Page Comparison

...

Install DPOD as described in one of the following installation procedures:

• For Appliance Mode:
  • Follow the procedure: Appliance Installation
  • During installation the user is prompted to choose the data disk type (SSD / non SSD). Choose the cell members disk type (should be SSD) instead of the cell manager disk type.
• For Non-appliance Mode:
  • Follow the procedure: Non-Appliance Installation
  • During installation, since the cell manager has two network interfaces (see prerequisites section), the user is prompted to choose the IP address for the Web Console. Choose the IP address of the external network interface. 

...

To update the service files, execute the following commandcommands:

sed -i 's#/usr/bin/numactl --membind=1 --cpunodebind=1#/usr/bin/numactl --membind=2 --cpunodebind=2#g' /etc/init.d/MonTier-es-raw-trans-Node-2
sed -i 's#/usr/bin/numactl --membind=1 --cpunodebind=1#/usr/bin/numactl --membind=3 --cpunodebind=3#g' /etc/init.d/MonTier-es-raw-trans-Node-3

To verify the NUMA configuration for all services, execute the following command:

grep numactl /etc/init.d/*

Updating service files for cell members with more than 384GB RAM

...

sed -i 's/^NODE_HEAP_SIZE=.*/NODE_HEAP_SIZE="64G"/g' /etc/init.d/MonTier-es-raw-trans-Node-2
sed -i 's/^NODE_HEAP_SIZE=.*/NODE_HEAP_SIZE="64G"/g' /etc/init.d/MonTier-es-raw-trans-Node-3
sed -i 's/^NODE_HEAP_SIZE=.*/NODE_HEAP_SIZE="64G"/g' /etc/init.d/MonTier-es-raw-trans-Node-4

Cell Member Federation Verification

After a successful federation, you will be able to see the new federated cell member in the Manage → System → Nodes page.
For example:

...