Versions Compared

Key

  • This line was added.
  • This line was removed.
  • Formatting was changed.

The user preferences can be accessed by clicking the user name on the Banner, and selecting Preferences from the drop-down list.

...

Preference NameBehavior
ThemeDPOD provides two User Interface themes.
You may choose a light or dark theme for DPOD’s display 
IDG Home PageLets you configure the page DPOD loads when you log in to the system in DataPower view mode or when switching to DataPower view mode
and when an auto-navigate Home Interval is used
APIC Home PageLets you configure the page DPOD loads when you log in to the system in APIC view mode or when switching to APIC view mode
and when an auto-navigate Home Interval is used
Auto-reload Interval

When used, DPOD will automatically reload its display according to the interval selected:

  • Every 10 Seconds
  • Every 30 Seconds
  • Every 5 Minutes
  • Or manually (Never auto-reload)

The auto-reload interval selection can also be accessed directly from the banner,
by clicking the auto-reload icon

Auto-navigate Home Interval

Number of seconds of inactivity after which DPOD will reload the home page.
If set, DPOD will navigate the user back to the defined home page after a period of inactivity.

An example of where this is useful would be for NOC display terminals

Internal Alerts Message Interval

This option is only displayed for administrators.

How often internal health notifications will be displayed
The default value is every 1 minute, you can turn the notification off (not recommended)

Store Status Message Interval

This option is only displayed for administrators.

How often the Store status message should be displayed.
The store status message shows the date of the earliest syslog document stored in DPOD.
The default value is every 8 hours, you can turn the notification off.

Default Device FilterYou may enter device name(s) here to automatically set a default Device Filter value for all views. 
Default Domain FilterYou may enter domain name(s) here to automatically set a default Domain Filter value for all views.
Default Service FilterYou may enter service name(s) here to automatically set a default Service Filter value for all views.

...