...

Prerequisites

The DataPower Operations Dashboard Cloud Agent Operator currently supports installation via OLM, see Prerequisites for supported versions.

Installation Mode

When installing an operator via OLM, there are two options for the Installation Mode:

...

Available Versions

Loading Images to a Container Registry

DPOD Cloud Agent images are currently available for download from Passport Advantage (PPA) and need to be loaded to a container registry, so they can be pulled by your Kubernetes cluster. The container registry may be any external registry which is accessible to the cluster, or the cluster’s internal registry.

...

1. Set variables with the source, destination, versions, etc.:

   Code Block

   DPOD_CLOUD_AGENT_NAMESPACE="dpod-cloud-agent" CONTAINER_REGISTRY_EXTERNAL_URL="default-route-openshift-image-registry.apps.ocp4.mycluster.com" CONTAINER_REGISTRY_INTERNAL_URL="image-registry.openshift-image-registry.apps.ocp4.mycluster.com" DPOD_CLOUD_AGENT_VERSION="1.0.19.0" DPOD_CLOUD_AGENT_OPERATOR_VERSION="0.1.0" DPOD_CLOUD_AGENT_IMAGE_TAG=${DPOD_CLOUD_AGENT_VERSION}-amd64" DPOD_CLOUD_AGENT_OPERATOR_IMAGE_TAG="${DPOD_CLOUD_AGENT_OPERATOR_VERSION}-amd64" IMAGES_DIR="/tmp" USER_ID="admin"

2. Load the operator catalog and bundle images to openshift-marketplace namespace:

   Code Block

   skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-operator-catalog-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/openshift-marketplace/dpod-cloud-agent-operator-catalog:${DPOD_CLOUD_AGENT_OPERATOR_IMAGE_TAG} skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-operator-bundle-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/openshift-marketplace/dpod-cloud-agent-operator-bundle:${DPOD_CLOUD_AGENT_OPERATOR_IMAGE_TAG}

3. Load the operator image to the DPOD Cloud Agent namespace (for namespace scope deployment) or to the openshift-operators namespace (for cluster scope deployment):

   Code Block

   # if Installation Mode is "AllNamespaces" (cluster scope), use openshift-operators # if Installation Mode is "OwnNamespace" (namespace scope), use ${DPOD_CLOUD_AGENT_NAMESPACE} DPOD_CLOUD_AGENT_OPERATOR_NAMESPACE=${DPOD_CLOUD_AGENT_NAMESPACE} skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-operator-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/${DPOD_CLOUD_AGENT_OPERATOR_NAMESPACE}/dpod-cloud-agent-operator:${DPOD_CLOUD_AGENT_OPERATOR_IMAGE_TAG}

4. Load application images to the DPOD Cloud Agent namespace:

   Code Block

   skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-api-proxy-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/${DPOD_CLOUD_AGENT_NAMESPACE}/dpod-cloud-agent-api-proxy:${DPOD_CLOUD_AGENT_IMAGE_TAG} skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-http-ingester-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/${DPOD_CLOUD_AGENT_NAMESPACE}/dpod-cloud-agent-http-ingester:${DPOD_CLOUD_AGENT_IMAGE_TAG} skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-manager-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/${DPOD_CLOUD_AGENT_NAMESPACE}/dpod-cloud-agent-manager:${DPOD_CLOUD_AGENT_IMAGE_TAG} skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-messaging-broker-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/${DPOD_CLOUD_AGENT_NAMESPACE}/dpod-cloud-agent-messaging-broker:${DPOD_CLOUD_AGENT_IMAGE_TAG} skopeo copy --all --dest-creds=${USER_ID}:$(oc whoami -t) docker-archive:${IMAGES_DIR}/dpod-ca-syslog-ingester-${DPOD_CLOUD_AGENT_VERSION}.tgz \ docker://${CONTAINER_REGISTRY_EXTERNAL_URL}/${DPOD_CLOUD_AGENT_NAMESPACE}/dpod-cloud-agent-syslog-ingester:${DPOD_CLOUD_AGENT_IMAGE_TAG}

Creating / Updating the ImageContentSourcePolicy

The DPOD Cloud Agent operator will deploy containers with images referencing to IBM’s cp.icr.io/cp/dpod container registry. Since the images are currently loaded into your own container registry (and are not still available in the IBM container registry), a mirroring is required to be configured using the ImageContentSourcePolicy resource.

...

Installing the CatalogSource

Use the following YAML example to create a CatalogSource for the DPOD Cloud Agent (typically CatalogSources are created in the openshift-marketplace namespace):

...

Using the OpenShift Console

To create the CatalogSource resource using the OpenShift Console, use the following steps:

1. Navigate to the OpenShift Console UI.

2. In the top-right of the UI, on the header bar, click the Import button (+) to import YAML.

3. Copy and paste the above YAML example into the editor.

4. Click the Create button to create the resource.

Using the OCP CLI (oc)

To create this resource using the oc CLI, use the following steps:

1. Create a YAML file containing the above YAML example.

2. Use the oc apply command to apply the YAML resource:

   Code Block
   oc apply -f ibm-datapower-operations-dashboard-operator-catalog.yaml

Validating that the CatalogSource is Installed and Ready

To validate that the CatalogSource resource was installed correctly, use the following steps.

Validate that the CatalogSource pod is ready

use the following oc command to get the CatalogSource pod status and verify the status is READY:

oc get catalogsource ibm-dpod-cloud-agent-catalog -n openshift-marketplace -o yaml | yq read - "status.connectionState.lastObservedState"

Validate that the CatalogSource was processed into OperatorHub

1. Navigate to the OpenShift Console UI.

2. On the left panel, expand the Operators section.

3. Select OperatorHub.

4. At the top of the OperatorHub section, enter datapower operations dashboard into the Filter search box.

5. A tile should be shown titled IBM DataPower Operations Dashboard Cloud Agent.

Installing the DPOD Cloud Agent Operator

To install the DPOD Cloud Agent Operator use the following steps:

Using the OpenShift Console

1. Use the previous steps to locate the IBM DataPower Operations Dashboard Cloud Agent Operator tile in the OperatorHub UI.

2. Select the IBM DataPower Operations Dashboard Cloud Agent tile. A panel to the right should appear.

3. Click the Install button on the right panel.

4. Under Installation Mode select your desired installation mode.

5. Select the desired Update Channel.

6. Select the desired Approval Strategy.

7. Click the Subscribe button to install the IBM DataPower Operations Dashboard Cloud Agent Operator.

Using the OCP CLI (oc)

To create the DPOD Cloud Agent Operator subscription using the oc CLI, use the following steps:

...

1. Create a YAML file containing the above YAML example.

2. Use the oc apply command to apply the YAML resource.

   Code Block
   oc apply -f ibm-datapower-operations-dashboard-cloud-agent-operator.yaml

DPOD Cloud Agent Network Configuration

The Cloud Agent sends and receives data to / from the DataPower Operations Dashboard instance which is installed outside the Kubernetes cluster.

...

• NodePort - (default) The Cloud Agent operator will create services with the type of NodePort to expose the services externally to OCP.

• Custom - The Cloud Agent operator will not create any resources for exposing the services externally to OCP, and it is the user’s responsibility to create, update and delete these resources (e.g.: Ingress controller, LoadBalancer services, etc.). For more information, see the Kubernetes documentation.
  For route, configuration see OCP Route documentation.
  For ingress configuration see Kubernetes Ingress documentation.

Cloud Agent Inbound (ingress) Communication

The Cloud Agent inbound communication includes:

• Management API invocation generated by DataPower Operations Dashboard to the managercomponent of the Cloud Agent.

• Kafka communication to the messaging component of the Cloud Agent (messaging brokers).

Manager

The manager component has a number of properties (in the Cloud Agent CR) for controlling the communication:

...

For more information, see Manager API documentation.

Messaging

The messaging component has a number of properties (in the Cloud Agent CR) for controlling the communication:

...

• <CR name>-msg-bse-svc - A NodePort service for externally accessing the messaging bootstrap port.

• <CR name>-msg-dir-svc-<broker number> - A NodePort service for each messaging broker (starting with zero) for external direct access to this broker, which uses port externalPortStart +1 (e.g.: 30101, 30102, etc).

Deploying the DPOD Cloud Agent Instance

In order to deploy the DPOD Cloud Agent instance, a CustomResource should be created.

...

apiVersion: integration.ibm.com/v1beta1
kind: DpodCloudAgent
metadata:
  namespace: integration
  name: dpod-cloud-agent-prod
spec:
  discovery:
    namespaces:
      - datapower-gateways-ns
  license:
    accept: true
    license: L-GHED-75SD3J
    use: Production
  manager:
    externalHost: dpod-cloud-agent-manager.apps.ocp10.mycluster.com
  messaging:
    externalHost: dpod-cloud-agent-messaging.apps.ocp10.mycluster.com
    storage:
      className: app-storage
  version: 1.0.19.0

Validating the Cloud Agent Instance

Using the OpenShift Console

To validate the CustomResource using the OpenShift Console, use the following steps.

1. Navigate to your OpenShift Console UI.

2. Navigate to Installed Operators and choose IBM DataPower Operations Dashboard Cloud Agent.

3. Click on DpodCloudAgent tab and make sure the new CustomResource is in Running Phase.

Using the OCP CLI (oc)

To validate the CustomResource using the oc CLI, use the following steps.

...