Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

...

  1. DPOD cell manager and cell members must be with the same version (minimum version is v1.0.9.0).
  2. DPOD cell manager can be installed in both Appliance Mode or Non-Appliance Mode with Medium Load architecture type, as detailed in the Hardware and Software Requirements. The manager server can be both virtual or physical.
  3. DPOD cell member (FCM) should be installed in Non-appliance Mode with High_20dv with High Load architecture type, as detailed in the Hardware and Software Requirements.
  4. Each cell component (manager / FCM) should have two network interfaces:
    1. External interface - for DPOD users to access the Web Console and for communication between DPOD and Monitored Gateways.
    2. Internal interface - for internal DPOD components inter-communication (should be a 10Gb Ethernet interface).
  5. Network ports should be opened in the network firewall as detailed in table 1 below:

...

  1. below:

From

To

Ports (Defaults)

Protocol

Usage

DPOD Cell Manager

DPOD Appliance  

Each Monitored Device

5550 (TCP)

HTTP/S

Monitored

Device

device administration management interface

DPOD Cell Manager

DPOD Appliance  

DNS Server

TCP and UDP 53

DNS

DNS services. Static IP address may be used.

DPOD Cell Manager

DPOD Appliance  

NTP Server

123 (UDP)

NTP

Time synchronization

DPOD Cell Manager

DPOD Appliance  

Organizational mail server

25 (TCP)

SMTP

Send reports by email

DPOD Cell Manager

DPOD Appliance  

LDAP

TCP 389 / 636 (SSL).

TCP 3268 / 3269 (SSL)

LDAP

Authentication & authorization. Can be over SSL.

DPOD Cell Manager
DPOD Appliance  
Each of the
Each DPOD Cell Member
DPOD Appliance
9300-9305 (TCP)
Elasticsearch
ElasticSearch
Elasticsearch
ElasticSearch Communication (data + management)

NTP Server

Cell Manager DPOD Appliance  

123 (UDP)

NTP

Time synchronization

Each Monitored Device

DPOD Cell Manager

DPOD Appliance  

60000-60003 (TCP)

TCP

SYSLOG Data

Each Monitored Device

DPOD Cell Manager

DPOD Appliance  

60020-60023 (TCP)

HTTP/S

WS-M Payloads

FROM Users IPs         

DPOD Cell Manager

DPOD Appliance  

443 (TCP)

HTTP/S

Access to with IBM DataPower Operations Dashboard Console

FROM Admins IPs         

DPOD Cell Manager

DPOD Appliance  

22 (TCP)

TCP

SSH

Cell Member DPOD Appliance   DPOD Cell Manager
DPOD Appliance  
9200, 9300-9400ElasticsearchElasticsearch Communication (data + management)

Cell Member DPOD Appliance   

DNS Server

TCP and UDP 53

DNS

DNS services

Cell Member DPOD Appliance   

NTP Server

123 (UDP)

NTP

Time synchronization

NTP Server

Each DPOD Cell Member

DPOD Appliance   

123 (UDP)

NTP

Time synchronization

Each Monitored Device

Each DPOD Cell Member

DPOD Appliance   

60000-60003 (TCP)

TCP

SYSLOG Data

Each Monitored Device

Each DPOD Cell Member

DPOD Appliance   

60020-60023 (TCP)

HTTP/S

WS-M Payloads

FROM Admins IPs         

Each DPOD Cell Member

DPOD Appliance   

22 (TCP)

TCP

SSH



Manager Installation

DPOD cell manager can be both "Appliance Mode" or "Non Appliance Mode" installation with "medium" architecture type as detailed in the Hardware and Software Requirements. The manager server can be both virtual or physical. 

...