...
- VMWare ESX v5.5 , v6.0, v6.5
- VMWare Player - v12.0 , v12.5
- VMWare Workstation - v12.0 , v12.5 5, v14
- VMware Fusion v8.0
- PureApp (only on Intel Processors) - no pattern yet available, can be provided only as an imported OVA.
- For Hyper V support - contact your IBM sales representatives.
...
Five load configuration architecture setups that exist for the Standard Edition are available in:
- Appliance Mode (ISO file) - DPOD_CentOS_<version>.iso (Can be download from PPA) - for example: DPOD_CentOS_1.0.48.5.iso
Non-Appliance Mode (Compressed Executable file) - DPOD_RedHat_<version>.cef (Can be download from PPA) - for example: DPOD_CentOS_1.0.38.5.cef
The following table lists the typical usage characteristics for each setup edition, and the physical or virtual resources it requires.
...
Operating System Requirements - Only applicable to Non Appliance mode
- CentOS 7.5.0/ 7.4.0 / 7.2.0 - x86-64 bit or RHEL 7.2.0 /7.4.0/7.5.0 - x86-64 bit only on supported HW or Hypervisor as stated above. (7.3 is not Supported. 7.2 will be out of support in 2019H2 )
- Server OS must be a fresh install without any other installed products .
- In Non Appliance mode the OS support is not covered but recommendations will be provided.
- Other 3rd party software products for backups, security and monitoring may be installed. However, due to diversity their impact is unknown.
- During resolution of issues, DPOD support will ask the customer to disable these 3rd party tools, so that issues may be isolated and DPOD verified as their source. Support will not be provided if the 3rd party tools are not disabled.
...