. If no authentication required leave this field empty. |
| SMTP SSL Enabled | Email SMTP | true | Enable / Disable TLS/SSL |
SMTP WS Endpoint URI | Email SMTP WS | /SMTPSender | Destination URI for sending reports via Web-Service |
SMTP WS Host | Email SMTP WS | localhost | Destination hostname for sending reports via Web-Service |
SMTP WS Port | Email SMTP WS | 8080 | Destination port for sending reports via Web-Service |
SMTP WS Protocol | Email SMTP WS | HTTP | Protocol for accessing the Web-Service host Valid values: HTTP / HTTPS |
SMTP WS User | Email SMTP WS | user | User used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication. |
SMTP WS Password | Email SMTP WS | ******** | Password used for sending reports via Web-Service. This value is sent using HTTP Basic Authentication. |
...
The following parameters control configuration and connection to an LDAP registry, used for role-based security.
All parameters below are mandatory when enabling LDAP role-based security (by switching on the Enable LDAP parameter).
If LDAP RBM is disabled, all these parameters should be left blank.
...
Parameter
...
Category
| Warning |
|---|
The LDAP parameters should not be altered manually and should exactly match the values in the services configuration files. |
Parameter | Category | Default Value | Description | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Enable LDAP | LDAP | false | Whether the LDAP RBM is enabled. Valid Values: true / false | See LDAP Configuration Script | ||||||||||||||
| LDAP Connection URLs | LDAPOne or more LDAP server address(es), separated by commas | See LDAP Configuration Script | ||||||||||||||||
| Enable LDAP Host Name Verification | LDAP | true | Enable host name verification of certificates when using LDAPS | LDAPSee LDAP Configuration Script | ||||||||||||||
LDAP Connection Name (DN) | LDAPUsername for connecting to the LDAP server (sometimes called “bind user”) | |||||||||||||||||
LDAP Connection Password | LDAPPassword for connecting to the LDAP server | |||||||||||||||||
LDAP Referral (ignore/follow) | LDAP | ignore | Define handling of JNDI referrals (see javax.naming.Context.REFERRAL for more information).
Microsoft Active Directory often returns referrals. Set this parameter to follow If your installation is required to follow them. Caution: if your DNS is not part of AD, the LDAP client lib might try to resolve your domain name in DNS to find another LDAP server. | LDAP User Search Base | LDAP | Location of user objects in the LDAP tree | LDAP User Search Filter | LDAP | The LDAP filter (using LDAP filter syntax) to search for usera user by its name, Use {0} as a placeholder for the user name entered in the login page | LDAP User Name Attribute Name | LDAP | The user attribute name that contains the name of that user (as entered in the login page) | LDAP Group Search Base | LDAP | Location of group objects in the LDAP tree | LDAP Group Membership Search Filter | LDAP | The LDAP filter (using LDAP filter syntax) to search for groups by a member user or a member group (in case of nested search), Use {0} as a placeholder for the full DN of the member user or the member group (in case of nested search)See LDAP Configuration Script |
| LDAP User Search Base | LDAP | See LDAP Configuration Script | ||||||||||||||||
| LDAP User Search Filter | LDAP | See LDAP Configuration Script | ||||||||||||||||
LDAP User Name Attribute Name | LDAP | |||||||||||||||||
| LDAP Group Search Base | LDAP | See LDAP Configuration Script | ||||||||||||||||
| LDAP Group Membership Search Filter | LDAP | See LDAP Configuration Script | ||||||||||||||||
LDAP Group Membership Search Nested | LDAP | trueSearch for nested group membership (groups within groups)Search nested group members | ||||||||||||||||
| LDAP Group Name Search Filter | LDAP | The LDAP filter (using LDAP filter syntax) to search for a group by its name, usually by the "cn" attribute, Use {0} as a placeholder for the group nameSee LDAP Configuration Script | ||||||||||||||||
LDAP Group Name Attribute Name | LDAP | cn | The group attribute name that contains the name of that group |
...
Monitored Devices Authentication
...
| Parameter | Category | Default | Description |
|---|---|---|---|
| Internal Alerts - Check Agents Interval in Seconds | Health | 300 | How often to check whether DPOD's syslog and WS-M agents are up and working |
| Internal Alerts - Check Derby Interval in Seconds | Health | 300 | How often to check whether DPOD's internal database is up and working |
| Internal Alerts - Check Dropped Syslogs Interval in Seconds | Health | 600 | How often to check whether DPOD's syslog agents lost incoming messages |
| Internal Alerts - Check Dropped WS-M Messages Interval in Seconds | Health | 600 | How often to check whether DPOD's WS-M agents lost incoming payloads |
| Internal Alerts - Check ES Interval in Seconds | Health | 300 | How often to check whether DPOD's big data component is up and working |
| Internal Alerts - Check File System Interval in Seconds | Health | 300 | How often to check whether DPOD's filesystem is out of space |
| Internal Alerts - Check Retention Interval in Seconds | Health | 300 | How often to check whether DPOD's internal big data retention process is working |
| Internal Alerts - Check Log Targets Misconfig Interval in Seconds | Health | 43200 | How often to check whether the monitored gateways for misconfigured DPOD log targets |
| Internal Alerts - Send Email on Alert | Health | false | Whether or not to send an Email when a problem was detected by the internal health monitoring |
| Internal Alerts - Email Destination Address for Alerts | Health | No Default | Destination Email address for sending internal health alerts |
| Internal Alerts - Send Syslog on Alert | Health | false | Whether or not to send a Syslog message when a problem was detected by the internal health monitoring |
| Interval in Seconds to Sample Logging Targets | Health | 300 | How often to sample DPOD's log targets in the monitored devices |
| Interval in Seconds to Sample Nodes Health Statistics | Health | 300 | How often to collect statistics on DPOD's big data nodes |
| Interval in Seconds to Monitor Objects Status | Health | 300 | How often to monitor enabled but down objects in the monitored devices |
| Object Status Monitor Class List (All, Default or a Custom List) | Health | Default | By default, the Failed Objects dashboard (under the "explore" menu) displays only common object classes, |
| Interval in Seconds to Sample WSM Agents Statistics | Health | 300 | How often to sample WS-M Agents in the monitored devices |
| Internal Alerts REST API Service Host | Health | localhost | Host name / IP address of the maintenance housekeeping server to save and publish internal alerts. |
| Internal Alerts REST API Service Port | Health | 8084 | Port of the maintenance housekeeping service to save and publish internal alerts. |
...