Page Comparison

...

1. Stop DPOD components 

2. Ensure all components are down

3. Disable all DPOD services except Derby, UI and Reports

   1. Edit (with vi) /etc/sysconfig/MonTier and find the line starting with

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby MonTier-es-raw-trans-Node-1"

      and remove all components except for MonTier-Derby:

      Code Block
      SERVICES_FIRST_GROUP="MonTier-Derby"

      
      

   2. Comment out the following lines:

      Code Block
      SERVICES_SECOND_GROUP="MonTier-es-raw-trans-Node ..." SERVICES_THIRD_GROUP="MonTier-HK-ESRetention" ... SERVICES_FORTH_GROUP="MonTier-AggAgent- ..." SERVICES_FIFTH_GROUP="MonTier-BalancerAgent ..." SERVICES_SIXTH_GROUP="MonTier-WsmAgent-1 ..."

      
      

   3. Change 

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports MonTier-HK-WsmKeepalive MonTier-HK-SyslogKeepalive"

      to remove all components except MonTier-UI and MonTier-Reports
      

      Code Block
      SERVICES_SEVENTH_GROUP="MonTier-UI MonTier-Reports"

      
      

4. Change DPOD's Elastic Search alias entry in /etc/hosts to direct to the internal console:

   Code Block
   vi /etc/hosts

   Change the line that directs montier-es to point to the internal Console IP Address (1.1.1.1 in the example below)

   Code Block
   1.1.1.1 montier-es

   
   

5. Edit DPOD UI configuration file:

   Code Block
   vi /app/ui/MonTier-UI/conf/MonTierUI.conf

   and change the port on the following line

   Code Block
   elasticsearch.discovery.zen.ping.unicast.hosts=montier-es:9300

   to the new port

   Code Block
   elasticsearch.discovery.zen.ping.unicast.hosts=montier-es:9302

   
   

6. Comment out the following lines:

   Code Block
   elasticsearch.node.name=MonTier-UI elasticsearch.network.host=montier-es-http elasticsearch.transport.tcp.port=9320 elasticsearch.http_node.host=montier-es-http elasticsearch.http_node.port=9200

   
   

7. Start configuration database service

   Code Block
   start_services.sh -o derby

   Enter ij to issue SQL commands

   Code Block
   language bash linenumbers true
   ij ij

   
   

8. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name='agents.management.enabled';

   
   

9. Update the SystemParameter SQL table:

   Code Block
   UPDATE SystemParameter SET value='false' WHERE name = 'system.internal_self_service.is_internal';

   
   

10. If you wish to let the external self service users access the DevOps Services Portal, change the following system parameters in the external self service console:
    a. Internal Self Service Address - enter the address of the internal self service portal
    b. Internal Self Service User Name - the DPOD user name that will be used to access the internal portal - it is recommended to create a new user for this purpose
    c. Internal Self Service Password - the password for the user that will be used to access the internal portal
    d. Internal Self Service Webserver Port - (defaults to 443) the webserver port for the internal self service portal - change this value only if advised.

...