...
- The DPOD cell manager and cell FCM must be with the same version (minimum version is v1.0.9.0 )
- DPOD ce ll manager can be both "Appliance Mode" or "Non Appliance Mode" installation with "medium" architecture type as detailed in the Hardware and Software Requirements. The manager server can be both virtual or physical.
- DPOD cell member (FCM) should be "Non appliance Mode" installation with "High_20dv with High Load" architecture type as detailed in the Hardware and Software Requirements
- Each cluster component (manager / FCM ) should have two network interfaces :
- External interface - for DPOD users to access UI and for communication between DPOD and Monitored Gateways.
- Internal Interface - for internal DPOD components communication (should be 10GB Ethernet interface, for more information see configuring FCM)
- Each installation will requires some different ports to be opened in the firewall - see table 1
| Anchor | ||||
|---|---|---|---|---|
|
From | To | Ports (Defaults) | Protocol | Usage |
|---|---|---|---|---|
Cell Manager DPOD Appliance | Each Monitored Device | 5550 (TCP) | HTTP/S | Monitored Device administration management interface |
Cell Manager DPOD Appliance | DNS Server | TCP and UDP 53 | DNS | DNS services. Static IP address may be used. |
Cell Manager DPOD Appliance | NTP Server | 123 (UDP) | NTP | Time synchronization |
Cell Manager DPOD Appliance | Organizational mail server | 25 (TCP) | SMTP | Send reports by email |
Cell Manager DPOD Appliance | LDAP | TCP 389 / 636 (SSL). TCP 3268 / 3269 (SSL) | LDAP | Authentication & authorization. Can be over SSL |
NTP Server | Cell Manager DPOD Appliance | 123 (UDP) | NTP | Time synchronization |
Each Monitored Device | Cell Manager DPOD Appliance | 60000-60003 (TCP) | TCP | SYSLOG Data |
Each Monitored Device | Cell Manager DPOD Appliance | 60020-60023 (TCP) | HTTP/S | WS-M Payloads |
FROM Users IPs | Cell Manager DPOD Appliance | 443 (TCP) | HTTP/S | Access to with IBM DataPower Operations Dashboard Console |
FROM Admins IPs | Cell Manager DPOD Appliance | 22 (TCP) | TCP | SSH |
Cell Member DPOD Appliance | DNS Server | TCP and UDP 53 | DNS | DNS services |
Cell Member DPOD Appliance | NTP Server | 123 (UDP) | NTP | Time synchronization |
NTP Server | Cell Member DPOD Appliance | 123 (UDP) | NTP | Time synchronization |
Each Monitored Device | Cell Member DPOD Appliance | 60000-60003 (TCP) | TCP | SYSLOG Data |
Each Monitored Device | Cell Member DPOD Appliance | 60020-60023 (TCP) | HTTP/S | WS-M Payloads |
FROM Admins IPs | Cell Member DPOD Appliance | 22 (TCP) | TCP | SSH |
Manager Installation
DPOD cell manager can be both "Appliance Mode" or "Non Appliance Mode" installation with "medium" architecture type as detailed in the Hardware and Software Requirements. The manager server can be both virtual or physical.
...
| Note |
|---|
User should reboot the server for the new performance optimization should take effect. |
Cell Member Federation
In order to configure the local node and remote collector(s), run the following script in the local node once per remote collector .
...