Page Comparison

...

1. Stop DPOD components 

2. Ensure all components are down

3. Disable all DPOD services except Derby, UI and Reports

   1. Edit (with vi) /etc/sysconfig/MonTier and find the line starting with

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby MonTier-es-raw-trans-Node-1"

      and remove all components except for MonTier-Derby:

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby"

      
      

   2. Comment out the following lines:

      Code Block
      SERVICES_SECOND_GROUP="MonTier-es-raw-trans-Node ..." SERVICES_THIRD_GROUP="MonTier-HK-ESRetention" ... SERVICES_FORTH_GROUP="MonTier-AggAgent- ..." SERVICES_FIFTH_GROUP="MonTier-BalancerAgent ..." SERVICES_SIXTH_GROUP="MonTier-WsmAgent-1 ..."

      
      

   3. Change 

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports MonTier-HK-WsmKeepalive MonTier-HK-SyslogKeepalive"

      to remove all components except MonTier-UI and MonTier-Reports
      

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports"

      
      

4. Change DPOD's Elastic Search alias entry in /etc/hosts to direct to the internal console:

   Code Block
   vi /etc/hosts

   Change the line that directs montier-es and montier-es-http to point to the internal Console IP Address (1.1.1.1 in the example below)

   Code Block
   1.1.1.1 montier-es

   Edit DPOD UI configuration file:

   Code Block
   vi /app/ui/MonTier-UI/conf/MonTierUI.conf

   and change the port on the following line

   Code Block
   elasticsearch.discovery.zen.ping.unicast.hosts=montier-es:9300

   to the new port

   Code Block
   elasticsearch.discovery.zen.ping.unicast.hosts=montier-es:9302

   Comment out the following lines:

   Code Block
   elasticsearch.node.name=MonTier-UI elasticsearch.network.host=montier-es-http elasticsearch.transport.tcp.port=9320 elasticsearch.http_node.host=montier-es-http elasticsearch.http_node.port=9200 1.1.1.1 montier-es-http

   
   

5. Start configuration database service

   Code Block
   start_services.sh -o derby ij

   
   

6. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name='agents.management.enabled';

   
   

7. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name = 'system.internal_self_service.is_internal';

   
   

8. If you wish to let the external self service users access the DevOps Services Portal, change the following system parameters in the external self service console:
   a. Internal Self Service Address - enter the address of the internal self service portal
   b. Internal Self Service User Name - the DPOD user name that will be used to access the internal portal - it is recommended to create a new user for this purpose
   c. Internal Self Service Password - the password for the user that will be used to access the internal portal
   d. Internal Self Service Webserver Port - (defaults to 443) the webserver port for the internal self service portal - change this value only if advised.

...

1. Stop DPOD components

2. Ensure all components are down :

3. Change DPOD ElasticSearch alias entry in /etc/hosts to bind to external IP address

   Code Block
   vi /etc/hosts

   and change the line 

   Code Block
   127.0.0.1 montier-es

   to DPOD's internal console IP address (e.g. 1.1.1.1)

   Code Block
   1.1.1.1 montier-es 1.1.1.1 montier-es-http

   
   

4. Start DPOD components

5. Ensure all components are up and running

   Code Block

   app_status.sh #Output Example: MonTier-AppAdmin (pid 17836) is running... MonTier-Derby (pid 17940) is running... MonTier-es-raw-trans-Node-1 (pid 18125) is running... MonTier-es-raw-trans-Node-2 (pid 21122) is running... MonTier-es-raw-trans-Node-3 (pid 21103) is running... MonTier-es-raw-trans-Node-4 (pid 21120) is running... MonTier-SyslogAgent-1 (pid 27350) is running... MonTier-SyslogAgent-2 (pid 27286) is running... MonTier-SyslogAgent-3 (pid 27177) is running... MonTier-SyslogAgent-4 (pid 27075) is running... MonTier-WsmAgent-1 (pid 27002) is running... MonTier-WsmAgent-2 (pid 26921) is running... MonTier-WsmAgent-3 (pid 26881) is running... MonTier-WsmAgent-4 (pid 26773) is running... MonTier-HK-ESRetention (pid 24012) is running... MonTier-HK-WdpDeviceResources (pid 27590) is running... MonTier-HK-WdpServiceResources (pid 27447) is running... MonTier-HK-SyslogKeepalive (pid 1976) is running... MonTier-HK-WsmKeepalive (pid 1932) is running... MonTier-UI (pid 1635) is running... MonTier-Reports (pid 1830) is running... MonTier-AgentNode (pid 1736) is running...

   
   

...