...
Available in Edition | Load Configuration Architecture | Goal | TPS Limit (4) | Supports Virtual EnvironmentEnvironment (7) | Cores (1) | RAM (3) | Storage |
---|---|---|---|---|---|---|---|
Developer | Development | Developers only. In rare cases can be used for functional POCs. | 2-3 TPS | Can be virtual | 2 cores | 4 GB | Single disk: 25GB |
Standard | Minimal | POCs and Evaluation. | 5 TPS | Can be virtual | 4 cores | 18 GB | OS: 40 GB |
Standard | Low | Environment with low load levels | 40 TPS | Can be virtual | 6 cores | 32 GB | OS: 40 GB |
Standard | Medium | Environment with Moderate load | 80 TPS | Can be virtual | 8 cores | 64GB | OS: 40 GB |
Standard | High | Environment with Moderate load | 120 TPS | Can be virtual, but not recommended | 12 cores | 128GB | OS: 40 GB |
Standard | High_20dv | Environment with Medium load | 200 TPS Can be increased to 1500 TPS by adding resources(5) | Must be installed on a physical server | 16 cores | 200GB | OS: 40 GB |
Standard | High_20dv | Environment with High load | 1500 TPS(5) | Must be installed on a physical server | 24 cores(5) | 256GB | OS: 40 GB |
Standard | High_20dv | Environment with Very High load | 2750 TPS(6) | Must be installed on a physical server | TBD(6) | TBD(6) | TBD(6) |
Standard | Federated Architecture | Environment with Very High load | >2750 TPS - TBD(6) | Must be installed on physical servers | TBD(6) | TBD(6) | TBD(6) |
...
(6) To cater to 2750 TPS or more, customers will be provided with specifications after a sizing process with L3.
(7) Virtual deployments performance cannot be guaranteed. Virtual deployments performance depends on the server hosting the VM (ESX), its configuration, the overall load it is experiencing at any given time from any of its VMs, and especially the performance of the remote storage.
High Load capacity plan sizing example
...
- CentOS 7.7-7.8 - x86-64 bit only on supported HW or Hypervisor as stated above.
- RHEL 7.7-7.8 - x86-64 bit only on supported HW or Hypervisor as stated above.
- Server OS must be a fresh install without any other installed products.
- In Non-Appliance mode the OS support is not covered but recommendations will be provided.
- Other 3rd
Third-party software
products for backups, security, and monitoring may be installed. However, due to diversity their impact is unknownsuch as antivirus, cybersecurity, monitoring, APM, endpoint protection, backup, etc. might significantly decrease the performance of DPOD and impact its functionality.
During the resolution of issues, DPOD support will ask the customer to disable
theseany 3rd party
tools, so that issues may be isolated and DPOD verified tosoftware in order to isolate the issues and verify their source. Support
will notcannot be provided if the 3rd party tools are not disabled.
Client Requirements
DPOD's Web Console requires the following for administration and end-users:
...